a -> an

Change-Id: I7362bdc199e83073a712be657f5d9ba16df3077e
Reviewed-on: https://go-review.googlesource.com/63850Reviewed-by: Rob Pike <r@golang.org>

Previously, if CGO_ENABLED=0 was set when building
with -msan, the error message printed was:

  -race requires cgo; enable cgo by setting CGO_ENABLED=1

yet the instrumentation flag passed in was -msan. This CL
fixes that message to correctly report that -msan needed
CGO_ENABLED=1, and likewise if -race, report -race needed it.

Fixes #21895

Change-Id: If423d520daae7847fb38cc97c3192ada5d960f9d
Reviewed-on: https://go-review.googlesource.com/63930
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Add generic rules to propagate floating point constants through
comparisons and integer conversions. These new rules seldom trigger
in the standard library so there is no performance change, however
I think it is worth adding them anyway for completeness.

Change-Id: I9db5222746508a2996f1cafb72f4e0cf2541de07
Reviewed-on: https://go-review.googlesource.com/63795
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

The functions Float64bits and Float64frombits perform
poorly on ppc64x because the int<->float conversions
often result in load and store sequences to handle the
type change. This patch adds more rules to recognize
those sequences and use register to register moves
and avoid unnecessary loads and stores where possible.

There were some existing rules to improve these conversions,
but this provides additional improvements. Included here:

- New instruction FCFIDS to improve on conversion to 32 bit
- Rename Xf2i64 and Xi2f64 as MTVSRD, MFVSRD, to match the asm
- Add rules to lower some of the load/store sequences for
- Added new go asm to ppc64.s testcase.
conversions

Improvements:

BenchmarkAbs-16                2.16          0.93          -56.94%
BenchmarkCopysign-16           2.66          1.18          -55.64%
BenchmarkRound-16              4.82          2.69          -44.19%
BenchmarkSignbit-16            1.71          1.14          -33.33%
BenchmarkFrexp-16              11.4          7.94          -30.35%
BenchmarkLogb-16               10.4          7.34          -29.42%
BenchmarkLdexp-16              15.7          11.2          -28.66%
BenchmarkIlogb-16              10.2          7.32          -28.24%
BenchmarkPowInt-16             69.6          55.9          -19.68%
BenchmarkModf-16               10.1          8.19          -18.91%
BenchmarkLog2-16               17.4          14.3          -17.82%
BenchmarkCbrt-16               45.0          37.3          -17.11%
BenchmarkAtanh-16              57.6          48.3          -16.15%
BenchmarkRemainder-16          76.6          65.4          -14.62%
BenchmarkGamma-16              26.0          22.5          -13.46%
BenchmarkPowFrac-16            197           174           -11.68%
BenchmarkMod-16                112           99.8          -10.89%
BenchmarkAsinh-16              59.9          53.7          -10.35%
BenchmarkAcosh-16              44.8          40.3          -10.04%

Updates #21390

Change-Id: I56cc991fc2e55249d69518d4e1ba76cc23904e35
Reviewed-on: https://go-review.googlesource.com/63290Reviewed-by: Michael Munday <mike.munday@ibm.com>

Rework the test to work with any number of std packages. This was done
to include a few funcs from unicode/utf8. Adding more will be much
simpler too.

While at it, add more runtime funcs by searching for "inlined" or
"inlining" in the git log of its directory. These are: addb, subtractb,
fastrand and noescape.

Updates #21851.

Change-Id: I4fb2bd8aa6a5054218f9b36cb19d897ac533710e
Reviewed-on: https://go-review.googlesource.com/63611
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

If the Go packages with enough source files,it will cause EMFILE/ENFILE error,
Fix this by limiting the number of simultaneously opened files.

Fixes #21621

Change-Id: I8555d79242d2f90771e37e073b7540fc7194a64a
Reviewed-on: https://go-review.googlesource.com/57751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

It's not needed, and the current expectation is that it will go away
in the future.

Change-Id: I5f46800e748d9ffa484bda6d1738290c8e00ac2b
Reviewed-on: https://go-review.googlesource.com/63751
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Shuffle panics if n < 0, not n <= 0. The comment for the (*Rand).Shuffle
function is already accurate.

Change-Id: I073049310bca9632e50e9ca3ff79eec402122793
Reviewed-on: https://go-review.googlesource.com/63750Reviewed-by: Ian Lance Taylor <iant@golang.org>

rune has a well-defined size, but C.int is implementation-specified.
Using one as the other should require an explicit conversion.

updates #13467

Change-Id: I53ab2478427dca790efdcc197f6b8d9fbfbd1847
Reviewed-on: https://go-review.googlesource.com/63730Reviewed-by: Ian Lance Taylor <iant@golang.org>

I had passed 1 instead of 2 to the SplitAfterN call in
errorstest.check, so all of the cases were erroneously falling through
to the non-regexp case (and passing even if the actual error didn't
match).

Now, we use bytes.HasSuffix to check for the non-regexp case, so we
will not incorrectly match a regexp comment to the non-regexp case.

updates #13467

Change-Id: Ia6be928a495425f2b7bae5001bd01346e115dcfa
Reviewed-on: https://go-review.googlesource.com/63692Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #21559

Change-Id: I3393c4bee4c84fe0724a9c9aeb1a809b1a92eea6
Reviewed-on: https://go-review.googlesource.com/63650
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Joe Tsai <joetsai@google.com>

These two special cases are unnecessary:

1) "~b%d" references only appear during walk, to handle "return"
statements implicitly assigning to blank result parameters. Even if
they could appear, the "inlined and customized version" accidentally
diverged from p.sym in golang.org/cl/33911.

2) The Vargen case is already identical to the default case, and it
never overlaps with the remaining "T.method" case.

Passes toolstash-check.

Change-Id: I03f7e5b75b707b43afc8ed6eb90f43ba93ed17ae
Reviewed-on: https://go-review.googlesource.com/63272
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>

Extract device major/minor number on all the BSDs and set Devmajor and
Devminor in FileInfoHeader. Code based on the corresponding Major/Minor
implementations in golang.org/x/sys/unix.

Change-Id: Ieffa7ce0cdbe6481950de666b2f5f88407a32382
Reviewed-on: https://go-review.googlesource.com/63470Reviewed-by: Joe Tsai <joetsai@google.com>

We only export packages that typechecked successfully, and OTYPE nodes
will always have their Type field set.

Changes the package export format, but only in the compiler-specific
section. No version bump necessary.

Change-Id: I722f5827e73948fceb0432bc8b3b22471fea8f61
Reviewed-on: https://go-review.googlesource.com/63273
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alan Donovan <adonovan@google.com>

Move it from the runtime package, as we will soon add more packages and
functions for it to check.

The test used the testEnv func, which cleaned certain environment
variables from a command, so it was moved to internal/testenv under a
more descriptive (and less ambiguous) name. Add a simple godoc to it
too.

For #21851.

Change-Id: I6f39c1f23b45377718355fafe66ffd87047d8ab6
Reviewed-on: https://go-review.googlesource.com/63550
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>

This makes the test easier to run in isolation and easier to change,
and simplifies the code to run the tests in parallel.

updates #13467

Change-Id: I5622b5cc98276970347da18e95d071dbca3c5cc1
Reviewed-on: https://go-review.googlesource.com/63276
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #19480

Change-Id: I5a621507279d5bb1f3991b7a412d9a63039d464b
Reviewed-on: https://go-review.googlesource.com/38791
Run-TryBot: Sam Whited <sam@samwhited.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

I modified verify() to fail every time to test the change. Before adding
t.Helper() (line 37 is in verify()):
/.../go/src/container/heap/heap_test.go:37: forced failure
FAIL

Afer adding t.Helper() (line 67 is where verify() is called):
/.../go/src/container/heap/heap_test.go:67: forced failure
FAIL

Fixes #21863

Change-Id: I46f0c8ec413cc664358c568fc53e48bb4a1d03d0
Reviewed-on: https://go-review.googlesource.com/63570Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Found with staticcheck. Not terribly important since the test would
likely fail anyway, but at least it will fail with a better explanation
now.

Change-Id: Ic3f9a94a2152404b7873cc8cd47b6db79d78c2e6
Reviewed-on: https://go-review.googlesource.com/62990
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I521ba94356165efc3252ca4b3d364a2bbabd4aab
Reviewed-on: https://go-review.googlesource.com/58010
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This makes it easier to deduce from the field names which overflow
field corresponds to h.buckets and which to h.oldbuckets by aligning
the naming with the buckets fields in hmap.

Change-Id: I8d6a729229a190db0212bac012ead1a3c13cf5d0
Reviewed-on: https://go-review.googlesource.com/62411
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Move the check near the code in evacuate that relies on
the relation evacuateX+1 == evacuateY.

If the relation is fullfilled the check is known to be true
at compile time and removed by the compiler.

Change-Id: I711b75e09047bf347819ccaeec41d244a5883867
Reviewed-on: https://go-review.googlesource.com/62410
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Current implementation doesn't recognize parentheses that may appear in flags
of assembly function as shown below:

	TEXT ·makeFuncStub(SB),(NOSPLIT|WRAPPER),$24

It results in vet reporting false positives and a lot of whitelists are added
for suppressing the false alarms.

This CL fixes the issue and eliminates the redundant whitelists.

Change-Id: Idbc1b42965b31cea8ee7c23d1a6f62feb68e844c
Reviewed-on: https://go-review.googlesource.com/62850
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>

Previously, test7978 failed if the user did not invoke it with
GOTRACEBACK=2 already set in their environment. Environment-sensitive
test are awkward, and in this case there is a very simple workaround:
set the traceback level to the necessary value explicitly.

Change-Id: I7d576f24138aa8a41392148eae11bbeaef558573
Reviewed-on: https://go-review.googlesource.com/63275
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Avoid division in common case. There are 5438 ranges in unicode/tables.go
4110 of them have stride 1.
Stride 1 case got significantly faster. Other stride is a bit slower.
Measured by

import (
	"testing"
	"unicode"
)

func BenchmarkDiv1(b *testing.B) {
	rtb := &unicode.RangeTable{
		R16: []unicode.Range16{
			{0xa800, 0xdfff, 1}, // or 3
		},
	}
	for i := 0; i < b.N; i++ {
		unicode.Is(rtb, rune(0xc700))
	}
}

Div1-6  15.6ns ± 1%   9.9ns ± 1%  -36.54%  (p=0.000 n=10+10)
Div3-6  15.5ns ± 1%  16.1ns ± 1%   +3.67%  (p=0.000 n=10+10)

Helps a bit with xml parsing from issue #21823

XMLsax-6   30.9s ± 0%   29.6s ± 0%  -4.15%  (p=0.000 n=10+9)

Change-Id: Ibac1a91d7b9474d0c134b0add83e56caa62daa20
Reviewed-on: https://go-review.googlesource.com/63390
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This has same readability and allows to inline FullRune for massive
performance gain:

FullASCIIRune-6                      4.36ns ± 0%  1.25ns ± 0%  -71.33%  (p=0.000 n=8+10)
FullJapaneseRune-6                   4.70ns ± 0%  1.42ns ± 1%  -69.68%  (p=0.000 n=9+10)

Change-Id: I95edd6292417a28aac244e40afb713596a087d93
Reviewed-on: https://go-review.googlesource.com/63332
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>

This label was added automatically by grind to remove gotos. As of
today, it's completely useless, as none of its uses need a label to
begin with.

While at it, remove all the redundant breaks too. Leave those that are
the single statement in a case clause body, as that's the style used
throughout std and cmd to clarify when cases are empty.

Change-Id: I3e20068b66b759614e903beab1cc9b2709b31063
Reviewed-on: https://go-review.googlesource.com/62950
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Make arguments semantics clear without the need to look for
json.Indent documentation.

Change-Id: If9adfe9f477a30d426ae83790b0f2578c0a809b7
Reviewed-on: https://go-review.googlesource.com/61670
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Use constants directly, instead of loading address to e. g. AX
and using (AX). Shouldn't affect performance, but makes code a bit
nicer.

Change-Id: Ifa138e54d3d2b2f4ad71e4ef4b9368ea79eb30f4
Reviewed-on: https://go-review.googlesource.com/62010Reviewed-by: Adam Langley <agl@golang.org>

Unify colons (outside of <strong></strong>) and add a missing space in
the list of groups of diagnostics solutions.

Change-Id: Icbcd94427d4905dd88c4ea82aaa5dbf064c00990
Reviewed-on: https://go-review.googlesource.com/63111Reviewed-by: JBD <jbd@google.com>

Write the moving timer only once, since it is overwritten
by swapped timers on all the iterations except the last one.

Additionally, explicitly pass timers heap into siftupTimer
and siftdownTimer in order to make the code more clear.

Relevant benchmark results on linux/amd64:

Stop                      700µs ± 7%   608µs ± 1%  -13.13%  (p=0.000 n=10+10)
Stop-2                    440µs ± 4%   376µs ± 4%  -14.48%  (p=0.000 n=10+10)
Stop-4                    339µs ± 2%   330µs ± 3%   -2.66%  (p=0.015 n=10+10)
SimultaneousAfterFunc     702µs ± 9%   709µs ± 1%     ~     (p=0.436 n=9+9)
SimultaneousAfterFunc-2   573µs ± 2%   546µs ± 2%   -4.71%  (p=0.000 n=10+10)
SimultaneousAfterFunc-4   387µs ± 1%   368µs ± 1%   -4.89%  (p=0.000 n=8+10)
StartStop                 268µs ± 0%   270µs ± 0%   +0.91%  (p=0.000 n=9+9)
StartStop-2               155µs ± 6%   145µs ± 6%   -6.70%  (p=0.000 n=10+10)
StartStop-4               125µs ± 1%   124µs ± 1%     ~     (p=0.065 n=10+9)

Change-Id: I3685835b5e3e82844e2e5e73ee03a1e22100bf0e
Reviewed-on: https://go-review.googlesource.com/63110Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

After the number of lost extra events are written to the the cpuprof log,
the number of lost extra events should be set to zero, or else, the next
time time addExtra is logged, lostExtra will be overcounted. This change
resets lostExtra after its value is written to the log.

Fixes #21836

Change-Id: I8a6ac9c61e579e7a5ca7bdb0f3463f8ae8b9f863
Reviewed-on: https://go-review.googlesource.com/63270Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Use per-P timers, so each P may work with its own timers.

This CL improves performance on multi-CPU systems
in the following cases:

- When serving high number of concurrent connections
  with read/write deadlines set (for instance, highly loaded
  net/http server).

- When using high number of concurrent timers. These timers
  may be implicitly created via context.WithDeadline
  or context.WithTimeout.

Production servers should usually set timeout on connections
and external requests in order to prevent from resource leakage.
See https://blog.cloudflare.com/the-complete-guide-to-golang-net-http-timeouts/

Below are relevant benchmark results for various GOMAXPROCS values
on linux/amd64:

context package:

name                                     old time/op  new time/op  delta
WithTimeout/concurrency=40      4.92µs ± 0%  5.17µs ± 1%  +5.07%  (p=0.000 n=9+9)
WithTimeout/concurrency=4000    6.03µs ± 1%  6.49µs ± 0%  +7.63%  (p=0.000 n=8+10)
WithTimeout/concurrency=400000  8.58µs ± 7%  9.02µs ± 4%  +5.02%  (p=0.019 n=10+10)

name                                     old time/op  new time/op  delta
WithTimeout/concurrency=40-2      3.70µs ± 1%  2.78µs ± 4%  -24.90%  (p=0.000 n=8+9)
WithTimeout/concurrency=4000-2    4.49µs ± 4%  3.67µs ± 5%  -18.26%  (p=0.000 n=10+10)
WithTimeout/concurrency=400000-2  6.16µs ±10%  5.15µs ±13%  -16.30%  (p=0.000 n=10+10)

name                                     old time/op  new time/op  delta
WithTimeout/concurrency=40-4      3.58µs ± 1%  2.64µs ± 2%  -26.13%  (p=0.000 n=9+10)
WithTimeout/concurrency=4000-4    4.17µs ± 0%  3.32µs ± 1%  -20.36%  (p=0.000 n=10+10)
WithTimeout/concurrency=400000-4  5.57µs ± 9%  4.83µs ±10%  -13.27%  (p=0.001 n=10+10)

time package:

name                     old time/op  new time/op  delta
AfterFunc                6.15ms ± 3%  6.07ms ± 2%     ~     (p=0.133 n=10+9)
AfterFunc-2              3.43ms ± 1%  3.56ms ± 1%   +3.91%  (p=0.000 n=10+9)
AfterFunc-4              5.04ms ± 2%  2.36ms ± 0%  -53.20%  (p=0.000 n=10+9)
After                    6.54ms ± 2%  6.49ms ± 3%     ~     (p=0.393 n=10+10)
After-2                  3.68ms ± 1%  3.87ms ± 0%   +5.14%  (p=0.000 n=9+9)
After-4                  6.66ms ± 1%  2.87ms ± 1%  -56.89%  (p=0.000 n=10+10)
Stop                      698µs ± 2%   689µs ± 1%   -1.26%  (p=0.011 n=10+10)
Stop-2                    729µs ± 2%   434µs ± 3%  -40.49%  (p=0.000 n=10+10)
Stop-4                    837µs ± 3%   333µs ± 2%  -60.20%  (p=0.000 n=10+10)
SimultaneousAfterFunc     694µs ± 1%   692µs ± 7%     ~     (p=0.481 n=10+10)
SimultaneousAfterFunc-2   714µs ± 3%   569µs ± 2%  -20.33%  (p=0.000 n=10+10)
SimultaneousAfterFunc-4   782µs ± 2%   386µs ± 2%  -50.67%  (p=0.000 n=10+10)
StartStop                 267µs ± 3%   274µs ± 0%   +2.64%  (p=0.000 n=8+9)
StartStop-2               238µs ± 2%   140µs ± 3%  -40.95%  (p=0.000 n=10+8)
StartStop-4               320µs ± 1%   125µs ± 1%  -61.02%  (p=0.000 n=9+9)
Reset                    75.0µs ± 1%  77.5µs ± 2%   +3.38%  (p=0.000 n=10+10)
Reset-2                   150µs ± 2%    40µs ± 5%  -73.09%  (p=0.000 n=10+9)
Reset-4                   226µs ± 1%    33µs ± 1%  -85.42%  (p=0.000 n=10+10)
Sleep                     857µs ± 6%   878µs ± 9%     ~     (p=0.079 n=10+9)
Sleep-2                   617µs ± 4%   585µs ± 2%   -5.21%  (p=0.000 n=10+10)
Sleep-4                   689µs ± 3%   465µs ± 4%  -32.53%  (p=0.000 n=10+10)
Ticker                   55.9ms ± 2%  55.9ms ± 2%     ~     (p=0.971 n=10+10)
Ticker-2                 28.7ms ± 2%  28.1ms ± 1%   -2.06%  (p=0.000 n=10+10)
Ticker-4                 14.6ms ± 0%  13.6ms ± 1%   -6.80%  (p=0.000 n=9+10)

Fixes #15133

Change-Id: I6f4b09d2db8c5bec93146db6501b44dbfe5c0ac4
Reviewed-on: https://go-review.googlesource.com/34784Reviewed-by: Austin Clements <austin@google.com>

Skip the ones that have multiple uses for now. Also had to rename the
importComment variable as it shadowed the top-level func by the same
name.

Change-Id: I796285aa7b4fdf2c39e652666390427d37b063ee
Reviewed-on: https://go-review.googlesource.com/63150
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

It doesn't change the outcome. It might have been useful at some point
to avoid Replace from doing work or allocating. However, nowadays the
func returns early without doing any work if Count returns 0.

Change-Id: Id69dc74042a6e39672b405016484db8b50f43d58
Reviewed-on: https://go-review.googlesource.com/62991
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Dave Cheney <dave@cheney.net>

Refactor walkrange to treat "for _ = range a" as "for range a".

This avoids generating some later discarded nodes in the compiler.

Passes toolstash -cmp.

Change-Id: Ifb2e1ca3b8519cbb67e8ad5aad514af9d18f1ec4
Reviewed-on: https://go-review.googlesource.com/61017
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Calling response.Body.Close() early would generarate a race before this.
Since closing would return early before the main code path had a chance
to reset the request canceler. Having a non-nil request canceler at the
start of the next request would cause a "request canceled" error.

Here we simply wait for the eofc channel to be closed before returning
from earlyCloseFn, ensuring that the caller won't be re-using that
Request object before we have a chance to reset the request canceler to
nil.

Fixes #21838

Change-Id: I641815526c6ac63d1816c9b6ad49d73715f7a5cb
Reviewed-on: https://go-review.googlesource.com/62891
Run-TryBot: Tom Bergan <tombergan@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Tom Bergan <tombergan@google.com>

fixes #21619

Change-Id: I5bb513dfc8cac875b06a262eec40b5863ae23a4c
Reviewed-on: https://go-review.googlesource.com/62370Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This enables support for the buildmode plugin on
ppc64le.

Fixes #20756

Change-Id: I83241ff63f9b5c366fe0496cf46a3f67d75d08ac
Reviewed-on: https://go-review.googlesource.com/55850
Run-TryBot: Lynn Boger <laboger@linux.vnet.ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>

For very small blocks significant time is spent in checkSum function,
adding necessary padding. Instead of writing it byte by byte, copy
encoding/binary PutUint functions, which are compiled into single mov.

name            old time/op    new time/op    delta
Hash8Bytes-6       344ns ± 0%     310ns ± 0%   -9.78%  (p=0.000 n=10+9)
Hash320Bytes-6    1.28µs ± 0%    1.25µs ± 0%   -2.58%  (p=0.000 n=10+10)
Hash1K-6          2.51µs ± 0%    2.47µs ± 0%   -1.67%  (p=0.000 n=10+10)
Hash8K-6          15.8µs ± 0%    15.7µs ± 1%   -0.21%  (p=0.023 n=10+10)

name            old speed      new speed      delta
Hash8Bytes-6    23.2MB/s ± 0%  25.7MB/s ± 0%  +10.77%  (p=0.000 n=10+9)
Hash320Bytes-6   249MB/s ± 0%   256MB/s ± 0%   +2.65%  (p=0.000 n=10+10)
Hash1K-6         408MB/s ± 0%   414MB/s ± 0%   +1.70%  (p=0.000 n=10+10)

Change-Id: I3975ee929465c7dd137d0ca757ad3792a004e1a3
Reviewed-on: https://go-review.googlesource.com/54391
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Filippo Valsorda <hi@filippo.io>