Skip to content

G
go
Switch branch/tag
  1. 27 Nov, 2019 5 commits
  3. 26 Nov, 2019 4 commits
  5. 25 Nov, 2019 8 commits
  7. 24 Nov, 2019 1 commit
  9. 23 Nov, 2019 4 commits
  11. 22 Nov, 2019 15 commits
    • Dmitri Shuralyov's avatar
      net/http: rename tests for Redirect and StripPrefix · 6ba1bf39
      Dmitri Shuralyov authored 
      Before May 2018, I mistakenly thought the _suffix naming convention¹
used by examples also applied to tests. Thanks to a code review comment²
from Ian Lance Taylor, I have since learned that is not true.
This trivial change fixes some collateral damage from my earlier
misunderstanding, resulting in improved test naming consistency.

¹ https://golang.org/pkg/testing/#hdr-Examples
² https://go-review.googlesource.com/c/go/+/112935/1/src/path/filepath/path_test.go#1075

Change-Id: I555f60719629eb64bf2f096aa3dd5e00851827cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/207446
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarEmmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
      6ba1bf39
    • Brad Fitzpatrick's avatar
      net/http: make Transport.IdleConnTimeout consider wall (not monotonic) time · 980f0c00
      Brad Fitzpatrick authored 
      Both laptops closing their lids and cloud container runtimes
suspending VMs both faced the problem where an idle HTTP connection
used by the Transport could be cached for later reuse before the
machine is frozen, only to wake up many minutes later to think that
their HTTP connection was still good (because only a second or two of
monotonic time passed), only to find out that the peer hung up on them
when they went to write.

HTTP/1 connection reuse is inherently racy like this, but no need for
us to step into a trap if we can avoid it. Also, not everybody sets
Request.GetBody to enable re-tryable POSTs. And we can only safely
retry requests in some cases.

So with this CL, before reusing an old connection, double check the walltime.

Testing was done both with a laptop (closing the lid for a bit) and
with QEMU, running "stop" and "cont" commands in the monitor and
sending QMP guest agent commands to update its wall clock after the
"cont":

echo '{"execute":"guest-set-time"}' | socat STDIN UNIX-CONNECT:/var/run/qemu-server/108.qga

In both cases, I was running
https://gist.github.com/bradfitz/260851776f08e4bc4dacedd82afa7aea and
watching that the RemoteAddr changed after resume.

It's kinda difficult to write an automated test for. I gave a lightning talk on
using pure emulation user mode qemu for such tests:

   https://www.youtube.com/watch?v=69Zy77O-BUM
   https://docs.google.com/presentation/d/1rAAyOTCsB8GLbMgI0CAbn69r6EVWL8j3DPl4qc0sSlc/edit?usp=sharing
   https://github.com/google/embiggen-disk/blob/master/integration_test.go

... that would probably be a good direction if we want an automated
test here. But I don't have time to do that now.

Updates #29308 (HTTP/2 remains)

Change-Id: I03997e00491f861629d67a0292da000bd94ed5ca
Reviewed-on: https://go-review.googlesource.com/c/go/+/204797Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      980f0c00
    • Bryan C. Mills's avatar
      cmd/go/internal/work: reduce code duplication in buildModeInit by using sys.BuildModeSupported · 9f3c2b6d
      Bryan C. Mills authored 
      Updates #34347

Change-Id: I6ea02d4737999bf24f5335508b5ed2352b498122
Reviewed-on: https://go-review.googlesource.com/c/go/+/208458
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarJay Conrod <jayconrod@google.com>
      9f3c2b6d
    • Jay Conrod's avatar
      cmd/go: fix and re-enable build_trimpath test · 8324acad
      Jay Conrod authored 
      The test was comparing a binary built from a list of files to a test
build from a named package. That should not (and did not) work. The
test now compares two binaries built the same way in different
directories.

Also add a portion of the test for GOPATH and fix the gccgo portion of
the test (verified manually).

Fixes #35435

Change-Id: I2535a0011c9d97d2274e5550ae277302dbb91e6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/208234
Run-TryBot: Jay Conrod <jayconrod@google.com>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      8324acad
    • Bryan C. Mills's avatar
      cmd/go: do not panic when computing Shlib for a package with no Target · 941ac9ce
      Bryan C. Mills authored 
      In module mode, a non-main package lacks an install target.

The location of the .shlib corresponding to a given target is stored
in a .shlibname file alongside its install target, so in module mode
a non-main package also lacks a .shlibname file.

This also implies that such a package cannot be installed with
'go install -buildmode=linkshared', but that is a problem
for another day.

Fixes #35759
Updates #34347

Change-Id: Id3e0e068266d5fb9b061a59e70f9a65985d4973b
Reviewed-on: https://go-review.googlesource.com/c/go/+/208233
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarJay Conrod <jayconrod@google.com>
      941ac9ce
    • Bryan C. Mills's avatar
      cmd/go: add a 'buildmode' condition for script tests · 28314cf1
      Bryan C. Mills authored 
      In CL 208233 I am fixing a panic that occurs only with a specific
build mode. I want that test to run on all platforms that support that
build mode, but the logic for determining support is somewhat
involved.

For now, I am duplicating that logic into the cmd/internal/sys
package, which already reports platform support for other build flags.

We can refactor cmd/go/internal/work to use the extracted function in
a followup CL.

Updates #35759

Change-Id: Ibbaedde4d1e8f683c650beedd10849bc27e7a6e7
Reviewed-on: https://go-review.googlesource.com/c/go/+/208457
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarJay Conrod <jayconrod@google.com>
      28314cf1
    • Bryan C. Mills's avatar
      misc/cgo/testshared: make -v output less verbose · c931f1b6
      Bryan C. Mills authored 
      Previously, 'go test -v' in this directory would result in a massive
dump of go command output, because the test plumbed -v to 'build -x'.
This change separates them into distinct flags, so that '-v' only
implies the display of default 'go' command output.

Updates #30316

Change-Id: Ifb125f35ec6a0bebe7e8286e7c546d132fb213df
Reviewed-on: https://go-review.googlesource.com/c/go/+/208232
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      c931f1b6
    • Michael Anthony Knyszek's avatar
      runtime: release worldsema before Gosched in STW GC mode · 05511a5c
      Michael Anthony Knyszek authored 
      After CL 182657 we no longer hold worldsema across the GC, we hold
gcsema instead.

However in STW GC mode we don't release worldsema before calling Gosched
on the user goroutine (note that user goroutines are disabled during STW
GC) so that user goroutine holds onto it. When the GC is done and the
runtime inevitably wants to "stop the world" again (though there isn't
much to stop) it'll sit there waiting for worldsema which won't be
released until the aforementioned goroutine is scheduled, which it won't
be until the GC is done!

So, we have a deadlock.

The fix is easy: just release worldsema before calling Gosched.

Fixes #34736.

Change-Id: Ia50db22ebed3176114e7e60a7edaf82f8535c1b4
Reviewed-on: https://go-review.googlesource.com/c/go/+/208379
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
      05511a5c
    • Michael Anthony Knyszek's avatar
      runtime: increase TestPhysicalMemoryUtilization threshold · 1c5bd345
      Michael Anthony Knyszek authored 
      TestPhysicalMemoryUtilization occasionally fails on some platforms by
only a small margin. The reason for this is that it assumes the
scavenger will always be able to scavenge all the memory that's released
by sweeping, but because of the page cache, there could be free and
unscavenged memory held onto by a P which the scavenger simply cannot
get to.

As a result, if the page cache gets filled completely (512 KiB of free
and unscavenged memory) this could skew a test which expects to
scavenge roughly 8 MiB of memory. More specifically, this is 512 KiB of
memory per P, and if a system is more inclined to bounce around
between Ps (even if there's only one goroutine), this memory can get
"stuck".

Through some experimentation, I found that failures correlated highly
with relatively large amounts of memory ending up in some page cache
(like 60 or 64 pages) on at least one P.

This change changes the test's threshold such that it accounts for the
page cache, and scales up with GOMAXPROCS. Because the test constants
themselves don't change, however, the test must now also bound
GOMAXPROCS such that the threshold doesn't get too high (at which point
the test becomes meaningless).

Fixes #35580.

Change-Id: I6bdb70706de991966a9d28347da830be4a19d3a1
Reviewed-on: https://go-review.googlesource.com/c/go/+/208377
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarKeith Randall <khr@golang.org>
      1c5bd345
    • Jay Conrod's avatar
      cmd/go: add 'go generate' commands to modfile_flag test · 300f5d5b
      Jay Conrod authored 
      Verify that 'go generate' works with -modfile. Also check that
go commands starts with 'go generate' do not inherit -modfile, but
they should still work if -modfile is set in GOFLAGS.

Updates #34506

Change-Id: I5e1f897b4e38e4fdaccc0fbb7a71b8d0e9fc0660
Reviewed-on: https://go-review.googlesource.com/c/go/+/208236
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      300f5d5b
    • Bryan C. Mills's avatar
      misc/cgo/testcshared: avoid writing to GOROOT in tests · 3922c006
      Bryan C. Mills authored 
      The tests in this package invoked 'go install -i -buildmode=c-shared'
in order to generate an archive as well as multiple C header files.

Unfortunately, the behavior of the '-i' flag is inappropriately broad
for this use-case: it not only generates the library and header files
(as desired), but also attempts to install a number of (unnecessary)
archive files for transitive dependencies to
GOROOT/pkg/$GOOS_$GOARCH_testcshared_shared, which may not be writable
— for example, if GOROOT is owned by the root user but the test is
being run by a non-root user.

Instead, for now we generate the header files for transitive dependencies
separately by running 'go tool cgo -exportheader'.

In the future, we should consider how to improve the ergonomics for
generating transitive header files without coupling that to
unnecessary library installation.

Updates #28387
Updates #30316
Updates #35715

Change-Id: I622426a860828020d98f7040636f374e5c766d28
Reviewed-on: https://go-review.googlesource.com/c/go/+/208119
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      3922c006
    • Bryan C. Mills's avatar
      misc/cgo/testcarchive: avoid writing to GOROOT in tests · c02f3b86
      Bryan C. Mills authored 
      Also add a -testwork flag to facilitate debugging the test itself.

Three of the tests of this package invoked 'go install -i
-buildmode=c-archive' in order to generate an archive as well as
multiple C header files.

Unfortunately, the behavior of the '-i' flag is inappropriately broad
for this use-case: it not only generates the library and header files
(as desired), but also attempts to install a number of (unnecessary)
archive files for transitive dependencies to
GOROOT/pkg/$GOOS_$GOARCH_shared, which may not be writable — for
example, if GOROOT is owned by the root user but the test is being run
by a non-root user.

Instead, for now we generate the header files for transitive dependencies
separately by running 'go tool cgo -exportheader'.

In the future, we should consider how to improve the ergonomics for
generating transitive header files without coupling that to
unnecessary library installation.

Updates #28387
Updates #30316
Updates #35715

Change-Id: I3d483f84e22058561efe740aa4885fc3f26137b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/208117
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      c02f3b86
    • Hana Kim's avatar
      runtime/pprof: avoid crash due to truncated stack traces · ea18a1c2
      Hana Kim authored 
      The profile proto message builder maintains a location entry cache
that maps a location (possibly involving multiple user frames
that represent inlined function calls) to the location id. We have
been using the first pc of the inlined call sequence as the key of
the cached location entry assuming that, for a given pc, the sequence
of frames representing the inlined call stack is deterministic and
stable. Then, when analyzing the new stack trace, we expected the
exact number of pcs to be present in the captured stack trace upon
the cache hit.

This assumption does not hold, however, in the presence of the stack
trace truncation in the runtime during profiling, and also with the
potential bugs in runtime.

A better fix is to use all the pcs of the inlined call sequece as
the key instead of the first pc. But that is a bigger code change.
This CL avoids the crash assuming the trace was truncated.

Fixes #35538

Change-Id: I8c6bae98bc8b178ee51523c7316f56b1cce6df16
Reviewed-on: https://go-review.googlesource.com/c/go/+/207609
Run-TryBot: Hyang-Ah Hana Kim <hyangah@gmail.com>
Reviewed-by: default avatarKeith Randall <khr@golang.org>
      ea18a1c2
    • two's avatar
      reflect: remove obsolete comment about gobitVector · 95be9b75
      two authored 
      Change-Id: Ie3495a51ac2021a55e7c1ee43a66d07a5bf2757a
GitHub-Last-Rev: b6a6bab3ab840b361021b25cac37eb6891c0fe4b
GitHub-Pull-Request: golang/go#35709
Reviewed-on: https://go-review.googlesource.com/c/go/+/207853Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      95be9b75
    • David Chase's avatar
      cmd/compile: try harder to not use an empty src.XPos for a bogus line · 0e02cfb3
      David Chase authored 
      The fix for #35652 did not guarantee that it was using a non-empty
src position to replace an empty one.  The new code checks again
and falls back to a more certain position.  (The input in question
compiles to a single empty infinite loop, and none of the actual instructions
had any source position at all.  That is a bug, but given the pathology
of this input, not one worth dealing with this late in the release cycle,
if ever.)

Literally:

00000 (5) TEXT "".f(SB), ABIInternal
00001 (5) PCDATA $0, $-2
00002 (5) PCDATA $1, $-2
00003 (5) FUNCDATA $0, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
00004 (5) FUNCDATA $1, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
00005 (5) FUNCDATA $2, gclocals·33cdeccccebe80329f1fdbee7f5874cb(SB)
b2
00006 (?) XCHGL AX, AX
b6
00007 (+1048575) JMP 6
00008 (?) END

TODO: Add runtime.InfiniteLoop(), replace infinite loops with a call to
that, and use an eco-friendly runtime.gopark instead.  (This was Cherry's
excellent idea.)

Updates #35652
Fixes #35695

Change-Id: I4b9a841142ee4df0f6b10863cfa0721a7e13b437
Reviewed-on: https://go-review.googlesource.com/c/go/+/207964
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
      0e02cfb3
  13. 21 Nov, 2019 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7