Commit 60f974ba authored by Kirill Smelkov's avatar Kirill Smelkov

.

parent 3d6fb6ec
...@@ -3,83 +3,6 @@ ...@@ -3,83 +3,6 @@
"$schema": "http://json-schema.org/draft-04/schema", "$schema": "http://json-schema.org/draft-04/schema",
"title": "Input Parameters", "title": "Input Parameters",
"properties": { "properties": {
"nr_bandwidth": {
"title": "Bandwidth",
"description": "Downlink Bandwidth (in MHz)",
"type": "number",
"default": {{ default_nr_bandwidth }}
},
"n_antenna_dl": {
"title": "Number of DL antennas",
{%- if bbu == 'ors' %}
"description": "1 or 2. Number of DL antennas.",
{%- else %}
"description": "1, 2, 4 or 8. Number of DL antennas.",
{%- endif %}
"type": "number",
"default": {{ default_n_antenna_dl }}
},
"n_antenna_ul": {
"title": "Number of UL antennas",
{%- if bbu == 'ors' %}
"description": "1 or 2. Number of UL antennas.",
{%- else %}
"description": "1, 2, 4 or 8. Number of UL antennas.",
{%- endif %}
"type": "number",
"default": {{ default_n_antenna_ul }}
},
{%- if rf_mode == 'tdd' %}
"tdd_ul_dl_config": {
"title": "TDD",
"description": "TDD",
"type": "string",
"enum": [
"5ms 2UL 7DL 4/6 (default)",
"2.5ms 1UL 3DL 2/10",
"5ms 8UL 1DL 2/10 (maximum uplink)"
],
"default": "5ms 2UL 7DL 4/6 (default)"
},
{%- endif %}
"dl_nr_arfcn": {
"title": "DL NR ARFCN",
"description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
"type": "number"
},
"nr_band": {
"title": "NR band",
"description": "NR band number",
"type": "number"
},
"ssb_pos_bitmap": {
"title": "SSB Position Bitmap",
"description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
"type": "string",
"default": {{ default_nr_ssb_pos_bitmap }}
},
"pci": {
"title": "Physical Cell ID",
"description": "Physical Cell ID",
"type": "number",
"default": 500
},
"cell_id": {
"title": "Cell ID",
"description": "Cell ID",
"type": "string",
"default": "0x01"
},
"tx_gain": {
"title": "Tx gain",
"description": "Tx gain (in dB)",
"type": "number"
},
"rx_gain": {
"title": "Rx gain",
"description": "Rx gain (in dB)",
"type": "number"
},
"gnb_id": { "gnb_id": {
"title": "gNB ID", "title": "gNB ID",
"description": "gNB ID", "description": "gNB ID",
...@@ -266,80 +189,6 @@ ...@@ -266,80 +189,6 @@
}, },
"type": "object", "type": "object",
"default": {} "default": {}
},
"websocket_password": {
"title": "Websocket password",
"description": "Activates websocket for remote control and sets password",
"type": "string"
},
"inactivity_timer": {
"title": "Inactivity Timer",
"description": "Send RRC connection release after this time (in ms) of network inactivity.",
"type": "number",
"default": {{ default_nr_inactivity_timer }}
},
"log_phy_debug": {
"title": "Physical layer log debug",
"description": "Enable debug mode for physical layer logs",
"type": "boolean",
"default": false
},
"gps_sync": {
"default": false,
"title": "GPS synchronisation",
"description": "True if GPS should be used for synchronisation",
"type": "boolean"
},
"disable_sdr": {
"default": false,
"title": "Disable SDR",
"description": "Disables radio",
"type": "boolean"
},
"use_ipv4": {
"default": false,
"title": "Use IPv4",
"description": "Set to true to use IPv4 for AMF / MME addresses",
"type": "boolean"
},
"gnb_stats_fetch_period": {
"title": "gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
"type": "number",
"default": 60
},
"gnb_drb_stats_enabled": {
"title": "Enable gNB drb statistics",
"description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
"type": "boolean",
"default": true
},
"max_rx_sample_db": {
"title": "Maximum RX sample value (dB)",
"description": "Maximum RX sample threshold above which RX saturated promise will fail",
"type": "number",
"default": 0
},
"min_rxtx_delay": {
"title": "Minimum available time for radio front end processing (ms)",
"description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
"type": "number",
"default": 0
},
"xlog_fluentbit_forward_host": {
"title": "Address to Forward Xlog by Fluenbit",
"description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_port": {
"title": "Port to Forward Xlog by Fluentbit",
"description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
"type": "string"
},
"xlog_fluentbit_forward_shared_key": {
"title": "Shared Key to Forward Xlog by Fluentbit",
"description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
"type": "string"
} }
} }
} }
...@@ -119,7 +119,7 @@ ...@@ -119,7 +119,7 @@
}, },
"disable_sdr": { "disable_sdr": {
"default": false, "default": false,
"title": "Disable SDR", "title": "Disable SDR XXX kill ?",
"description": "Disables radio", "description": "Disables radio",
"type": "boolean" "type": "boolean"
}, },
...@@ -130,8 +130,8 @@ ...@@ -130,8 +130,8 @@
"type": "boolean" "type": "boolean"
}, },
"enb_stats_fetch_period": { "enb_stats_fetch_period": {
"title": "eNB statistics fetch period (seconds)", "title": "eNB/gNB statistics fetch period (seconds)",
"description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics", "description": "Describes how often a call to Amarisoft remote API is made to get eNB/gNB statistics",
"type": "number", "type": "number",
"default": 60 "default": 60
}, },
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment