Commit 7b294cdd authored by Michael Anthony Knyszek's avatar Michael Anthony Knyszek Committed by Michael Knyszek

runtime: don't hold worldsema across mark phase

This change makes it so that worldsema isn't held across the mark phase.
This means that various operations like ReadMemStats may now stop the
world during the mark phase, reducing latency on such operations.

Only three such operations are still no longer allowed to occur during
marking: GOMAXPROCS, StartTrace, and StopTrace.

For the former it's because any change to GOMAXPROCS impacts GC mark
background worker scheduling and the details there are tricky.

For the latter two it's because tracing needs to observe consistent GC
start and GC end events, and if StartTrace or StopTrace may stop the
world during marking, then it's possible for it to see a GC end event
without a start or GC start event without an end, respectively.

To ensure that GOMAXPROCS and StartTrace/StopTrace cannot proceed until
marking is complete, the runtime now holds a new semaphore, gcsema,
across the mark phase just like it used to with worldsema.

Fixes #19812.

Change-Id: I15d43ed184f711b3d104e8f267fb86e335f86bf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/182657
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarKeith Randall <khr@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
parent 033299fa
......@@ -26,12 +26,12 @@ func GOMAXPROCS(n int) int {
return ret
}
stopTheWorld("GOMAXPROCS")
stopTheWorldGC("GOMAXPROCS")
// newprocs will be processed by startTheWorld
newprocs = int32(n)
startTheWorld()
startTheWorldGC()
return ret
}
......
......@@ -1248,6 +1248,7 @@ func gcStart(trigger gcTrigger) {
}
// Ok, we're doing it! Stop everybody else
semacquire(&gcsema)
semacquire(&worldsema)
if trace.enabled {
......@@ -1353,6 +1354,7 @@ func gcStart(trigger gcTrigger) {
Gosched()
}
semrelease(&worldsema)
semrelease(&work.startSema)
}
......@@ -1415,6 +1417,10 @@ top:
return
}
// forEachP needs worldsema to execute, and we'll need it to
// stop the world later, so acquire worldsema now.
semacquire(&worldsema)
// Flush all local buffers and collect flushedWork flags.
gcMarkDoneFlushed = 0
systemstack(func() {
......@@ -1475,6 +1481,7 @@ top:
// work to do. Keep going. It's possible the
// transition condition became true again during the
// ragged barrier, so re-check it.
semrelease(&worldsema)
goto top
}
......@@ -1551,6 +1558,7 @@ top:
now := startTheWorldWithSema(true)
work.pauseNS += now - work.pauseStart
})
semrelease(&worldsema)
goto top
}
}
......@@ -1761,6 +1769,7 @@ func gcMarkTermination(nextTriggerRatio float64) {
}
semrelease(&worldsema)
semrelease(&gcsema)
// Careful: another GC cycle may start now.
releasem(mp)
......
......@@ -962,8 +962,23 @@ func restartg(gp *g) {
// goroutines.
func stopTheWorld(reason string) {
semacquire(&worldsema)
getg().m.preemptoff = reason
systemstack(stopTheWorldWithSema)
gp := getg()
gp.m.preemptoff = reason
systemstack(func() {
// Mark the goroutine which called stopTheWorld preemptible so its
// stack may be scanned.
// This lets a mark worker scan us while we try to stop the world
// since otherwise we could get in a mutual preemption deadlock.
// We must not modify anything on the G stack because a stack shrink
// may occur. A stack shrink is otherwise OK though because in order
// to return from this function (and to leave the system stack) we
// must have preempted all goroutines, including any attempting
// to scan our stack, in which case, any stack shrinking will
// have already completed by the time we exit.
casgstatus(gp, _Grunning, _Gwaiting)
stopTheWorldWithSema()
casgstatus(gp, _Gwaiting, _Grunning)
})
}
// startTheWorld undoes the effects of stopTheWorld.
......@@ -975,10 +990,31 @@ func startTheWorld() {
getg().m.preemptoff = ""
}
// Holding worldsema grants an M the right to try to stop the world
// and prevents gomaxprocs from changing concurrently.
// stopTheWorldGC has the same effect as stopTheWorld, but blocks
// until the GC is not running. It also blocks a GC from starting
// until startTheWorldGC is called.
func stopTheWorldGC(reason string) {
semacquire(&gcsema)
stopTheWorld(reason)
}
// startTheWorldGC undoes the effects of stopTheWorldGC.
func startTheWorldGC() {
startTheWorld()
semrelease(&gcsema)
}
// Holding worldsema grants an M the right to try to stop the world.
var worldsema uint32 = 1
// Holding gcsema grants the M the right to block a GC, and blocks
// until the current GC is done. In particular, it prevents gomaxprocs
// from changing concurrently.
//
// TODO(mknyszek): Once gomaxprocs and the execution tracer can handle
// being changed/enabled during a GC, remove this.
var gcsema uint32 = 1
// stopTheWorldWithSema is the core implementation of stopTheWorld.
// The caller is responsible for acquiring worldsema and disabling
// preemption first and then should stopTheWorldWithSema on the system
......
......@@ -180,9 +180,12 @@ func traceBufPtrOf(b *traceBuf) traceBufPtr {
// Most clients should use the runtime/trace package or the testing package's
// -test.trace flag instead of calling StartTrace directly.
func StartTrace() error {
// Stop the world, so that we can take a consistent snapshot
// Stop the world so that we can take a consistent snapshot
// of all goroutines at the beginning of the trace.
stopTheWorld("start tracing")
// Do not stop the world during GC so we ensure we always see
// a consistent view of GC-related events (e.g. a start is always
// paired with an end).
stopTheWorldGC("start tracing")
// We are in stop-the-world, but syscalls can finish and write to trace concurrently.
// Exitsyscall could check trace.enabled long before and then suddenly wake up
......@@ -193,7 +196,7 @@ func StartTrace() error {
if trace.enabled || trace.shutdown {
unlock(&trace.bufLock)
startTheWorld()
startTheWorldGC()
return errorString("tracing is already enabled")
}
......@@ -264,7 +267,7 @@ func StartTrace() error {
unlock(&trace.bufLock)
startTheWorld()
startTheWorldGC()
return nil
}
......@@ -273,14 +276,14 @@ func StartTrace() error {
func StopTrace() {
// Stop the world so that we can collect the trace buffers from all p's below,
// and also to avoid races with traceEvent.
stopTheWorld("stop tracing")
stopTheWorldGC("stop tracing")
// See the comment in StartTrace.
lock(&trace.bufLock)
if !trace.enabled {
unlock(&trace.bufLock)
startTheWorld()
startTheWorldGC()
return
}
......@@ -317,7 +320,7 @@ func StopTrace() {
trace.shutdown = true
unlock(&trace.bufLock)
startTheWorld()
startTheWorldGC()
// The world is started but we've set trace.shutdown, so new tracing can't start.
// Wait for the trace reader to flush pending buffers and stop.
......
......@@ -233,6 +233,7 @@ func TestTraceSymbolize(t *testing.T) {
}},
{trace.EvGomaxprocs, []frame{
{"runtime.startTheWorld", 0}, // this is when the current gomaxprocs is logged.
{"runtime.startTheWorldGC", 0},
{"runtime.GOMAXPROCS", 0},
{"runtime/trace_test.TestTraceSymbolize", 0},
{"testing.tRunner", 0},
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment