switch to ubuntu 13.04 for more stability

software/openstack/instance-main.cfg

@@ -315,7 +315,8 @@ virtual-hard-drive-md5sum =
 
 cpu-count = 4
 nbd-port = 1024
-nbd-host = 2001:470:1f14:169:dd6b:3f84:9205:c750
+#Use Ubuntu 13.04 server
+nbd-host = 2001:470:1f14:169:dd6b:3f84:9205:6218
 nbd2-port = 1024
 nbd2-host =
   
@@ -329,6 +330,3 @@ glance-image-name = cirros-0.3.1-x86_64
 domain =
 virtual-hard-drive-url =
 virtual-hard-drive-md5sum =
-
-#Using devstack to auto install openstack. We just specify here the commit to use
-#devstack-revision = 
\ No newline at end of file

software/openstack/software.cfg

@@ -154,103 +154,3 @@ signature-certificate-list =
   -----END CERTIFICATE-----
 
 [versions]
-Jinja2 = 2.7.1
-MarkupSafe = 0.18
-Werkzeug = 0.9.4
-apache-libcloud = 0.13.2
-async = 0.6.1
-buildout-versions = 1.7
-gitdb = 0.5.4
-itsdangerous = 0.23
-lxml = 3.2.3
-meld3 = 0.6.10
-paramiko = 1.12.0
-plone.recipe.command = 1.1
-pycrypto = 2.6
-slapos.recipe.build = 0.12
-slapos.recipe.cmmi = 0.2
-slapos.recipe.download = 1.0.dev-r4053
-slapos.recipe.template = 2.5
-slapos.toolbox = 0.37
-smmap = 0.8.2
-websockify = 0.5.1
-z3c.recipe.scripts = 1.0.1
-
-# Required by:
-# slapos.core==0.35.1
-# slapos.toolbox==0.37
-Flask = 0.10.1
-
-# Required by:
-# slapos.toolbox==0.37
-GitPython = 0.3.2.RC1
-
-# Required by:
-# slapos.toolbox==0.37
-atomize = 0.1.1
-
-# Required by:
-# paramiko==1.12.0
-ecdsa = 0.9
-
-# Required by:
-# slapos.toolbox==0.37
-feedparser = 5.1.3
-
-# Required by:
-# slapos.cookbook==0.83.1
-inotifyx = 0.2.0-1
-
-# Required by:
-# slapos.cookbook==0.83.1
-lock-file = 2.0
-
-# Required by:
-# slapos.cookbook==0.83.1
-netaddr = 0.7.10
-
-# Required by:
-# slapos.core==0.35.1
-netifaces = 0.8-1
-
-# Required by:
-# websockify==0.5.1
-numpy = 1.7.1
-
-# Required by:
-# slapos.toolbox==0.37
-psutil = 1.1.0
-
-# Required by:
-# slapos.core==0.35.1
-pyflakes = 0.7.3
-
-# Required by:
-# slapos.cookbook==0.83.1
-pytz = 2013.7
-
-# Required by:
-# slapos.cookbook==0.83.1
-# slapos.toolbox==0.37
-slapos.core = 0.35.1
-
-# Required by:
-# slapos.core==0.35.1
-supervisor = 3.0
-
-# Required by:
-# slapos.core==0.35.1
-unittest2 = 0.5.1
-
-# Required by:
-# slapos.cookbook==0.83.1
-# slapos.toolbox==0.37
-xml-marshaller = 0.9.7
-
-# Required by:
-# slapos.core==0.35.1
-zope.interface = 4.0.5
-cliff = 1.4.5
-cmd2 = 0.6.7
-pyparsing = 2.0.1
-requests = 2.0.0
\ No newline at end of file

software/openstack/templates/stack_controller_grizzly.sh.in

@@ -2,25 +2,20 @@
 
 #stack_controller_grizzly.sh: Should install and configure all needed openstack packages.
 #This script should work on SlapOS environment, using a Virtual Machine
-# Warning: this script has been tested only on Ubuntu 12.04.
-
-#sudo su
+# Warning: this script may not work on Ubuntu 12.04 - Use ubuntu 13.04
 
 export DEBIAN_FRONTEND=noninteractive
 
-apt-get -y install ubuntu-cloud-keyring python-software-properties software-properties-common python-keyring
-echo deb http://ubuntu-cloud.archive.canonical.com/ubuntu precise-updates/grizzly main >> /etc/apt/sources.list.d/grizzly.list
-
 apt-get update
-apt-get -y upgrade
-apt-get -y dist-upgrade
+apt-get upgrade -y
+apt-get dist-upgrade -y
 
 
 ###############################################################################################
 #####  Configure Network
 ###############################################################################################
 
-apt-get install -y openvswitch-switch openvswitch-datapath-lts-raring-dkms
+apt-get install -y openvswitch-switch openvswitch-datapath-dkms
 apt-get install -y vlan bridge-utils
 
 #br-int will be used for VM integration
@@ -89,9 +84,21 @@ sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf
 # To save you from rebooting, perform the following
 sysctl net.ipv4.ip_forward=1
 
-iptables --table nat --append POSTROUTING --out-interface eth1 -j MASQUERADE
+iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE
+iptables --append FORWARD --in-interface br-ex -j ACCEPT
+
+#Add iptable command to rc.local to allow auto reconfiguring of network NAT after reboot
+sudo sed -n '$!p' /etc/rc.local > temp-rc.local
+sudo mv temp-rc.local /etc/rc.local
+sudo chmod +x /etc/rc.local
+/bin/cat << EOF >> /etc/rc.local
+
+iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE
 iptables --append FORWARD --in-interface br-ex -j ACCEPT
 
+exit 0
+EOF
+
 ###############################################################################################
 #####  Variables to use
 ###############################################################################################
@@ -129,7 +136,13 @@ apt-get install -y rabbitmq-server
 
 apt-get install -y ntp
 
-sed -i 's/server ntp.ubuntu.com/server ntp.ubuntu.com\nserver 127.127.1.0\nfudge 127.127.1.0 stratum 10/g' /etc/ntp.conf
+#Comment the ubuntu NTP servers
+sed -i 's/server 0.ubuntu.pool.ntp.org/#server 0.ubuntu.pool.ntp.org/g' /etc/ntp.conf
+sed -i 's/server 1.ubuntu.pool.ntp.org/#server 1.ubuntu.pool.ntp.org/g' /etc/ntp.conf
+sed -i 's/server 2.ubuntu.pool.ntp.org/#server 2.ubuntu.pool.ntp.org/g' /etc/ntp.conf
+sed -i 's/server 3.ubuntu.pool.ntp.org/#server 3.ubuntu.pool.ntp.org/g' /etc/ntp.conf
+
+sed -e 's/server ntp.ubuntu.com/server $PUBLIC_ADDRESS/g' /etc/ntp.conf
 service ntp restart
 
 sleep 1.5
@@ -320,6 +333,13 @@ sed -e "s/^auth_host *=.*/auth_host = $HOST_IP/" \
 	-e "s/%SERVICE_PASSWORD%/$ADMIN_PASSWORD/" \
 	$CONF.orig > $CONF
 
+echo "Giving quantum user passwordless sudo privileges"
+# UEC images ``/etc/sudoers`` does not have a ``#includedir``, add one
+grep -q "^#includedir.*/etc/sudoers.d" /etc/sudoers ||
+    echo "#includedir /etc/sudoers.d" >> /etc/sudoers
+( umask 226 && echo "quantum ALL=(ALL) NOPASSWD:ALL" \
+    > /etc/sudoers.d/quantum_sudoers )
+
 
 cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
 sleep 1.5
@@ -348,6 +368,8 @@ cgroup_device_acl = [
 ]
 EOF
 
+service dbus restart && service libvirt-bin restart
+sleep 1.5
 virsh net-destroy default
 virsh net-undefine default
 
@@ -599,7 +621,7 @@ quantum l3-agent-router-add $L3_AGENT_ID router_$PROJECT
 quantum router-interface-add $ROUTER_ID $SUBNET_ID
 
 cd /etc/init.d/; for i in $( ls quantum-* ); do sudo service $i restart; done
-sleep 2
+sleep 8
 cd $CURRENT_DIR
 chmod +x network.py
 EXT_NET_ID=$(get_id quantum net-create --tenant-id $ADMIN_ROLE ext_net --router:external=True)