Debian packaging in progress

MANIFEST.in

 graft docs
-include TODO
+include TODO, CHANGES

README

@@ -16,9 +16,10 @@ network, by creating tunnels on the fly, and then routing targeted traffic
 through these tunnels.
 
 re6stnet can be used to :
+
 - guarantee connectedness between computers connected to the
-internet, for which there exists a working route ( in case the direct route
-isn't available ).
+  internet, for which there exists a working route ( in case the direct route
+  isn't available ).
 - create very large networks
 - give ipv6 addresses to machines with only ipv4 available
 
@@ -80,21 +81,21 @@ Later....
 
 .. XXX: write monkey-patch in __init__.py
 
-Note: On certain version of python (e.g. 2.7.3~rc2-2.1 ) dns lookup is
+  Note: On certain version of python (e.g. 2.7.3~rc2-2.1 ) dns lookup is
         performed for each request, and cause a delay in response.
         To avoid this, one can either upgrade python, fix their resolv.conf or use
         the fix at the end of this file.
 
---------------------------------------------------------------------------------
-# Fix for librpcxml to avoid doing reverse dns on each request
-# it was causing a 10s delay on each request when no reverse DNS was avalaible
-import BaseHTTPServer
+  --------------------------------------------------------------------------------
+  # Fix for librpcxml to avoid doing reverse dns on each request
+  # it was causing a 10s delay on each request when no reverse DNS was avalaible
+  import BaseHTTPServer
 
 
-def not_insane_address_string(self):
+  def not_insane_address_string(self):
       host, port = self.client_address[:2]
       return '%s (reverse DNS disabled)' % host  # used to call: socket.getfqdn(host)
 
-BaseHTTPServer.BaseHTTPRequestHandler.address_string = not_insane_address_string
+  BaseHTTPServer.BaseHTTPRequestHandler.address_string = not_insane_address_string
 
---------------------------------------------------------------------------------
+  --------------------------------------------------------------------------------

debian/changelog

+re6stnet (0.1-1) nexedi; urgency=low
+
+  * source package automatically created by stdeb 0.6.0+git
+
+ -- Guillaume Bury <guillaume.bury@gmail.com>  Wed, 01 Aug 2012 15:05:30 +0200

debian/compat

+7

debian/control

+Source: re6stnet
+Maintainer: Julien Muchembled <jm@nexedi.com>
+Section: net
+Priority: optional
+Build-Depends: python-setuptools (>= 0.6b3), python-all (>= 2.6.6-3), debhelper (>= 7.4.3)
+Standards-Version: 3.9.1
+
+Package: re6stnet
+Architecture: all
+Depends: ${misc:Depends}, ${python:Depends}, openvpn, babeld, openssl
+Description: resilient, scalable, IPv6 network application

debian/rules

+#!/usr/bin/make -f
+# -*- makefile -*-
+MANPAGELIST := $(patsubst %.rst, %.1, $(wildcard docs/*.rst))
+
+# Uncomment this to turn on verbose mode.
+export DH_VERBOSE=1
+
+override_dh_auto_clean:
+	dh_auto_clean
+	rm -f $(MANPAGELIST)
+
+%.1: %.rst
+	rst2man $< $@
+
+override_dh_installman: $(MANPAGELIST)
+	dh_installman $^
+
+%:
+	dh $@ --with python2 --buildsystem=python_distutils

debian/source/format

+3.0 (quilt)

docs/re6st-conf → docs/re6st-conf.rst

-OPTIONS : RE6ST-SETUP
-    usage : ./setup [options...]
-    --server address
+============
+ re6st-conf
+============
+
+-------------------------------
+Configuration tool for re6stnet
+-------------------------------
+
+:Author: Nexedi
+:Manual section: 1
+
+SYNOPSIS
+========
+
+``re6st-conf`` ``--server`` `server-url` ``--port`` `server-port`
+               [`command`] [`options`...]
+
+DESCRIPTION
+===========
+
+re6st-conf is a tool generating the files necessary for re6stnet to run. It
+connects to a distant server to generate the certificates files used by openvpn
+in re6stnet.
+
+USAGE
+=====
+
+re6st-conf requires data about a distant server running re6st-registry.
+
+--server address
              Ip address of the machine running the re6stnet server. Both ipv4
              and ipv6 addresses are supported.
 
-    --port port
+--port port
              Port to connect to on the machine running the re6stnet server.
 
-    -d, --dir directory
+Commands
+--------
+
+You may give at most one of the following commands. Giving the two commands
+will not raise any errors, but does not have any meaning.
+
+--email email-address
+            The email address to associate with your certificates. Refrain
+            re6st-conf from asking you your email address in a prompt. Useful
+            for automatizing the configuration process.
+            re6st-conf will ask you the token you received by email.
+
+--token token
+            Give your token if you have already received one but did not
+            complete the configuration process. re6st-conf will not ask you
+            anything. If you use this option, you do not need to give your
+            email address.
+
+Options
+-------
+
+-d, ``--dir`` `directory`
             Path of a directory where will be stored the files generated by the
             setup. The Setup genereates the following files, in the explicit
             order :
@@ -17,23 +65,18 @@ OPTIONS : RE6ST-SETUP
             - cert.crt : individual certificate file generated by the server
             - dh2048.pem : dh file for oenvpn server
 
-    -r, --req name value
+
+-r, ``--req`` `name` `value`
             Specify an attribute to add to the certificate request sent to the
             server. Can be used multiple times.
             Each use of the --req name value, will add the attribute name with
             the associated value in the sugbject of the certificate request.
 
-    --ca-only
+--ca-only
             Stop the script after downloading the certificate authority file
             from the server
 
-    --db-only
-            Stop the script after creating the peers DB and downloading the
-            connection information of a bootstrap node of the VPN.
-
-    --no-boot
-            Does not re'quest a bootstrap peer to the peer discovery server
-            (useful in debug when the server does not have any peer in his
-            database). When requesting a bootstrap peer to a server whoch does
-            not have any, an execption will occur, and the script will stop
+SEE ALSO
+========
 
+``re6stnet``\ (1), ``re6st-registry``\ (1)

docs/re6st-registry → docs/re6st-registry.rst

-OPTIONS : RE6ST-REGISTRY
-    usage : ./registry port [options...]
-    port
-            The port on which the server will listen
+================
+ re6st-registry
+================
 
-    --private ip
-            Ipv6 address of the re6stnet client running on the machine. This
-            address will be advertised only to nodes having a valid
-            certificate.
+--------------------------------
+ Server application for re6snet
+--------------------------------
+
+:Author: Nexedi
+:Manual section: 1
+
+SYNOPSIS
+========
 
-    --db path
+``re6st-registry`` `port` ``--db`` `db-path` ``--ca`` `ca-path`
+                   ``--key`` `key-path` ``--mailhost`` `mailhost`
+                   ``--private`` `private-ip` [`options`...]
+
+DESCRIPTION
+===========
+
+re6st-registry is a server for the re6st network. Its role is to deliver
+vertificates to new nodes, and to maintain the complete table of peers, so it
+can send part of it to nodes asking for new peers.
+As of now, only one re6st-registry per re6st network should run. The node
+running the re6st-registry must also have a client ( re6stnet ) running.
+
+USAGE
+=====
+
+The re6st-registry will automatically listen on both ipv4 and ipv6 for incomming
+request.
+
+port
+            The port on which the server will listen
+
+--db path
             Path to the server Database file. A new DB file will be created
             and correctly initialized if the file doesn't exists.
             One can give ":memory" as path, the database is then temporary
 
-    --ca path
+--ca path
             Path to the certificate authority file. The certificate authority
             MUST contain the VPN network prefix in its serial number. To
             generate correct ca and key files for the 2001:db8:42:: prefix,
@@ -21,11 +47,23 @@ OPTIONS : RE6ST-REGISTRY
             openssl req -nodes -new -x509 -key ca.key -set_serial \
                     0x120010db80042 -days 365 -out ca.crt
 
-    --key path
+--key path
             Path to the server key file. To generate a key file, see the --ca
             option
 
-    --bootstrap prefix ip port proto
+--mailhost mailhost
+            Mailhost to be used to send email containing token for registration
+
+--private ip
+            Ipv6 address of the re6stnet client running on the machine. This
+            address will be advertised only to nodes having a valid
+            certificate.
+
+Options
+-------
+
+
+--bootstrap prefix ip port proto
             Connection informations of a node given to other as a bootstrap
             node to initiate connection with the network.
             Prefix should be the prefix number of a node, given in binary and
@@ -33,5 +71,7 @@ OPTIONS : RE6ST-REGISTRY
             2001:db8:42:1::/64 ( asusming a network prefix 2001:db8:42::/48 )
             corresponds to a prefix 1/16 i.e 0000000000000001.
 
-    --mailhost mailhost
-            Mailhost to be used to send email containing token for registration
+SEE ALSO
+========
+
+``re6stnet``\ (1), ``re6st-conf``\ (1)

docs/re6stnet → docs/re6stnet.rst

-OPTIONS : RES6NET
-    usage : ./re6stnet.py [options...]
-    --ip address port proto
+==========
+ re6stnet
+==========
+
+---------------------------------------------
+Resilient, Scalable, IPv6 Network application
+---------------------------------------------
+
+:Author: Nexedi
+:Manual section: 1
+
+SYNOPSIS
+========
+
+``re6stnet`` ``--registry`` `registry-url` ``--dh`` `dh-path`
+             ``--ca`` `ca-path` ``--cert`` `cert-path`
+             ``--key`` `key-path` [`options`...] [``--`` [`openvpn-options`...]]
+
+DESCRIPTION
+===========
+
+re6stnet is a client connecting to the re6st network. It establishes connections
+with other nodes and create a resilient network, whose nodes all have ipv6
+addresses. The goal of re6stnet is to create very large networks, guaranteeing
+bandwidth between nodes and giving ipv6 to computers.
+
+USAGE
+=====
+
+re6stnet needs information about certificates to start, as they contain data
+about the network and the ipv6 address of the node. These certificates can be
+obtained with the re6st-conf tool.
+
+--registry address
+           Complete public ( reachable from the internet ) address of the machine
+           running a registry. Will be used to get the pirvate address of the
+           registry and/or bootstrap peers
+           Examples : http://192.0.2.42:80, http://[2001:db8:42::1]:80
+
+--dh path
+            Path to the dh file to be used by the openvpn server
+            (for more information see the openvpn man page)
+
+--ca path
+            Path to the certificate authority file delivered by the re6stnet
+            server. The prefix of the re6st network is included in the serial
+            number of the file.
+
+--cert path
+            Path to the individual certificate file delivered by the re6stnet
+            server. The prefix of the machine's re6stnet ip is included in the
+            certificate's subject common name.
+
+--key path
+            Path to the private key file generated by the re6st-conf tool.
+
+Options
+-------
+
+-h, --help  Display a summary help about the options
+
+@file
+            You can give to re6stnet a config file as a regular argument
+            (meaning before giving optional openvpn arguments)
+            The file should contain one option per line, possibly ommitting
+            the '--'. Only long option are allowed (i.e "v 3" will not work
+            while "verbose 3" will)
+            You can give a file ( with the @ prefix ) as an argument within a
+            file ( since it is an optioin, it must be alone on the line ).
+
+--ip address port proto
             Specify connection information to be advertised to other nodes.
             address MUST be a ipv4 address since as of now openvpn does not
             support ipv6 addresses.
             Proto should be either udp or tcp-client
 
-    -i, --interface interface
+-i, ``--interface`` `interface`
             Give one interface name for each use of the argument. The interface
             will be used to detect other nodes on the local network.
 
-    --peers-db-refresh duration
+--peers-db-refresh duration
             Duration in seconds of the peers DB refresh interval.
             Default : 3600  ( 1 hour )
 
-    -l, --log directory
+-l, ``--log`` `directory`
             Path to the directory used for log files. Will create one file
             for babel logging and one file for each openvpn server and client
             started.
             Default : /var/log
 
-    -s, --state directory
+-s, ``--state`` `directory`
             Path to the directory used for state files. State files include :
-            - peers.db : the peers db used to establish connection
+            - peers.db : the peers db used to establish connection ( created
+            if does not exists )
             - re6stnet.babeld.state : babeld state file ( created if does not
             exists, overriden if exists )
-              There must be a valid peers db file ( named peers.db ) in the
-              directory. A valid peers db file can be created with setup.py
             Default : /var/lib/re6stnet
 
-    -v, --verbose level
+-v, ``--verbose`` `level`
             Defines the verbose level, level should be an integer between 0
             and 3 ( including ). There is no precise convention for verbode
             level for now, except an increased number means more log messages.
@@ -38,13 +105,7 @@ OPTIONS : RES6NET
             arguments at the end of the command line
             Default : 0
 
-    --registry address
-           Complete public ( reachable from the internet ) address of the machine
-           running a registry. Will be used to get the pirvate address of the
-           registry and/or bootstrap peers
-           Examples : http://192.0.2.42:80, http://[2001:db8:42::1]:80
-
-    --hello duration
+--hello duration
             Set hello interval, in seconds, for both wired and wireless
             connections. Openvpn ping-exit option is set to 4 times the hello
             interval. Argument passed down to the babel daemon, equivalent
@@ -56,11 +117,11 @@ OPTIONS : RES6NET
             connection has been cut
             Default : 15
 
-    -w, --wireless
+-w, --wireless
             Consider all interfaces as being wireless interfaces. Argument
             directly passed down to the babeld daemon
 
-    --pp port proto
+--pp port proto
             Port and protocol used by the openvpn server(s). Start one openvpn
             server for each couple port/protocol specified.
             Additionally, if no external configuration is given in the command
@@ -69,7 +130,7 @@ OPTIONS : RES6NET
             Protocols should be either udp or tcp-server.
             Default : (1194, udp), (1194, tcp-server)
 
-    --tunnel-refresh duration
+--tunnel-refresh duration
             Interval in seconds between two tunnel refresh. Refreshing tunnels
             mean :
             - killing all dead tunnels ( detected via the ping-exit option
@@ -82,63 +143,28 @@ OPTIONS : RES6NET
             peers DB does not contain enough peers )
             Default : 300
 
-    --dh path
-            Path to the dh file to be used by the openvpn server
-            (for more information see the openvpn man page)
-
-    --ca path
-            Path to the certificate authority file delivered by the re6stnet
-            server. The prefix of the VPN network is included in the serial
-            number of the file.
-
-    --cert path
-            Path to the individual certificate file delivered by the re6stnet
-            server. The prefix of the machine is included in the certificate's
-            subject common name.
-
-    --connection-count number
+--connection-count number
             The maximum number of openvpn clients to start.
             Default : 20
 
-    --refresh-rate ratio
+--refresh-rate ratio
             The ratio of connection to kill each time we refresh tunnels.
             For more information see the --tunnel-refresh option
             ratio should be a float between 0 and 1 ( included )
             Default : 0.05
 
-    openvpn_args
+Openvpn-options
+---------------
+
+-- openvpn_args
             Additional arguments to be passed down to all openvpn processes
             can be given at the end of the command line.
             In that case, insert '--' to delimit re6stnet regular options
             from the additional openvpn arguments. The list of arguments will
             be passed down to ALL openvpn processes ( including servers )
-            exactly as they are given
-            One SHOULD give a --key argument with the key file delivered by the
-            re6stnet server
-
-    @file
-            You can give to re6stnet a config file as a regular argument
-            (meaning before giving optional openvpn arguments)
-            The file should contain one option per line, possibly ommitting
-            the '--'. Only long option are allowed (i.e "v 3" will not work
-            while "verbose 3" will)
-            You can give a file ( with the @ prefix ) as an argument within a
-            file
-
-
-If you are using a version of python < 2.7.3-2, then you should include this at
-the beggining of registry.py
-
---------------------------------------------------------------------------------
-# Fix for librpcxml to avoid doing reverse dns on each request
-# it was causing a 10s delay on each request when no reverse DNS was avalaible
-import BaseHTTPServer
-
-
-def not_insane_address_string(self):
-    host, port = self.client_address[:2]
-    return '%s (reverse DNS disabled)' % host  # used to call: socket.getfqdn(host)
+            exactly as they are given.
 
-BaseHTTPServer.BaseHTTPRequestHandler.address_string = not_insane_address_string
+SEE ALSO
+========
 
---------------------------------------------------------------------------------
+``re6st-conf``\ (1), ``re6st-registry``\ (1), ``babeld``\ (8), ``openvpn``\ (8)

re6st-registry

@@ -59,7 +59,7 @@ class main(object):
         _('--bootstrap', action="append",
                 help='''VPN prefix of the peers to send as bootstrap peer,
                         instead of random ones''')
-        _('--private',
+        _('--private', required=True,
                 help='VPN IP of the node on which runs the registry')
         self.config = parser.parse_args()