- 22 Nov, 2017 1 commit
-
-
Julien Muchembled authored
-
- 21 Nov, 2017 1 commit
-
-
Sebastien Robin authored
Issue was: - user project_user was created - project_user create stored routines - mysql data is dumped (including list of users) - mysql data is restored, but stored routines have the information DEFINER that must match an existing user. This does not work if there is no flush privileges instructions So make sure to insert flush privileges while dumping
-
- 20 Nov, 2017 1 commit
-
-
Julien Muchembled authored
This reproduces what happens on a Prod system, where TokuDB turned out to use much more CPU than FileStorage.
-
- 17 Nov, 2017 2 commits
-
-
Rafael Monnerat authored
If the person wants to use slapos master, it makes no sense provide diferent options
-
Yusei Tahara authored
-
- 15 Nov, 2017 2 commits
-
-
Julien Muchembled authored
-
Julien Muchembled authored
There's little hope that it gets maintained because it contains a C extension whereas alternatives often use ctypes. In particular, it has no support for Python 3, and this is a blocker for us. At the beginning, [I though we were switching to pyinotify](0bb405fc): it is quite popular, and even used by fail2ban, but the code is ugly (big, crazy API, limited, and probably slow). I didn't really know inotify and it's disappointing to see that created files (CREATE+WRITE+CLOSE_WRITE) can't be distinguished from hard links (CREATE). Acting upon new inodes is a common scenario and in the first case, you want to wait CLOSE_WRITE or you would read a partially written file. What I mean is that inotify is often unreliable, unless you detect changes done by your own software (e.g. you can make sure that files aren't hard-linked) but then some other IPC is probably simpler. In any case, I open this MR because I haven't tested it. I only checked with pylint (hence the second commit). /cc @alain.takoudjou @gabriel @luke (from Git history) /reviewed-on !257
-
- 14 Nov, 2017 9 commits
-
-
Julien Muchembled authored
-
Julien Muchembled authored
inotifyx does not support Python 3.
-
Jérome Perrin authored
It was reverted in commit 9c672830 but it is still required to bootstrap from old SlapOS setups.
-
Romain Courteaud authored
-
Romain Courteaud authored
Replace dropbear by openssh. Use same rdiff-backup than provided by PBS. Allow to directly use an IPV6 address with a custom port.
-
Romain Courteaud authored
-
Romain Courteaud authored
-
Julien Muchembled authored
-
Yusei Tahara authored
-
- 13 Nov, 2017 3 commits
-
-
Eteri authored
Add binding to a specific ip. Add error log. @rafael @gabriel /reviewed-on nexedi/slapos!256
-
Jérome Perrin authored
Solve the problem that `slapos` script is missing from slaprunner ( described in !253 ) by adding `slapos.core` egg explicitly. /reviewed-on nexedi/slapos!254
-
Yusei Tahara authored
-
- 10 Nov, 2017 4 commits
-
-
Julien Muchembled authored
-
Julien Muchembled authored
-
Julien Muchembled authored
-
Jérome Perrin authored
Thanks to nexedi/slapos!158 , in a slaprunner we can use slapos command: ``` $ slapos supply https://lab.nexedi.com/nexedi/slapos/raw/1.0.19/software/erp5/software.cfg slaprunner ``` works fine to supply a software to "current" webrunner, but building this software with `slapos node software` fails with: ``` $ slapos node software 2017-10-03 02:46:33 slapos[29536] CRITICAL slapgrid could not write pidfile /opt/slapos/slapgrid-sr.pid 2017-10-03 02:46:33 slapos[29536] ERROR [Errno 13] Permission denied: '/opt/slapos/slapgrid-sr.pid' Traceback (most recent call last): File "/opt/slapgrid/f496eadc03f1ac5a0ab1e4ae60bbe972/eggs/slapos.core-1.4.1-py2.7.egg/slapos/cli/entry.py", line 300, in run_subcommand result = cmd.run(parsed_args) File "/opt/slapgrid/f496eadc03f1ac5a0ab1e4ae60bbe972/eggs/slapos.core-1.4.1-py2.7.egg/slapos/cli/command.py", line 50, in run return self.take_action(parsed_args) File "/opt/slapgrid/f496eadc03f1ac5a0ab1e4ae60bbe972/eggs/slapos.core-1.4.1-py2.7.egg/slapos/cli/slapgrid.py", line 116, in take_action setRunning(logger=self.app.log, pidfile=pidfile) File "/opt/slapgrid/f496eadc03f1ac5a0ab1e4ae60bbe972/eggs/slapos.core-1.4.1-py2.7.egg/slapos/grid/utils.py", line 155, in setRunning write_pid(logger, pidfile) File "/opt/slapgrid/f496eadc03f1ac5a0ab1e4ae60bbe972/eggs/slapos.core-1.4.1-py2.7.egg/slapos/grid/utils.py", line 167, in write_pid with open(pidfile, 'w') as fout: IOError: [Errno 13] Permission denied: '/opt/slapos/slapgrid-sr.pid' ``` because slaprunner's web interface also runs software, it's better both `slapos node software` command and the one from slaprunner web interface uses the same pid file so that they do not run in parallel. This depends on nexedi/slapos.core!29 /reviewed-on nexedi/slapos!235
-
- 09 Nov, 2017 3 commits
-
-
Julien Muchembled authored
-
Julien Muchembled authored
-
Julien Muchembled authored
-
- 08 Nov, 2017 2 commits
-
-
Rafael Monnerat authored
-
Łukasz Nowak authored
Since using apache-2.4[1] the Include directive will fail if no glob matches, this switch to new, IncludeOptional[2], available since 2.4, in order to not fail if no configurations are present. [1] 1f7bf3d1 [2] http://httpd.apache.org/docs/2.4/mod/core.html#includeoptional /reviewed-on nexedi/slapos!252
-
- 07 Nov, 2017 9 commits
-
-
Julien Muchembled authored
Recent versions of OpenSSL refuse to load Romain's key: unable to load certificate 140268475908992:error:0D0E20DE:asn1 encoding routines:c2i_ibuf:illegal zero content:../crypto/asn1/a_int.c:154: 140268475908992:error:0D08303A:asn1 encoding routines:asn1_template_noexp_d2i:nested asn1 error:../crypto/asn1/tasn_dec.c:609:Field=serialNumber, Type=X509_CINF 140268475908992:error:0D08303A:asn1 encoding routines:asn1_template_noexp_d2i:nested asn1 error:../crypto/asn1/tasn_dec.c:609:Field=cert_info, Type=X509 140268475908992:error:0906700D:PEM routines:PEM_ASN1_read_bio:ASN1 lib:../crypto/pem/pem_oth.c:33: With older versions: Certificate: Data: Version: 1 (0x0) Serial Number: 0 (0x0) ... Acked-by:
Romain Courteaud <romain@nexedi.com>
-
Cédric Le Ninivin authored
-
Kazuhiko Shiozaki authored
-
Eteri authored
-
Eteri authored
-
Eteri authored
-
Eteri authored
-
Eteri authored
-
eteri authored
-
- 06 Nov, 2017 1 commit
-
-
Julien Muchembled authored
-
- 05 Nov, 2017 2 commits
-
-
Julien Muchembled authored
On some machines, net:TestDialTimeout never passes and today, Go 1.4 is only used for bootstrapping, so let's not be more clever than Go devs, who explicitly state to use make.bash See also https://github.com/golang/go/issues/18954
-
Kazuhiko Shiozaki authored
-