Related to 87731177 and Bug#47649.

Don't set Query_arena::STMT_EXECUTED for any error
code. skip_setup_conds() depends on STMT_INITIALIZED_FOR_SP, but
sp_lex_keeper::reset_lex_and_exec_core() sets it to STMT_EXECUTED on
ER_TABLE_NOT_LOCKED_FOR_WRITE. There are other error codes that can
break skip_setup_conds() (ER_IT_IS_A_VIEW, ER_NON_UPDATABLE_TABLE,
etc).

Unit prepare prematurely fixed field which must be fixed via
setup_conds() to correctly update table->covering_keys.

Call vers_setup_conds() directly instead, because actually everything
else is not needed.

Wrong assertion condition. SYSTEM_TIME_ALL indicates that
vers_setup_conds() is done. In case FOR SYSTEM_TIME ALL is specified
in command the assertion passes but not checks anything.

Don't do skip_setup_conds() unless all errors are checked.

Fixes following errors:
      ER_PERIOD_NOT_FOUND
      ER_VERS_QUERY_IN_PARTITION
      ER_VERS_ENGINE_UNSUPPORTED
      ER_VERS_NOT_VERSIONED

MDEV-21011 Table corruption reported for versioned partitioned table after DELETE: "Found a misplaced row"

LIMIT history partitions cannot be checked by existing algorithm of
check_misplaced_rows() because working history partition is
incremented each time another one is filled. The existing algorithm
gets record and tries to decide partition id for it by
get_partition_id(). For LIMIT history it will just get first
non-filled partition.

To fix such partitions it is required to do REBUILD instead of REPAIR.

When view is merged by DT_MERGE_FOR_INSERT it is then skipped from
processing and doesn't update WHERE clause with
vers_setup_conds(). Note that view itself cannot work in
vers_setup_conds() because it doesn't have row_start, row_end
fields. Thus it is required to descend down to material TABLE_LIST
through calls of mysql_derived_prepare() and run vers_setup_conds()
from there. Luckily, all views (views of views, views of views of
views, etc.) are linked in one list through next_global pointer, so we
can skip all views of views and get straight to non-view TABLE_LIST by
checking its merge_underlying_list property for zero value (it is
assigned by DT_MERGE_FOR_INSERT for merged derived tables).

We have to do that only for UPDATE and DELETE. Other DML commands
don't use WHERE clause.

MDEV-21146 Assertion `m_lock_type == 2' in handler::ha_drop_table upon LOAD DATA

LOAD DATA does not use WHERE and the above call of vers_setup_conds()
is not needed. unit->prepare() led to wrongly locked temporary table.

"write set" for replication finally got its correct place
(mark_columns_per_binlog_row_image()). When done generally in
mark_columns_needed_for_update() it affects optimization
algorithm. used_key_is_modified, query_plan.using_io_buffer are
wrongly set and that leads to wrong prepare_for_keyread() which limits
read_set.

Turn read cache off for update and multi-update for versioned
table. no_cache is reinited on each TABLE open because it is
applicable for specific algorithms.

As a side fix vers_insert_history_row() honors vers_write setting.

Aria with row_format=fixed uses IO_CACHE of type READ_CACHE for
sequential read in update loop. When history row is inserted inside
this loop the cache misses it and fails with error.

TODO:

Currently maria_extra() does not support SEQ_READ_APPEND. Probably it
might be possible to use this type of cache.

generalize the replacement

This reverts commit 0d345ec2.

Upgrades from 8.0 don't work yet, one has to dump/restore
manually to get the metadata out of the data dictionary.

mariadb packages conflict with mysql-8.0

Obsoletes: cannot contain (x86-64) anymore

Python shebang must be specific

Use my_thread_var::stack_ends_here inside lf_pinbox_real_free() for address
where thread stack ends.

Remove LF_PINS::stack_ends_here.
It is not safe to assume that mysys_var that was used during pin allocation,
remains correct during free. E.g with binlog group commit in Innodb,
that frees pins for multiple Innodb transactions, it does not work
correctly.

Prior to this fix, when matching addresses using mask,
extra bits could be used for  comparison, e.g to
match with "a.b.c.d/24" , 27 bits were compared rather than 24.

The patch fixes the calculation.

As part of commit 3c09f148
trx_undo_commit_cleanup() was always invoked with noredo=true.

The impact of this should be that some undo log pages may not be
correctly freed if the server is killed and crash recovery will be
performed. Similarly, if mariabackup --backup is being executed
concurrently with user transaction commits, it could happen that some
undo log pages in the backup will never be marked as free for reuse.

It seems that this bug should not have any user-visible
impact other than some undo pages being wasted.

Use my_localhost instead of NULL for share->hostname.

MDEV-18957 UPDATE with LIMIT clause is wrong for versioned partitioned tables

UPDATE, DELETE: replace linear search of current/historical records
with vers_setup_conds().

Additional DML cases in view.test

row_log_table_get_pk_col(): read instant field value from instant
alter table when it's required.

For ROW_FORMAT=REDUNDANT, we must reserve fixed-length dummy values
for the CHAR columns in the metadata record. This is because in
MariaDB Server 10.4, btr_cur_instant_init_low() will rely on
dict_index_t::trx_id_offset being accurate for the metadata record.

In MariaDB Server 10.4, btr_cur_instant_init_low() assumes that
all PRIMARY KEY columns that are internally variable-length will
be encoded in 0 bytes in the metadata record. Sometimes, CHAR
columns can be encoded as variable-length. We should not
unnecessarily reserve space for a dummy string value in the
metadata record.

Do not fail fi all the partitions were pruned out.

The fix consists of three commits backported from 10.3:

1) Cleanup isnan() portability checks

(cherry picked from commit 7ffd7fe9)

2) Cleanup isinf() portability checks

Original problem reported by Wlad: re-compilation of 10.3 on top of 10.2
build would cache undefined HAVE_ISINF from 10.2, whereas it is expected
to be 1 in 10.3.

std::isinf() seem to be available on all supported platforms.
(cherry picked from commit bc469a0b)

3) Use std::isfinite in C++ code

This is addition to parent revision fixing build failures.

(cherry picked from commit 54999f4e)

DropIndex, CreateIndex: Remove. The file row0trunc.cc only exists
in MariaDB Server 10.3 so that the crash recovery of TRUNCATE TABLE
operations from older 10.2 and 10.3 servers will work. This dead code
was being used for implementing the MySQL 5.7 WL#6501 TRUNCATE TABLE
that was replaced with a backup-safe implementation in MDEV-13564.

buf_read_ibuf_merge_pages(): Discard any page numbers that are
outside the current bounds of the tablespace, by invoking the
function ibuf_delete_recs() that was introduced in MDEV-20934.
This could avoid an infinite change buffer merge loop on
innodb_fast_shutdown=0, because normally the change buffer merge
would only be attempted if a page was successfully loaded into
the buffer pool.

dict_drop_index_tree(): Add the parameter trx_t*.
To prevent the DROP TABLE crash, do not invoke btr_free_if_exists()
if the entire .ibd file will be dropped. Thus, we will avoid a crash
if the BTR_SEG_LEAF or BTR_SEG_TOP of the index is corrupted,
and we will also avoid unnecessarily accessing the to-be-dropped
tablespace via the buffer pool.

In MariaDB 10.2, we disable the DROP TABLE fix if innodb_safe_truncate=0,
because the backup-unsafe MySQL 5.7 WL#6501 form of TRUNCATE TABLE
requires that the individual pages be freed inside the tablespace.

Fix partitioning and DS-MRR to work together

- In ha_partition::index_end(): take into account that ha_innobase (and
  other engines using DS-MRR) will have inited=RND when initialized for
  DS-MRR scan.
- In ha_partition::multi_range_read_next(): if the MRR scan is using
  HA_MRR_NO_ASSOCIATION mode, it is not guaranteed that the partition's
  handler will store anything into *range_info.
- In DsMrr_impl::choose_mrr_impl(): ha_partition will inquire partitions
  about how much memory their MRR implementation needs by passing
  *buffer_size=0. DS-MRR code didn't know about this (actually it used
  uint for buffer size calculation and would have an under-flow).
  Returning *buffer_size=0 made ha_partition assume that partitions do
  not need MRR memory and pass the same buffer to each of them.

  Now, this is fixed. If DS-MRR gets *buffer_size=0, it will return
  the amount of buffer space needed, but not more than about
  @@mrr_buffer_size.

* Fix ha_{innobase,maria,myisam}::clone. If ha_partition uses MRR on its
  partitions, and partition use DS-MRR, the code will call handler->clone
  with TABLE (*NOT partition*) name as an argument.
  DS-MRR has no way of knowing the partition name, so the solution was
  to have the ::clone() function for the affected storage engine to ignore
  the name argument and get it elsewhere.

using create_w_max_indexes_64.result as a template

Apart from page latches (buf_block_t::lock), mini-transactions
are keeping track of at most one dict_index_t::lock and
fil_space_t::latch at a time, and in a rare case, purge_sys.latch.

Let us introduce interfaces for acquiring an index latch
or a tablespace latch.

In a later version, we may want to introduce mtr_t members
for holding a latched dict_index_t* and fil_space_t*,
and replace the remaining use of mtr_t::m_memo
with std::set<buf_block_t*> or with a map<buf_block_t*,byte*>
pointing to log records.

In the test innodb.instant_alter,4k we would be flagging an error
for too large row size. That error was previously only being reported
if the table was being rebuilt. Thus, this merge is fixing a small
omission in MDEV-11369 (instant ADD COLUMN).

Fix incorrect change introduced in the fix for MDEV-20109.

The patch tried to compute a more precise estimate for the record_count
value in SJ-Materialization-Scan strategy (in
Sj_materialization_picker::check_qep).  However the new formula is worse
as it produces extremely optimistic results in common cases where
SJ-Materialization-Scan should be used)

The old formula produces pessimistic results in cases when Sj-Materialization-
Scan is unlikely to be a good choice anyway. So, the old behavior is better.

Move row size check to early CREATE/ALTER TABLE phase. Stop checking
on table open.

dict_index_add_to_cache(): remove parameter 'strict', stop checking row size

dict_index_t::record_size_info_t: this is a result of row size check operation

create_table_info_t::row_size_is_acceptable(): performs row size check.
Issues error or warning. Writes first overflow field to InnoDB log.

create_table_info_t::create_table(): add row size check

dict_index_t::record_size_info(): this is a refactored version
of dict_index_t::rec_potentially_too_big(). New version doesn't change global
state of a program but return all interesting info. And it's callers who
decide how to handle row size overflow.

dict_index_t::rec_potentially_too_big(): removed

memo_block_unfix(), memo_latch_release(): Merge to ReleaseLatches.

memo_slot_release(), ReleaseAll: Clean up the formatting.

A search with PAGE_CUR_GE may land on the supremum record on
a leaf page that is not the rightmost leaf page.
This could occur when all keys on the current page are
smaller than the search key, and the smallest key on the
successor page is larger than the search key.

ibuf_delete_recs(): Correct the debug assertion accordingly.

Closes #1407

mtr_t::Impl, mtr_t::Command: Merge to mtr_t.

MTR_MAGIC_N: Remove.

MTR_STATE_COMMITTING: Remove. This state was only being set
internally during mtr_t::commit().

mtr_t::Command::m_locks_released: Remove (set-and-never-read member).

mtr_t::Command::m_start_lsn: Replaced with the return value of
finish_write() and a parameter to release_blocks().

mtr_t::Command::m_end_lsn: Removed as a duplicate of mtr_t::m_commit_lsn.

mtr_t::Command::prepare_write(): Replace a switch () with a
comparison against 0. Only 2 m_log_mode are allowed.