Go is being proposed as an officially supported language for elements of
OpenStack:

  https://review.openstack.org/#/c/312267/

As such, repos that exist in OpenStack's git infrastructure
are likely to become places from which people might want to go get
things. Allow optional .git suffixes to allow writing code that depends
on git.openstack.org repos that will work with older go versions while
we wait for this support to roll out.

Change-Id: Ia64bdb1dafea33b1c3770803230d30ec1059df22
Reviewed-on: https://go-review.googlesource.com/23135Reviewed-by: Russ Cox <rsc@golang.org>

sparseSet and sparseMap only need 32 bit integers in their
arrays, since a sparseEntry key is also limited to 32 bits.
This appears to reduce the space allocated for at least
one pathological compilation by 1%, perhaps more.

Not necessarily for 1.7, but it saves a little and is very
low-risk.

Change-Id: Icf1185859e9f5fe1261a206b441e02c34f7d02fd
Reviewed-on: https://go-review.googlesource.com/22972
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

On some systems, gdb is set to: "startup-with-shell on". This
breaks runtime_test. This just make sure gdb does not start by
spawning a shell.

Fixes #15354

Change-Id: Ia040931c61dea22f4fdd79665ab9f84835ecaa70
Reviewed-on: https://go-review.googlesource.com/23142Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Previously statements like

    f(unsafe.Pointer(g()), int(h()))

would be reordered into a sequence of statements like

    autotmp_g := g()
    autotmp_h := h()
    f(unsafe.Pointer(autotmp_g), int(autotmp_h))

which can leave g's temporary value on the stack as a uintptr, rather
than an unsafe.Pointer. Instead, recognize uintptr-to-unsafe.Pointer
conversions when reordering function calls to instead produce:

    autotmp_g := unsafe.Pointer(g())
    autotmp_h := h()
    f(autotmp_g, int(autotmp_h))

Fixes #15329.

Change-Id: I2cdbd89d233d0d5c94791513a9fd5fd958d11ed5
Reviewed-on: https://go-review.googlesource.com/22273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #14656.

Change-Id: I37a9aa51705ae18bd034f2cc6dbf06a55f969197
Reviewed-on: https://go-review.googlesource.com/23202Reviewed-by: Rob Pike <r@golang.org>

Change-Id: I7881e3353dc5cd9755a79ea0eab146c6a0a08306
Reviewed-on: https://go-review.googlesource.com/23195
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Looks like some version of Android still fails with "servname not
supported for ai_socktype". It probably doesn't support
ai_socktype=SOCK_STREAM.

Updates #14576.

Change-Id: I77ecff147d5b759e3281b3798c60f150a4aab811
Reviewed-on: https://go-review.googlesource.com/23194Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #14793

Change-Id: I408056d096cd6a999fa5e349704b5ea8e26d2e4e
Reviewed-on: https://go-review.googlesource.com/23201Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The signal might get delivered to a different thread, and that thread
might not run again before the currently running thread returns and
exits. Sleep to give the other thread time to pick up the signal and
crash.

Not tested for all cases, but, optimistically:
Fixes #14063.

Change-Id: Iff58669ac6185ad91cce85e0e86f17497a3659fd
Reviewed-on: https://go-review.googlesource.com/23203
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>

Update the doc for CreateCertificateRequest
to state that it creates a
  `new certificate request`
instead of just a
  `new certificate`

Fixes #14649.

Change-Id: Ibbbcf91d74168998990990e78e5272a6cf294d51
Reviewed-on: https://go-review.googlesource.com/23204Reviewed-by: Russ Cox <rsc@golang.org>

Verify that for a server doing chunked encoding, with the final data
and EOF arriving together, the client will reuse the connection even
if it closes the body without seeing an EOF. The server sends at least
one non-zero chunk and one zero chunk. This verifies that the client's
bufio reading reads ahead and notes the EOF, so even if the JSON
decoder doesn't read the EOF itself, as long as somebody sees it, a
close won't forcible tear down the connection. This was true at least
of https://golang.org/cl/21291

No code change. Test already passed (even with lots of runs, including
in race mode with randomized goroutine scheduling).

Updates #15703

Change-Id: I2140b3eec6b099b6b6e54f153fe271becac5d949
Reviewed-on: https://go-review.googlesource.com/23200
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>

racefini calls __tsan_fini which is C code and at the end of it
invoked the standard C library exit(3) call. This has undefined
behavior if invoked more than once. Specifically in C++ programs
it caused static destructors to run twice. At least on glibc
impls it also means the at_exit handlers list (where those are
stored) also free's a list entry when it completes these. So invoking
twice results in a double free at exit which trips debug memory
allocation tracking.

Fix all of this by using an atomic as a boolean barrier around
calls to racefini being invoked > 1 time.

Fixes #15578

Change-Id: I49222aa9b8ded77160931f46434c61a8379570fc
Reviewed-on: https://go-review.googlesource.com/22882Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #15675

Change-Id: I8bad220988e5d690f20804db970b2db037c81187
Reviewed-on: https://go-review.googlesource.com/23086Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #14576.

Change-Id: I760907c67c97cb827cf48ba7eb0bb2f4f8d4d790
Reviewed-on: https://go-review.googlesource.com/23111
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

The initial implementation of reflect.StructOf in
https://golang.org/cl/9251 had a limitation that field names had to be
ASCII, which was later lifted by https://golang.org/cl/21777.  Remove
the out-of-date documentation disallowing UTF-8 field names.

Updates: #5748
Updates: #15064

Change-Id: I2c5bfea46bfd682449c6e847fc972a1a131f51b7
Reviewed-on: https://go-review.googlesource.com/23170Reviewed-by: David Crawshaw <crawshaw@golang.org>

os.SIGINT is not defined, os.Interrupt or syscall.SIGINT should be used.

Change-Id: I39867726d28e179d1160a4fd353b7bea676c9dbb
Reviewed-on: https://go-review.googlesource.com/23127Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Also replaces google.com with golang.org in package documentation.

Updates #15228.

Change-Id: I554fa960878fa44557a522635ed412d8d7548d3f
Reviewed-on: https://go-review.googlesource.com/23126Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This change drops parseInterfaceTable which becomes unnecessary by the
golang.org/x/net/route plumbing.

Change-Id: I05f96e347de950bb1e9292bb3eeff01bb40e292f
Reviewed-on: https://go-review.googlesource.com/23125
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #15348

Change-Id: I9e0e1e3a26fa4cd697d2c613e6b4952188b7c7e1
Reviewed-on: https://go-review.googlesource.com/23150Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

before this change, when io.MultiReader was called many times but contain few
underlying readers, calls to Read were unnecessarily expensive.

Fixes #13558

Change-Id: I3ec4e88c7b50c075b148331fb1b7348a5840adbe
Reviewed-on: https://go-review.googlesource.com/17873Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Adds a transparent sort to the mime/multipart package, which is
only used in the CreatePart func. This will ensure the ordering
of the MIMEHeader.

The point of this change was to ensure the output would be consistent
and something that could be depended on.

Fixes #13522

Change-Id: I9584ef9dbe98ce97d536d897326914653f8d9ddf
Reviewed-on: https://go-review.googlesource.com/17497Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I7627e480d5d2366cba223fd81635c4115649f752
Reviewed-on: https://go-review.googlesource.com/23154Reviewed-by: Ian Lance Taylor <iant@golang.org>

Issue #15613 points out that the darwin builders have been getting
regular failures in which a process that should exit with a SIGPIPE
signal is instead exiting with exit status 2. The code calls
runtime.raise. On most systems runtime.raise is the equivalent of
pthread_kill(gettid(), sig); that is, it kills the thread with the
signal, which should ensure that the program does not keep going. On
darwin, however, runtime.raise is actually kill(getpid(), sig); that is,
it sends a signal to the entire process. If the process decides to
deliver the signal to a different thread, then it is possible that in
some cases the thread that calls raise is able to execute the next
system call before the signal is actually delivered. That would cause
the observed error.

I have not been able to recreate the problem myself, so I don't know
whether this actually fixes it. But, optimistically:

Fixed #15613.

Change-Id: I60c0a9912aae2f46143ca1388fd85e9c3fa9df1f
Reviewed-on: https://go-review.googlesource.com/23152
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #15188

Change-Id: I0ab7791f7db499cef6bc52292d3d93ff4da7caff
Reviewed-on: https://go-review.googlesource.com/23151Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This adds a sparse method for locating nearest ancestors
in a dominator tree, and checks blocks with more than one
predecessor for differences and inserts phi functions where
there are.

Uses reversed post order to cut number of passes, running
it from first def to last use ("last use" for paramout and
mem is end-of-program; last use for a phi input from a
backedge is the source of the back edge)

Includes a cutover from old algorithm to new to avoid paying
large constant factor for small programs.  This keeps normal
builds running at about the same time, while not running
over-long on large machine-generated inputs.

Add "phase" flags for ssa/build -- ssa/build/stats prints
number of blocks, values (before and after linking references
and inserting phis, so expansion can be measured), and their
product; the product governs the cutover, where a good value
seems to be somewhere between 1 and 5 million.

Among the files compiled by make.bash, this is the shape of
the tail of the distribution for #blocks, #vars, and their
product:

	 #blocks	#vars	    product
 max	6171	28180	173,898,780
99.9%	1641	 6548	 10,401,878
  99%	 463	 1909	    873,721
  95%	 152	  639	     95,235
  90%	  84	  359	     30,021

The old algorithm is indeed usually fastest, for 99%ile
values of usually.

The fix to LookupVarOutgoing
( https://go-review.googlesource.com/#/c/22790/ )
deals with some of the same problems addressed by this CL,
but on at least one bug ( #15537 ) this change is still
a significant help.

With this CL:
/tmp/gopath$ rm -rf pkg bin
/tmp/gopath$ time go get -v -gcflags -memprofile=y.mprof \
   github.com/gogo/protobuf/test/theproto3/combos/...
...
real	4m35.200s
user	13m16.644s
sys	0m36.712s
and pprof reports 3.4GB allocated in one of the larger profiles

With tip:
/tmp/gopath$ rm -rf pkg bin
/tmp/gopath$ time go get -v -gcflags -memprofile=y.mprof \
   github.com/gogo/protobuf/test/theproto3/combos/...
...
real	10m36.569s
user	25m52.286s
sys	4m3.696s
and pprof reports 8.3GB allocated in the same larger profile

With this CL, most of the compilation time on the benchmarked
input is spent in register/stack allocation (cumulative 53%)
and in the sparse lookup algorithm itself (cumulative 20%).

Fixes #15537.

Change-Id: Ia0299dda6a291534d8b08e5f9883216ded677a00
Reviewed-on: https://go-review.googlesource.com/22342Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This should help with debugging failures.

For #15138 and #15477.

Change-Id: I77db2b6375d8b4403d3edf5527899d076291e02c
Reviewed-on: https://go-review.googlesource.com/23134
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rick Hudson <rlh@golang.org>

Fixes #15424

Change-Id: Ib9e97509f5ac239ee54fe6fe37152a7f5fc75087
Reviewed-on: https://go-review.googlesource.com/23109Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The convention for writing something like "64 kB" is 64<<10, since
this is easier to read than 1<<16. Update gcBitsChunkBytes to follow
this convention.

Change-Id: I5b5a3f726dcf482051ba5b1814db247ff3b8bb2f
Reviewed-on: https://go-review.googlesource.com/23132Reviewed-by: Rick Hudson <rlh@golang.org>

Change-Id: I5ebf93b60213c0138754fc20888ae5ce60237b8c
Reviewed-on: https://go-review.googlesource.com/23131Reviewed-by: Rick Hudson <rlh@golang.org>

Make clear negotiation can happen via NPN or ALPN, similar to
http.Transport.TLSNextProto and x/net/http2.NextProtoTLS.

Change-Id: Ied00b842bc04e11159d6d2107beda921cefbc6ca
Reviewed-on: https://go-review.googlesource.com/23108Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

If client does not provided User-Agent header, do not set default one
used by net/http package when doing request to backend.

Fixes #15524

Change-Id: I9a46bb3b7ec106bc7c3071e235b872d279994d67
Reviewed-on: https://go-review.googlesource.com/23089
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #13372.

Change-Id: Id2402a781474e9d0bb0901c5844adbd899f76cbd
Reviewed-on: https://go-review.googlesource.com/23123
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #14982.

Change-Id: Id12b1e61456832d2b2ffbdbe8cf0a1db4444b1e4
Reviewed-on: https://go-review.googlesource.com/23122Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Also removes unnecessary test cases for avoiding unexpected failures on
newer operating systems.

Updates #14724.

Change-Id: I2291585d951fb70383da68293a6ac1ff3524c7f7
Reviewed-on: https://go-review.googlesource.com/22452
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

There was a typo introduced in the initial
implementation of the Plan 9 support of
the mime package.

On Plan 9, the mime type file name should be
/sys/lib/mimetype instead of /sys/lib/mimetypes.

Change-Id: If0f0a9b6f3fbfa8dde551f790e83bdd05e8f0acb
Reviewed-on: https://go-review.googlesource.com/23087
Run-TryBot: Minux Ma <minux@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This change makes use of new routing message APIs for BSD variants to
support FreeBSD 11 and newer versions of other BSDs.

Fixes #7849.
Fixes #14724.

Change-Id: I56c7886d6622cdeddd7cc29c8a8062dcc06216d5
Reviewed-on: https://go-review.googlesource.com/22451Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The 17-31 byte code is broken.  Disabled it.

Added a bunch of tests to at least cover the cases
in indexShortStr.  I'll channel Brad and wonder why
this CL ever got in without any tests.

Fixes #15679

Change-Id: I84a7b283a74107db865b9586c955dcf5f2d60161
Reviewed-on: https://go-review.googlesource.com/23106Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

golang.org/x/net/route becomes vendor/golang.org/x/net/route.

At git rev 30be488 (golang.org/cl/22446)

Updates #14724.

Change-Id: I41cfb5443aeecac4c71e843c09eb8c1d4b7413ea
Reviewed-on: https://go-review.googlesource.com/22450Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Local.String() returns "Local" on every OS, but windows.
Change windows code to do like others.

Updates #15568

Change-Id: I7a4d2713d940e2a01cff9d7f5cefc89def07546a
Reviewed-on: https://go-review.googlesource.com/23078Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The resource is available over (and redirects to) HTTPS, it seems like a good
idea to save a redirect and ensure an encrypted connection.

Change-Id: I262c7616ae289cdd756b6f67573ba6bd7e3e0ca6
Reviewed-on: https://go-review.googlesource.com/23104Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>