Skip to content

L
lx2160a_build
Commit 423861ac authored by Rabeeh Khoury's avatar Rabeeh Khoury
Browse files
Options

Update release to may-29 release and misc changes 

1. Poweroff the HoneyComb board by asserting SUS_S5# signal
2. Add USB3.0 DWC3 workaround by disabling parkmode
3. Keep flexspi divisor as default which is ~17MHz. This enables using
the carrier board SPI that is limited in speed due to the analogue mux
connected to it.
4. Remove uefi build and update LSDK20.04 to may-29 update. UEFI is
temporarily hosted at https://github.com/SolidRun/lx2160a_uefi until
fully upstreamed.
5. Add 4x25Gbps MC config
Signed-off-by: default avatarRabeeh Khoury <rabeeh@solid-run.com>
parent 67b73cd2
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 927 additions and 29 deletions
patches/atf/0003-lx2160acex7-assert-SUS_S5-GPIO-to-poweroff-the-COM.patch 0 → 100644
View file @ 423861ac
From c9828291218cd363f099ea90f09cc66cf13f86ba Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Thu, 3 Sep 2020 14:08:44 +0300
Subject: [PATCH 3/3] lx2160acex7: assert SUS_S5# GPIO to poweroff the COM
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
plat/nxp/soc-lx2160/aarch64/lx2160.S | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/plat/nxp/soc-lx2160/aarch64/lx2160.S b/plat/nxp/soc-lx2160/aarch64/lx2160.S
index 7b2b67b..83f5889 100644
--- a/plat/nxp/soc-lx2160/aarch64/lx2160.S
+++ b/plat/nxp/soc-lx2160/aarch64/lx2160.S
@@ -668,6 +668,10 @@ _soc_sys_off:
* spurious timeout reset request
* workaround: MASK RESET REQ RPTOE
*/
+ mov x3, #NXP_GPIO3_ADDR
+ mov w1, #0x01000000
+ str w1, [x3]
+
ldr x0, =NXP_RESET_ADDR
ldr w1, =RSTRQMR_RPTOE_MASK
str w1, [x0, #RST_RSTRQMR1_OFFSET]
--
2.17.1
patches/linux-LSDK-20.04/7ba6b09fda5e0cb741ee56f3264665e0edc64822.patch 0 → 100644
View file @ 423861ac
commit 7ba6b09fda5e0cb741ee56f3264665e0edc64822
Author: Neil Armstrong <narmstrong@baylibre.com>
Date: Fri Feb 21 10:15:31 2020 +0100
usb: dwc3: core: add support for disabling SS instances in park mode
In certain circumstances, the XHCI SuperSpeed instance in park mode
can fail to recover, thus on Amlogic G12A/G12B/SM1 SoCs when there is high
load on the single XHCI SuperSpeed instance, the controller can crash like:
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
xhci-hcd xhci-hcd.0.auto: Host halt failed, -110
xhci-hcd xhci-hcd.0.auto: xHCI host controller not responding, assume dead
xhci-hcd xhci-hcd.0.auto: xHCI host not responding to stop endpoint command.
hub 2-1.1:1.0: hub_ext_port_status failed (err = -22)
xhci-hcd xhci-hcd.0.auto: HC died; cleaning up
usb 2-1.1-port1: cannot reset (err = -22)
Setting the PARKMODE_DISABLE_SS bit in the DWC3_USB3_GUCTL1 mitigates
the issue. The bit is described as :
"When this bit is set to '1' all SS bus instances in park mode are disabled"
Synopsys explains:
The GUCTL1.PARKMODE_DISABLE_SS is only available in
dwc_usb3 controller running in host mode.
This should not be set for other IPs.
This can be disabled by default based on IP, but I recommend to have a
property to enable this feature for devices that need this.
CC: Dongjin Kim <tobetter@gmail.com>
Cc: Jianxin Pan <jianxin.pan@amlogic.com>
Cc: Thinh Nguyen <thinhn@synopsys.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Reported-by: Tim <elatllat@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1d85c42b9c67..43bd5b1ea9e2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1029,6 +1029,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
if (dwc->dis_tx_ipgap_linecheck_quirk)
reg |= DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS;
+ if (dwc->parkmode_disable_ss_quirk)
+ reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS;
+
dwc3_writel(dwc->regs, DWC3_GUCTL1, reg);
}
@@ -1342,6 +1345,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
"snps,dis-del-phy-power-chg-quirk");
dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev,
"snps,dis-tx-ipgap-linecheck-quirk");
+ dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev,
+ "snps,parkmode-disable-ss-quirk");
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 77c4a9abe365..3ecc69c5b150 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -249,6 +249,7 @@
#define DWC3_GUCTL_HSTINAUTORETRY BIT(14)
/* Global User Control 1 Register */
+#define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17)
#define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28)
#define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24)
@@ -1024,6 +1025,8 @@ struct dwc3_scratchpad_array {
* change quirk.
* @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate
* check during HS transmit.
+ * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed
+ * instances in park mode.
* @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
* @tx_de_emphasis: Tx de-emphasis value
* 0 - -6dB de-emphasis
@@ -1215,6 +1218,7 @@ struct dwc3 {
unsigned dis_u2_freeclk_exists_quirk:1;
unsigned dis_del_phy_power_chg_quirk:1;
unsigned dis_tx_ipgap_linecheck_quirk:1;
+ unsigned parkmode_disable_ss_quirk:1;
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
patches/mc-utils/0002-Add-CEX7-4x25Gbps-support.patch 0 → 100644
View file @ 423861ac
This diff is collapsed.
patches/rcw-LSDK-20.04/0010-lx2160acex7-remove-flexspi-divisor-optimization.patch 0 → 100644
View file @ 423861ac
From 4f1f779e2d0757ab1d328761c06dc09b9c6a3544 Mon Sep 17 00:00:00 2001
From: Rabeeh Khoury <rabeeh@solid-run.com>
Date: Tue, 1 Sep 2020 12:39:31 +0300
Subject: [PATCH 10/10] lx2160acex7: remove flexspi divisor optimization
Keep the flexspi divisor as default; which is 17MHz when the fabric at
700MHz.
The HoneyComb / ClearFog CX carrier boards holds an SPI flash that it's
MUX is limited to 20MHz.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
---
lx2160acex7/configs/lx2160a_1900_600_2600.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2000_700_2400.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2000_700_2600.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2000_700_2900.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2000_700_3200.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2400_700_3200.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2500_700_3200.rcwi | 3 ---
lx2160acex7/configs/lx2160a_2600_700_3200.rcwi | 3 ---
lx2160acex7/configs/lx2160a_defaults.rcwi | 10 ++++++++--
lx2160acex7/configs/lx2160a_xspiboot.rcwi | 3 ---
10 files changed, 8 insertions(+), 29 deletions(-)
diff --git a/lx2160acex7/configs/lx2160a_1900_600_2600.rcwi b/lx2160acex7/configs/lx2160a_1900_600_2600.rcwi
index 8b61021..a3b7b29 100644
--- a/lx2160acex7/configs/lx2160a_1900_600_2600.rcwi
+++ b/lx2160acex7/configs/lx2160a_1900_600_2600.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=12
MEM_PLL_RAT=26
MEM2_PLL_RAT=26
-
-/* Modify FlexSPI Clock Divisor value */
-/* #include <../lx2160asi/flexspi_divisor_24.rcw>*/
diff --git a/lx2160acex7/configs/lx2160a_2000_700_2400.rcwi b/lx2160acex7/configs/lx2160a_2000_700_2400.rcwi
index 6b0b150..4cb3abf 100644
--- a/lx2160acex7/configs/lx2160a_2000_700_2400.rcwi
+++ b/lx2160acex7/configs/lx2160a_2000_700_2400.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=24
MEM2_PLL_RAT=24
-
-/* Modify FlexSPI Clock Divisor value */
-/* #include <../lx2160asi/flexspi_divisor_28.rcw>*/
diff --git a/lx2160acex7/configs/lx2160a_2000_700_2600.rcwi b/lx2160acex7/configs/lx2160a_2000_700_2600.rcwi
index 21dce67..a5c436c 100644
--- a/lx2160acex7/configs/lx2160a_2000_700_2600.rcwi
+++ b/lx2160acex7/configs/lx2160a_2000_700_2600.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=26
MEM2_PLL_RAT=26
-
-/* Modify FlexSPI Clock Divisor value */
-/* #include <../lx2160asi/flexspi_divisor_28.rcw>*/
diff --git a/lx2160acex7/configs/lx2160a_2000_700_2900.rcwi b/lx2160acex7/configs/lx2160a_2000_700_2900.rcwi
index e6a8e30..d1db3fb 100644
--- a/lx2160acex7/configs/lx2160a_2000_700_2900.rcwi
+++ b/lx2160acex7/configs/lx2160a_2000_700_2900.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=29
MEM2_PLL_RAT=29
-
-/* Modify FlexSPI Clock Divisor value */
-/* #include <../lx2160asi/flexspi_divisor_28.rcw>*/
diff --git a/lx2160acex7/configs/lx2160a_2000_700_3200.rcwi b/lx2160acex7/configs/lx2160a_2000_700_3200.rcwi
index 27ee377..22fcadf 100644
--- a/lx2160acex7/configs/lx2160a_2000_700_3200.rcwi
+++ b/lx2160acex7/configs/lx2160a_2000_700_3200.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=32
MEM2_PLL_RAT=32
-
-/* Modify FlexSPI Clock Divisor value */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
diff --git a/lx2160acex7/configs/lx2160a_2400_700_3200.rcwi b/lx2160acex7/configs/lx2160a_2400_700_3200.rcwi
index fc0fd6c..8f74ff0 100644
--- a/lx2160acex7/configs/lx2160a_2400_700_3200.rcwi
+++ b/lx2160acex7/configs/lx2160a_2400_700_3200.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=32
MEM2_PLL_RAT=32
-
-/* Modify FlexSPI Clock Divisor value */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
diff --git a/lx2160acex7/configs/lx2160a_2500_700_3200.rcwi b/lx2160acex7/configs/lx2160a_2500_700_3200.rcwi
index 62d9069..2dc1460 100644
--- a/lx2160acex7/configs/lx2160a_2500_700_3200.rcwi
+++ b/lx2160acex7/configs/lx2160a_2500_700_3200.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=32
MEM2_PLL_RAT=32
-
-/* Modify FlexSPI Clock Divisor value */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
diff --git a/lx2160acex7/configs/lx2160a_2600_700_3200.rcwi b/lx2160acex7/configs/lx2160a_2600_700_3200.rcwi
index e244917..d9fd795 100644
--- a/lx2160acex7/configs/lx2160a_2600_700_3200.rcwi
+++ b/lx2160acex7/configs/lx2160a_2600_700_3200.rcwi
@@ -7,6 +7,3 @@ SYS_PLL_RAT=14
MEM_PLL_RAT=32
MEM2_PLL_RAT=32
-
-/* Modify FlexSPI Clock Divisor value */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
diff --git a/lx2160acex7/configs/lx2160a_defaults.rcwi b/lx2160acex7/configs/lx2160a_defaults.rcwi
index 7997d49..359e86c 100644
--- a/lx2160acex7/configs/lx2160a_defaults.rcwi
+++ b/lx2160acex7/configs/lx2160a_defaults.rcwi
@@ -45,5 +45,11 @@ write 0x2320000,0x20000000
/* common PBI commands */
#include <../lx2160asi/common.rcw>
-/* Modify FlexSPI Clock Divisor value - for now keep it fixed value but using loadc/jumpc/jump it can be calculated on the fly */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
+/*
+ * Do not modify the FlexSPI clock divisor value when using HoneyComb / ClearFog CX
+ * as carrier boards. The reason is that the analog mux used on the carrier board
+ * can't accomodate more than 20MHz SPI frequency. So keep the value default 0x14
+ * which indicates divide by 80. In 700MHz fabric clock this is around 17MHz SPI
+ * clock.
+ */
+/*#include <../lx2160asi/flexspi_divisor_28.rcw>*/
diff --git a/lx2160acex7/configs/lx2160a_xspiboot.rcwi b/lx2160acex7/configs/lx2160a_xspiboot.rcwi
index fa092c9..21782ec 100644
--- a/lx2160acex7/configs/lx2160a_xspiboot.rcwi
+++ b/lx2160acex7/configs/lx2160a_xspiboot.rcwi
@@ -6,6 +6,3 @@
/* common PBI commands */
#include <../lx2160asi/common.rcw>
-
-/* Modify FlexSPI Clock Divisor value */
-#include <../lx2160asi/flexspi_divisor_28.rcw>
--
2.17.1
runme.sh
View file @ 423861ac
#!/bin/bash #!/bin/bash
set -e set -e
# BOOT_LOADER=u-boot,uefi
# DDR_SPEED=2400,2600,2900,3200
# SERDES=8_5_2, 13_5_2, 20_5_2
############################################################################### ###############################################################################
# General configurations # General configurations
############################################################################### ###############################################################################
#RELEASE=lx2160a-early-access-bsp0.7 # Supports both rev1 and rev2
#RELEASE=LSDK-19.09 # LSDK-19.09 supports rev1 only
BUILDROOT_VERSION=2020.02.1 BUILDROOT_VERSION=2020.02.1
#UEFI_RELEASE=DEBUG
#BOOT_LOADER=uefi
#DDR_SPEED=3200 #DDR_SPEED=3200
#SERDES=8_5_2 # 8x10g #SERDES=8_5_2 # 8x10g
#SERDES=13_5_2 # dual 100g #SERDES=13_5_2 # dual 100g
...@@ -21,10 +13,10 @@ BUILDROOT_VERSION=2020.02.1 ...@@ -21,10 +13,10 @@ BUILDROOT_VERSION=2020.02.1
# Misc # Misc
############################################################################### ###############################################################################
RELEASE=${RELEASE:-LSDK-20.04} RELEASE=${RELEASE:-LSDK-20.04}
BOOT_LOADER=${BOOT_LOADER:-u-boot}
DDR_SPEED=${DDR_SPEED:-3200} DDR_SPEED=${DDR_SPEED:-3200}
SERDES=${SERDES:-8_5_2} SERDES=${SERDES:-8_5_2}
UEFI_RELEASE=${UEFI_RELEASE:-RELEASE} UEFI_RELEASE=${UEFI_RELEASE:-RELEASE}
SHALLOW=${SHALLOW:false}
mkdir -p build images mkdir -p build images
ROOTDIR=`pwd` ROOTDIR=`pwd`
...@@ -45,6 +37,10 @@ case "${SERDES}" in ...@@ -45,6 +37,10 @@ case "${SERDES}" in
DPC=dpc-dual-100g.dtb DPC=dpc-dual-100g.dtb
DPL=dpl-eth.dual-100g.19.dtb DPL=dpl-eth.dual-100g.19.dtb
;; ;;
17_*)
DPC=dpc-quad-25g.dtb
DPL=dpl-eth.quad-25g.19.dtb
;;
20_*) 20_*)
DPC=dpc-dual-40g.dtb DPC=dpc-dual-40g.dtb
DPL=dpl-eth.dual-40g.19.dtb DPL=dpl-eth.dual-40g.19.dtb
...@@ -81,8 +77,6 @@ if [[ ! -d $ROOTDIR/build/toolchain ]]; then ...@@ -81,8 +77,6 @@ if [[ ! -d $ROOTDIR/build/toolchain ]]; then
cd $ROOTDIR/build/toolchain cd $ROOTDIR/build/toolchain
wget https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz wget https://releases.linaro.org/components/toolchain/binaries/7.4-2019.02/aarch64-linux-gnu/gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz
tar -xvf gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz tar -xvf gcc-linaro-7.4.1-2019.02-x86_64_aarch64-linux-gnu.tar.xz
wget https://releases.linaro.org/components/toolchain/binaries/4.9-2016.02/aarch64-linux-gnu/gcc-linaro-4.9-2016.02-x86_64_aarch64-linux-gnu.tar.xz
tar -xvf gcc-linaro-4.9-2016.02-x86_64_aarch64-linux-gnu.tar.xz
fi fi
echo "Building boot loader" echo "Building boot loader"
...@@ -96,21 +90,28 @@ for i in $QORIQ_COMPONENTS; do ...@@ -96,21 +90,28 @@ for i in $QORIQ_COMPONENTS; do
if [[ ! -d $ROOTDIR/build/$i ]]; then if [[ ! -d $ROOTDIR/build/$i ]]; then
echo "Cloing https://source.codeaurora.org/external/qoriq/qoriq-components/$i release $RELEASE" echo "Cloing https://source.codeaurora.org/external/qoriq/qoriq-components/$i release $RELEASE"
cd $ROOTDIR/build cd $ROOTDIR/build
git clone https://source.codeaurora.org/external/qoriq/qoriq-components/$i CHECKOUT=$RELEASE
cd $i if [ "x$i" == "xu-boot" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then
if [ "x$i" == "xlinux" ] && [ "x$RELEASE" == "xLSDK-19.06" ]; then CHECKOUT=LSDK-20.04-update-290520
git checkout -b LSDK-19.06-V4.19 refs/tags/LSDK-19.06-V4.19 fi
elif [ "x$i" == "xlinux" ] && [ "x$RELEASE" == "xLSDK-19.09" ]; then if [ "x$i" == "xlinux" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then
git checkout -b LSDK-19.09-V4.19 CHECKOUT=LSDK-20.04-V5.4-update-290520
elif [ "x$i" == "xlinux" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then fi
git checkout -b LSDK-20.04-V5.4 refs/tags/LSDK-20.04-V5.4 if [ "x$i" == "xatf" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then
elif [ "x$i" == "xdpdk" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then CHECKOUT=LSDK-20.04-update-290520
git checkout -b LSDK-19.09 fi
elif [ "x$i" == "xrestool" ] && [ "x$RELEASE" == "xLSDK-19.06" ]; then if [ "x$i" == "xrcw" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then
git checkout -b LSDK-19.09-update-291119 CHECKOUT=LSDK-20.04-update-290520
fi
if [ "x$i" == "xdpdk" ] && [ "x$RELEASE" == "xLSDK-20.04" ]; then
CHECKOUT=LSDK-19.09
fi
if [ "x$SHALLOW" == "xtrue" ]; then
git clone --depth=1 https://source.codeaurora.org/external/qoriq/qoriq-components/$i -b $CHECKOUT
else else
git checkout -b $RELEASE refs/tags/$RELEASE git clone https://source.codeaurora.org/external/qoriq/qoriq-components/$i -b $CHECKOUT
fi fi
cd $i
if [ "x$i" == "xatf" ]; then if [ "x$i" == "xatf" ]; then
cd $ROOTDIR/build/atf/tools/fiptool cd $ROOTDIR/build/atf/tools/fiptool
git clone https://github.com/NXP/ddr-phy-binary.git git clone https://github.com/NXP/ddr-phy-binary.git
...@@ -131,6 +132,13 @@ for i in $QORIQ_COMPONENTS; do ...@@ -131,6 +132,13 @@ for i in $QORIQ_COMPONENTS; do
if [[ -d $ROOTDIR/patches/$i-$RELEASE/ ]]; then if [[ -d $ROOTDIR/patches/$i-$RELEASE/ ]]; then
git am $ROOTDIR/patches/$i-$RELEASE/*.patch git am $ROOTDIR/patches/$i-$RELEASE/*.patch
fi fi
if [[ $RELEASE == *"-update"* ]]; then
# Check extract the LSDK name up to the '-update-...'
SUB_RELEASE=`echo $RELEASE | cut -f-2 -d'-'`
if [[ -d $ROOTDIR/patches/$i-$RELEASE/ ]]; then
git am $ROOTDIR/patches/$i-$RELEASE/*.patch
fi
fi
fi fi
done done
...@@ -440,11 +448,6 @@ dd if=$ROOTDIR/build/mc-utils/config/lx2160a/CEX7/${DPL} of=images/${IMG} bs=512 ...@@ -440,11 +448,6 @@ dd if=$ROOTDIR/build/mc-utils/config/lx2160a/CEX7/${DPL} of=images/${IMG} bs=512
# DPAA2 DPC at 0x7000 # DPAA2 DPC at 0x7000
dd if=$ROOTDIR/build/mc-utils/config/lx2160a/CEX7/${DPC} of=images/${IMG} bs=512 seek=28672 conv=notrunc dd if=$ROOTDIR/build/mc-utils/config/lx2160a/CEX7/${DPC} of=images/${IMG} bs=512 seek=28672 conv=notrunc
# Device tree (UEFI) at 0x7800
if [ "x${BOOT_LOADER}" == "xuefi" ]; then
dd if=$ROOTDIR/build/uefi/Build/LX2160aCex7Pkg/${UEFI_RELEASE}_GCC49/AARCH64/Platform/NXP/LX2160aCex7Pkg/DeviceTree/DeviceTree/OUTPUT/fsl-lx2160a-cex7.dtb of=images/${IMG} bs=512 seek=30720 conv=notrunc
dd if=$ROOTDIR/build/uefi/Build/LX2160aCex7Pkg/${UEFI_RELEASE}_GCC49/FV/LX2160ACEX7NV_EFI.fd of=images/${IMG} bs=512 seek=10240 conv=notrunc
fi
# Kernel at 0x8000 # Kernel at 0x8000
dd if=$ROOTDIR/build/linux/kernel-lx2160acex7.itb of=images/${IMG} bs=512 seek=32768 conv=notrunc dd if=$ROOTDIR/build/linux/kernel-lx2160acex7.itb of=images/${IMG} bs=512 seek=32768 conv=notrunc
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7