Commit 8a8ddf1e authored by Kirill Smelkov's avatar Kirill Smelkov

.

parent 55756877
No related merge requests found
......@@ -87,10 +87,11 @@ type Conn struct {
down chan struct{} // ready when Conn is marked as no longer operational
downOnce sync.Once // shutdown may be called by both Close and nodelink.shutdown
rxerrOnce sync.Once // IO error is reported only once - then it is link down or closed
rxerrOnce sync.Once // rx error is reported only once - then it is link down or closed
closed uint32 // whether Close was called
}
var ErrLinkClosed = errors.New("node link is closed") // operations on closed NodeLink
var ErrLinkDown = errors.New("node link is down") // e.g. due to IO error
var ErrLinkNoListen = errors.New("node link is not listening for incoming connections")
......@@ -180,7 +181,7 @@ func (nl *NodeLink) NewConn() (*Conn, error) {
}
// shutdown closes peerLink and marks NodeLink as no longer operational
// it also shutdowns and all active Conns.
// it also shutdowns and all opened connections over this node link.
func (nl *NodeLink) shutdown() {
nl.downOnce.Do(func() {
close(nl.down)
......@@ -231,7 +232,7 @@ func (c *Conn) shutdown() {
// Any blocked Send() or Recv() will be unblocked and return error
//
// NOTE for Send() - once transmission was started - it will complete in the
// background on the wire not to break framing.
// background on the wire not to break node-node link framing.
func (c *Conn) Close() error {
// adjust nodeLink.connTab
c.nodeLink.connMu.Lock()
......@@ -257,7 +258,7 @@ func (nl *NodeLink) Accept() (*Conn, error) {
}
return nil, ErrLinkDown // XXX test
case c := <-nl.acceptq: // XXX -> only c, ok := <-nl.acceptq ?
case c := <-nl.acceptq:
return c, nil
}
}
......
......@@ -329,15 +329,15 @@ func TestNodeLink(t *testing.T) {
xclose(c12)
xclose(nl2)
// NodeLink.Close vs Conn.Send/Recv on another side
nl1, nl2 = _nodeLinkPipe(0, linkNoRecvSend)
c11 = xnewconn(nl1)
c12 = xnewconn(nl1)
c13 := xnewconn(nl1)
// NodeLink.Close vs Conn.Send/Recv and Accept on another side
nl1, nl2 = _nodeLinkPipe(linkNoRecvSend, 0)
c21 := xnewconn(nl2)
c22 := xnewconn(nl2)
c23 := xnewconn(nl2)
wg = WorkGroup()
var errRecv error
wg.Gox(func() {
pkt, err := c11.Recv()
pkt, err := c21.Recv()
want1 := io.EOF // if recvPkt wakes up due to peer close
want2 := io.ErrClosedPipe // if recvPkt wakes up due to sendPkt wakes up first and closes nl1
if !(pkt == nil && (err == want1 || err == want2)) {
......@@ -348,81 +348,81 @@ func TestNodeLink(t *testing.T) {
})
wg.Gox(func() {
pkt := &PktBuf{[]byte("data")}
err := c12.Send(pkt)
want := io.ErrClosedPipe // always this in both due to peer close or recvPkt waking up and closing nl1
err := c22.Send(pkt)
want := io.ErrClosedPipe // always this in both due to peer close or recvPkt waking up and closing nl2
if err != want {
exc.Raisef("Conn.Send after peer NodeLink shutdown: %v", err)
}
})
tdelay()
xclose(nl2)
xclose(nl1)
xwait(wg)
// XXX denoise vvv
// NewConn after NodeLink stop
c, err = nl1.NewConn()
c, err = nl2.NewConn()
if err != ErrLinkDown {
t.Fatalf("NewConn after NodeLink stop: %v", err)
}
// Recv/Send on another Conn
pkt, err = c13.Recv()
pkt, err = c23.Recv()
if !(pkt == nil && err == errRecv) {
t.Fatalf("Conn.Recv 2 after peer NodeLink shutdown: pkt = %v err = %v", pkt, err)
}
err = c13.Send(&PktBuf{[]byte("data")})
err = c23.Send(&PktBuf{[]byte("data")})
if err != ErrLinkDown {
t.Fatalf("Conn.Send 2 after peer NodeLink shutdown: %v", err)
}
// Recv/Send error on second call
pkt, err = c11.Recv()
pkt, err = c21.Recv()
if !(pkt == nil && err == ErrLinkDown) {
t.Fatalf("Conn.Recv after NodeLink stop: pkt = %v err = %v", pkt, err)
}
err = c12.Send(&PktBuf{[]byte("data")})
err = c22.Send(&PktBuf{[]byte("data")})
if err != ErrLinkDown {
t.Fatalf("Conn.Send after NodeLink stop: %v", err)
}
xclose(c13)
xclose(c23)
// Recv/Send on closed Conn but not closed NodeLink
pkt, err = c13.Recv()
pkt, err = c23.Recv()
if !(pkt == nil && err == ErrClosedConn) {
t.Fatalf("Conn.Recv after close but only stopped NodeLink: pkt = %v err = %v", pkt, err)
}
err = c13.Send(&PktBuf{[]byte("data")})
err = c23.Send(&PktBuf{[]byte("data")})
if err != ErrClosedConn {
t.Fatalf("Conn.Send after close but only stopped NodeLink: %v", err)
}
xclose(nl1)
xclose(nl2)
// Recv/Send error after NodeLink close
pkt, err = c11.Recv()
pkt, err = c21.Recv()
if !(pkt == nil && err == ErrLinkClosed) {
t.Fatalf("Conn.Recv after NodeLink stop: pkt = %v err = %v", pkt, err)
}
err = c12.Send(&PktBuf{[]byte("data")})
err = c22.Send(&PktBuf{[]byte("data")})
if err != ErrLinkClosed {
t.Fatalf("Conn.Send after NodeLink stop: %v", err)
}
// NewConn after NodeLink close
c, err = nl1.NewConn()
c, err = nl2.NewConn()
if err != ErrLinkClosed {
t.Fatalf("NewConn after NodeLink close: %v", err)
}
xclose(c11)
xclose(c12)
xclose(c21)
xclose(c22)
// Recv/Send error after Close & NodeLink shutdown
pkt, err = c11.Recv()
pkt, err = c21.Recv()
if !(pkt == nil && err == ErrClosedConn) {
t.Fatalf("Conn.Recv after close and NodeLink close: pkt = %v err = %v", pkt, err)
}
err = c12.Send(&PktBuf{[]byte("data")})
err = c22.Send(&PktBuf{[]byte("data")})
if err != ErrClosedConn {
t.Fatalf("Conn.Send after close and NodeLink close: %v", err)
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment