Fixes #13423.

Change-Id: I41bb45790cca36c57a107796f0eca61287acb2a9
Reviewed-on: https://go-review.googlesource.com/17332
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Move test for isblank into addmethod so that most of the type checking
for methods is also performed for blank methods.

Fixes #11366.

Change-Id: I13d554723bf96d906d0b3ff390d7b7c87c1a5020
Reviewed-on: https://go-review.googlesource.com/16866Reviewed-by: Robert Griesemer <gri@golang.org>

Long lived connections may make some DB operation difficult.
(e.g. retiring load balanced DB server.)
So SetConnMaxLifetime closes long lived connections.

It can be used to limit maximum idle time, too.
Closing idle connections reduces active connections while application is idle
and avoids connections are closed by server side (cause errBadConn while querying).

fixes #9851

Change-Id: I2e8e824219c1bee7f4b885d38ed96d11b7202b56
Reviewed-on: https://go-review.googlesource.com/6580
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

When the name of an Address contains non-ASCII characters,
Address.String() used mime.QEncoding to encode the name.

However certain characters are forbidden when an encoded-word is
in a phrase context (see RFC 2047 section 5.3) and these
characters are not encoded by mime.QEncoding.

In this case we now use mime.BEncoding (base64 encoding) so that
forbidden characters are also encoded.

Fixes #11292

Change-Id: I52db98b41ece439295e97d7e94c8190426f499c2
Reviewed-on: https://go-review.googlesource.com/16012Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The old code was assuming that a PT_NOTE segment never had more than one
note, but there is no such requirement.

Fixes #13364.

Change-Id: I3f6b3716130bf7af6abe81b8e10571a8c7cd943c
Reviewed-on: https://go-review.googlesource.com/17331
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Commit 7a1fb95d strips non-free license
from Mark.Twain-Tom.Sawyer.txt, but forgot to remove it from the compressed
version of the file.

Update #13216

Change-Id: I60f53275d56ba5baa6898db47b1d41f85e985c00
Reviewed-on: https://go-review.googlesource.com/17264Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Motivation for change:
* Recursive logic is hard to follow, since it tends to apply
things in reverse. On the other hand, the tar formats tend to
describe meta headers as affecting the next entry.
* Recursion also applies changes in the wrong order. Two test
files are attached that use multiple headers. The previous Go
behavior differs from what GNU and BSD tar do.

Change-Id: Ic1557256fc1363c5cb26570e5d0b9f65a9e57341
Reviewed-on: https://go-review.googlesource.com/14624
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This mirrors the same behavior and API from the server code to the
client side: if TLSNextProto is nil, HTTP/2 is on by default for
both. If it's non-nil, the user was trying to do something fancy and
step out of their way.

Updates #6891

Change-Id: Ia31808b71f336a8d5b44b985591d72113429e1d4
Reviewed-on: https://go-review.googlesource.com/17300Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The existing code has partial support for -07 (just the hours of a time
zone offset).  Complete the support, add support for Z07, and add a few
tests.

Fixes #13426.

Change-Id: Ic6377bbf3e65b4bb761b9779f7e80c07ce4f57e8
Reviewed-on: https://go-review.googlesource.com/17260Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Motivations for this change:
* It allows these functions to be used outside of Reader/Writer.
* It allows these functions to be more easily unit tested.

Change-Id: Iebe2b70bdb8744371c9ffa87c24316cbbf025b59
Reviewed-on: https://go-review.googlesource.com/15113Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #12492

Change-Id: I8bb512027639301e2f2c41aab84e6d06ae88b137
Reviewed-on: https://go-review.googlesource.com/14312Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #13090

Change-Id: I5612d792dabdff89bd0cec57dc2cacf9be7ebf64
Reviewed-on: https://go-review.googlesource.com/16341
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #13011.

Change-Id: Ia4c67880fca83f4298ff6bb1b217ec26c8c83427
Reviewed-on: https://go-review.googlesource.com/17231Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

It's not a group: must handle the inside as a sequence of literal chars,
not a single literal string.

That is, \Qab\E+ is the same as ab+, not (ab)+.

Fixes #11187.

Change-Id: I5406d05ccf7efff3a7f15395bdb0cfb2bd23a8ed
Reviewed-on: https://go-review.googlesource.com/17233Reviewed-by: David Crawshaw <crawshaw@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I5be18b68602a7ebb740cf05924236ce17e386e55
Reviewed-on: https://go-review.googlesource.com/17295
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #13108.

Change-Id: I474cc2a3b7ced1c9eb978fc815f9c6bae9fb3ecc
Reviewed-on: https://go-review.googlesource.com/17235Reviewed-by: Ian Lance Taylor <iant@golang.org>

If we try to reuse a connection that the server is in the process of
closing, we may end up successfully writing out our request (or a
portion of our request) only to find a connection error when we try to
read from (or finish writing to) the socket. This manifests as an EOF
returned from the Transport's RoundTrip.

The issue, among others, is described in #4677.

This change follows some of the Chromium guidelines for retrying
idempotent requests only when the connection has been already been used
successfully and no header data has yet been received for the response.

As part of this change, an unexported error was defined for
errMissingHost, which was previously defined inline. errMissingHost is
the only non-network error returned from a Request's Write() method.

Additionally, this breaks TestLinuxSendfile because its test server
explicitly triggers the type of scenario this change is meant to retry
on. Because that test server stops accepting conns on the test listener
before the retry, the test would time out. To fix this, the test was
altered to use a non-idempotent test type (POST).

Change-Id: I1ca630b944f0ed7ec1d3d46056a50fb959481a16
Reviewed-on: https://go-review.googlesource.com/3210Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

The empty string is not a valid DER integer. DER also requires that values be
minimally-encoded, so excess padding with leading 0s (0xff for negative
numbers) is forbidden. (These rules also apply to BER, incidentally.)

Fixes #12622.

Change-Id: I041f94e34a8afa29dbf94dd8fc450944bc91c9c3
Reviewed-on: https://go-review.googlesource.com/17008Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Motivations:
* Use of strconv.ParseInt does not properly treat integers as 64bit,
preventing this function from working properly on 32bit machines.
* Use of io.ReadFull does not properly detect truncated streams
when the file suddenly ends on a block boundary.
* The function blindly trusts user input for numEntries and allocates
memory accordingly.
* The function does not validate that numEntries is not negative,
allowing a malicious sparse file to cause a panic during make.

In general, this function was overly complicated for what it was
accomplishing and it was hard to reason that it was free from
bounds errors. Instead, it has been rewritten and relies on
bytes.Buffer.ReadString to do the main work. So long as invariants
about the number of '\n' in the buffer are maintained, it is much
easier to see why this approach is correct.

Change-Id: Ibb12c4126c26e0ea460ea063cd17af68e3cf609e
Reviewed-on: https://go-review.googlesource.com/15174Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Certain special type-flags, specifically 1, 2, 3, 4, 5, 6,
do not have a data section. Thus, regardless of what the size field
says, we should not attempt to read any data for these special types.

The relevant PAX and USTAR specification says:
<<<
If the typeflag field is set to specify a file to be of type 1 (a link)
or 2 (a symbolic link), the size field shall be specified as zero.
If the typeflag field is set to specify a file of type 5 (directory),
the size field shall be interpreted as described under the definition
of that record type. No data logical records are stored for types 1, 2, or 5.
If the typeflag field is set to 3 (character special file),
4 (block special file), or 6 (FIFO), the meaning of the size field is
unspecified by this volume of POSIX.1-2008, and no data logical records shall
be stored on the medium.
Additionally, for type 6, the size field shall be ignored when reading.
If the typeflag field is set to any other value, the number of logical
records written following the header shall be (size+511)/512, ignoring
any fraction in the result of the division.
>>>

Contrary to the specification, we do not assert that the size field
is zero for type 1 and 2 since we liberally accept non-conforming formats.

Change-Id: I666b601597cb9d7a50caa081813d90ca9cfc52ed
Reviewed-on: https://go-review.googlesource.com/16614Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Or at least make them true.

Fixes #12237.

Change-Id: I3c92a07233b2174c5731d6fa7fbb9ca3a97beb6b
Reviewed-on: https://go-review.googlesource.com/17237Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Implement setting the compression level for a zip archive by registering
a per-Writer compressor through Writer.RegisterCompressor.  If no
compressors are registered, fall back to the ones registered at the
package level.  Also implements per-Reader decompressors.

Fixes #8359

Change-Id: I93b27c81947b0f817b42e0067aa610ff267fdb21
Reviewed-on: https://go-review.googlesource.com/16669Reviewed-by: Joe Tsai <joetsai@digital-static.net>
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
Reviewed-by: Klaus Post <klauspost@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Use sync.Once to ensure, that 'offsets' field is initialized
once only in a threadsafe way.

Fixes #12887

Change-Id: I90ef929c421ccd3094339c67a39b02d8f2e47211
Reviewed-on: https://go-review.googlesource.com/16013Reviewed-by: Robert Griesemer <gri@golang.org>

A Content-Type always has a slash (type/subtype)
A Content-Disposition does not (e.g. "attachment" or "line").
A "media type" is either one of those, plus optional parameters afterwards.

Our ParseMediaType and FormatMediaType weren't consistent in whether
they permitted Content-Dispositions. Now they both do.

Fixes #11289

Change-Id: Ia75723c9d7adb7f4de0f65482780f823cdadb5bd
Reviewed-on: https://go-review.googlesource.com/17135Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fix an old bug where media type parameter values could be escaped by
either double quotes (per the spec) or single quotes (due to my bug).

The original bug was introduced by me in git rev 90e4ece3
(https://golang.org/cl/4430049) in April 2011 when adding more tests
from http://greenbytes.de/tech/tc2231/ and misinterpreting the
expected value of test "attwithfntokensq" and not apparently thinking
about it enough.

No known spec or existing software produces or expects single quotes
around values. In fact, it would have be a parsing ambiguity if it
were allowed: the string `a=', b='` could parse as two keys "a" and
"b" both with value "'", or it could be parse as a single key "a" with
value "', b=".

Fixes #11291

Change-Id: I6de58009dd47dcabb120b017245d237cb7b1e89a
Reviewed-on: https://go-review.googlesource.com/17136Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Check that it now properly handles \xC0 and \xC1.

Fixes #11733.

Change-Id: I66cfe0d43f9d123d4c4509a3fa18b9b6380dfc39
Reviewed-on: https://go-review.googlesource.com/17225Reviewed-by: Russ Cox <rsc@golang.org>

The ppc64le shared library ABI demands that r12 is set to a function's global
entrypoint before jumping to the global entrypoint. Not doing so means that
handling signals that usually panic actually crashes (and so, e.g. can't be
recovered). Fixes several failures of "cd test; go run run.go -linkshared".

Change-Id: Ia4d0da4c13efda68340d38c045a52b37c2f90796
Reviewed-on: https://go-review.googlesource.com/17280Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #13420.

Change-Id: Id64ebd0527881450fdaffbb66d8b1831a6b7c43c
Reviewed-on: https://go-review.googlesource.com/17263Reviewed-by: Rob Pike <r@golang.org>

Old parser remains.

Change-Id: I05ef1737802e23afc2c2129f58cb66feef8e3425
Reviewed-on: https://go-review.googlesource.com/17244Reviewed-by: David Crawshaw <crawshaw@golang.org>

Fixes #13245.

Change-Id: I87be63cc7b27f70ca2f9fb6bc9908b9061fe3d9d
Reviewed-on: https://go-review.googlesource.com/17203Reviewed-by: Chris Manghane <cmang@golang.org>

Updates to x/net rev 195180cf
(golang.org/cl/17134, http2: merge duplicate Transport dials)

Change-Id: I50b9c73b30c6a21e725aad80126b713d8b0fa362
Reviewed-on: https://go-review.googlesource.com/17261Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes #13421.

Change-Id: Ic0fc0d0a8e86d2be23db12ddd1a8a8105e26ee56
Reviewed-on: https://go-review.googlesource.com/17250Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Burcu Dogan <jbd@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: Ica0cf1ba01ba73bd7e2fe38d653503738a962720
Reviewed-on: https://go-review.googlesource.com/13450Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: Id72cf4daceb7669cf9c7247df8e3ba086ccfe96e
Reviewed-on: https://go-review.googlesource.com/12730Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ibc55e98c43cebe5a21ab3b280489e1bce6405b8b
Reviewed-on: https://go-review.googlesource.com/17218Reviewed-by: Alex Brainman <alex.brainman@gmail.com>

This is the 386 version of the amd64-specific https://golang.org/cl/16933.

Update #12416.

Change-Id: Ibc3a99dcc753d6281839d8b61016d6c21dbd9649
Reviewed-on: https://go-review.googlesource.com/16970
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

This makes it more convenient for C code to use GoString with string
constants.  Since Go string values are immutable, the const qualifier is
appropriate in C.

Change-Id: I5fb3cdce2ce5079f1f0467a1544bb3a1eb27b811
Reviewed-on: https://go-review.googlesource.com/17067
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

The builtin name resolver using various resolution techniques is a bit
complicated and we sometimes fotget to take care of all the go and cgo
code paths and exchanging information to local and remote sources. This
change makes LookupAddr return absolute domain names even in the case of
local source.

Updates #12189.
Fixes #12240.

Change-Id: Icdd3375bcddc7f5d4d3b24f134d93815073736fc
Reviewed-on: https://go-review.googlesource.com/17216Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #13419.

Change-Id: I530d0b714ea0743c72eacd07b390c3f8cc556e21
Reviewed-on: https://go-review.googlesource.com/17239Reviewed-by: Robert Griesemer <gri@golang.org>

Follow-up cleanup for https://go-review.googlesource.com/17248:
Use properly typed local variable op now that that variable use
is not overloaded anymore.

Also: Remove unnecessary if stmt from common lexical path.

Change-Id: I984b0b346f3fdccd5aedc937330c0a5f99acf324
Reviewed-on: https://go-review.googlesource.com/17249Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>