Until now it was disabled which means that if Component A imports Component B
and the latter is not in {validated,modified} state, Component A could be
validated without raising any error and failed at execution time.

As this relies on Pylint transform/hook and avoiding monkey patch as much
as possible, make Products.ERP5Type.patches.pylint available for Python3 (not
actually tested with ERP5 but no AttributeError nor ImportError with Python3
with this code).

Also, allow developer to call validate action from 'modified' state to handle
import use case:
  1. Edit A which raises an error stating that B.
  2. Fix B and validate it.
  3. Validate again A without requiring a modification of {reference,version,text_content}.

ZODB Components: Source code was checked even when setting text_content_{error,warning}_message_list properties.

So only check source code and validate when _set{TextContent,Reference,Version}
are called and remove wildcards.

Because this is using SQLDict, when we had multiple conversion
activities for the same path with different conversion parameters, only
one was executed.

We don't want this here, as the recent failures on
testDmsWithPreConversion.TestDocumentWithPreConversion are showing, when
the same image is referenced with different conversion parameters we
want to pre-convert for all conversion parameters.

Use SQLQueue, which allows calling the same method more than once.

/reviewed-on nexedi/erp5!971

Sometimes validator.erp5.net replies with error code 502 and this cause
ERP5 tests to fail. While this is a bit like ignoring problems, problems
with validator.erp5.net should not impact ERP5 tests results.

/reviewed-on nexedi/erp5!968

This is a fixup for commit 1519d81a.

There was a typo.

This test was using a blind `pause` instead of an explicit waitFor*, so
it was failing when machine was not fast enough.

Also refactor the test a bit to simplify the assertion by first
selecting the iframe we are going to inspect and make the test
compatible with both chrome and firefox - they behave differently when
interpreting new lines in selenium test tables.

/reviewed-on nexedi/erp5!967

We want to have FAILED test results before PASSED, to easily see the
failed tests.

Apparently this was a local change on nexedi ERP5 for some time but the
change got lost in last update. Let's commit it to make this
permanent.

/reviewed-on nexedi/erp5!960

test_04c_startTestSuiteOrderWithManyTestNodes is using same test results
names ("test suite 1", "test suite 2", ...) as some previous tests (
test_04b_startTestSuiteOrder ) so it's safer to start the test by
cancelling all previous test runs and renaming them.

/reviewed-on !959

erp5_trade_ja: New bt5 for wkhtmltopdf printout for 'Sale Invoice' with >2019/10/01 new Japanese VAT ratio support.

Based on the following ODT Templates (erp5_invoicing):
  * Invoice_viewAsODT.oot.
  * Invoice_viewAsODTStyles_l10n_ja.oot.

wkhtmltopdf template is based on work from slapos_accounting bt5:
  * SaleInvoiceTransaction_viewSlapOSPrintout.zpt.
  * SaleInvoiceTransaction_getSlapOSPrintout.css.zpt.

Conversion Server code is no longer bound to OOo, as emphasized by:
  * Renaming of Preference Properties ooodoc_server* to document_conversion_server*.
  * Conversion Server exceptions are already defined in Document.py.
  * Conversion Server also handles video/audio/... conversions.

Thus, refactor the code to connect to Conversion Server by moving it from
Products.ERP5OOo.Document to Products.ERP5.Document.Document (while keeping
backward compatibility):
  * Renamed:
    + OOoServerProxy => DocumentConversionServerProxy
    + OOO_SERVER_PROXY_TIMEOUT => DOCUMENT_CONVERSION_SERVER_PROXY_TIMEOUT
    + OOO_SERVER_RETRY => DOCUMENT_CONVERSION_SERVER_RETRY
  * Moved:
    + enc
    + dec
    + global_server_proxy_uri_failure_time

Also, Introduced erp5.module.TransformLib (in erp5_core as currently all Transforms
are there even though it should probably not be so) to define DocumentConversionServerTransform
and which will hold libtransforms content when this will be moved to ZODB Components.

Note: Ideally, OOOdCommandTransform should inherit from DocumentConversionServerTransform
but wkhtmltopdf Handler on Cloudooo side is a hack only implemented in Manager.convertFile()
whereas OOOdCommandTransform still uses legacy Manager.run_generate(), so leave it as it is
to avoid breaking things (this will be addressed in a separate MR).

/reviewed-on nexedi/erp5!955

/reviewed-on !965

ZODB Components: Add 'Origin' (source_reference) field showing from which FS module it was imported.

* pylint may return a false positive error which have to be disabled and
  failing to import it because of that requires to edit on the FS and try
  again so it is not practical for a whole Product. Instead it is easier
  to import it and not validate
* Validation was done only for 'Test Component' and 'Extension Component',
  but all imported Components had their consistency and source code checked
  and this is not consistent to not validate but do these checks.
* importFromFilesystem() was checking consistency and source code, and this
  was done again when validating.

So leave the imported ZODB Components as draft and let the developer fixes
issues upon validation before committing.

ZODB Components: List of migratable 'Module Components' in Products.XXX.* should include any kind of objects and not only modules.

This fixes Products.ERP5VCS.Git module not being displayed because
Products.ERP5VCS.__init__ only imports one of its class and not the whole
module (and the module was not imported anywhere else too) so it was not in
Products.ERP5VCS.__dict__.

useStdin=False => temporary file was not created.
useStdin=True  => temporary file was created.

When multiple repositories exists and two of them contain scalability_test package be wiser and really check if neeeded Test Suite class exists before trying to load it.

When running tests the path to git command is just git, because we have
set $PATH

updateConfiguration is a method to set the list of partitions, not to
add partitions to an existing computer. The previous (slapos.core
<1.5.0) implementation of slap proxy was incorrect and was adding more
partitions each time it was called, but that was never the indented
behavior.

Prepare the list of partitions and call updateConfiguration only once to
set all partitions.

This should fix SLAPOS-SR-TEST that are still using erp5.util

Some tests where patching SlapOSControler to replace methods by a no-op,
but this was never reset. I believe we should rewrite this using mock
which takes care of un-doing the patches for us and makes this testing
easier, but for now I'm just reseting the missing methods like all
others were already reseted.

configparser read options as strings, node_quantity is not supposed to
be an int.

pkg_resources.resource_string reads the file as binary, if we want to
substitute in this string we need to decode it.

ZODB Components: Monkey patch pylint to avoid 'No config file found, using default configuration' on stderr.

Another solution could have been to have a configuration file for pylint instead
of command line arguments but it depends on the type of Component (for example
'Interface Component' has specific arguments).

Value of text_content is an unicode string whose (inside XML) encoding is utf-8. This inconsistency raises in xml library thus it is safer to convert back to utf-8 which is the intended encoding anyway.

After upgrading bt5s, portal_sms may still ERP5BaseBroken until restarting Zope.

ZODB Components: Allow migration of {Interface,Mixin,Module,Tool} from Business Template UI and on all Products (not only Products.ERP5).

This introduces the following new ZODB Components:
  + Module Component: Non-Documents/non-persistent classes of modules usually
    found at the top-level of Products (eg Products.ERP5.XXX) on FS. Considering
    that all other Components types are actually Modules, make it the base class.
  + Tool Component: Tool directory of Products on FS (eg Products.ERP5.Tool.XXX).
    => DiffTool and CallableTool are now 'Tool Component' instead of plain
       'Document Component' and properly registered as Tools like FS Products Tool.

Skip CMFActivity and HBTreeFolder2 Products for now in migration View for now as
almost many Portal Type classes have ActiveObject or HBTreeFolder2 in their MRO
and these Products will be done at the end anyway...