Skip to content

G
go
Switch branch/tag
  1. 16 Jul, 2019 2 commits
    • Bryan C. Mills's avatar
      cmd/go: tighten the check for pseudo-version base tags · 6bf2767c
      Bryan C. Mills authored 
      Do not allow a pseudo-version derived from a canonical tag to refer to
the same revision as the tag itself. It's unnecessary (because
canonical tags already have a total ordering) and confusing (the
pseudo-version appears to come after the tag, but actually refers to
the exact same revision).

Updates #32879
Updates #27173

Change-Id: I02befedbe89c8819bdd93e470783ce63fc813193
Reviewed-on: https://go-review.googlesource.com/c/go/+/184720
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarJay Conrod <jayconrod@google.com>
      6bf2767c
    • Jay Conrod's avatar
      cmd/go: clarify error text for module path mismatch · 0da58d07
      Jay Conrod authored 
      This error occurs when a module is loaded with one name (for example,
github.com/golang/lint) but declares a different path in its go.mod
(golang.org/x/lint). The current text "unexpected module path" is
confusing. It doesn't explain why the path was unexpected, and it's
not clear what was expected.

With this change, the error text includes the module and version
containing the go.mod file with the error, the declared module path,
and the loaded module path. The paths are vertically aligned so
differences are visually obvious. As with other module version errors,
the shortest chain of requirements is printed.

This change supercedes CL 158477.

Fixes #28489

Change-Id: Ieb07d00bcae182376d7be6aad111c84fbf784354
Reviewed-on: https://go-review.googlesource.com/c/go/+/185985
Run-TryBot: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      0da58d07
  3. 15 Jul, 2019 6 commits
  5. 14 Jul, 2019 1 commit
  7. 12 Jul, 2019 3 commits
  9. 11 Jul, 2019 2 commits
  11. 10 Jul, 2019 6 commits
  13. 09 Jul, 2019 2 commits
    • Gernot Vormayr's avatar
      cmd/cgo: fix check for conversion of ptr to struct field · 84fce983
      Gernot Vormayr authored 
      According to the documentation "When passing a pointer to a field in a
struct, the Go memory in question is the memory occupied by the field,
not the entire struct.". checkAddr states that this should also work
with type conversions, which is implemented in isType. However,
ast.StarExpr must be enclosed in ast.ParenExpr according to the go spec
(see example below), which is not considered in the checks.

Example:
    // struct Si { int i; int *p; }; void f(struct I *x) {}
    import "C"
    type S {
        p *int
        i C.struct_Si
    }
    func main() {
        v := &S{new(int)}
        C.f((*C.struct_I)(&v.i)) // <- panic
    }

This example will cause cgo to emit a cgoCheck that checks the whole
struct S instead of just S.i causing the panic "cgo argument has Go
pointer to Go pointer".

This patch fixes this situation by adding support for ast.ParenExpr to
isType and adds a test, that fails without the fix.

Fixes #32970.

Change-Id: I15ea28c98f839e9fa708859ed107a2e5f1483133
Reviewed-on: https://go-review.googlesource.com/c/go/+/185098
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      84fce983
    • LE Manh Cuong's avatar
      cmd/compile: fix unsafeValue handles OLSH/ORSH wrong · 06ef108c
      LE Manh Cuong authored 
      For OLSH/ORSH, the right node is not a uintptr-typed. However,
unsafeValue still be called recursively for it, causing the
compiler crashes.

To fixing, the right node only needs to be evaluated
for side-effects, so just discard its value.

Fixes #32959

Change-Id: I34d5aa0823a0545f6dad1ec34774235ecf11addc
Reviewed-on: https://go-review.googlesource.com/c/go/+/185039
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarDavid Chase <drchase@google.com>
Reviewed-by: default avatarMatthew Dempsky <mdempsky@google.com>
      06ef108c
  15. 08 Jul, 2019 5 commits
    • Agniva De Sarker's avatar
      Revert "go/parser: include more comments in a struct or interface" · a19c0ced
      Agniva De Sarker authored 
      This reverts commit https://golang.org/cl/161177/.

Reason for revert: this led to non-contiguous comments spaced
by an empty line to be grouped into a single CommentGroup

Fixes #32944
Updates #10858

Change-Id: I5e16663b308c3b560496da8e66c33befdf9ed9dd
Reviewed-on: https://go-review.googlesource.com/c/go/+/185040Reviewed-by: default avatarRobert Griesemer <gri@golang.org>
      a19c0ced
    • Alexander Rakoczy's avatar
      doc: document Go 1.12.7 · c893ea8f
      Alexander Rakoczy authored 
      Change-Id: Id5d2f4cc6bc310bed2516ce0f50c395802475f66
Reviewed-on: https://go-review.googlesource.com/c/go/+/185258Reviewed-by: default avatarDmitri Shuralyov <dmitshur@golang.org>
      c893ea8f
    • Alexander Rakoczy's avatar
      doc: document Go 1.11.12 · 0fddd668
      Alexander Rakoczy authored 
      Change-Id: I1b2e369befc58b3f88ac201442a2d9f76d87d54e
Reviewed-on: https://go-review.googlesource.com/c/go/+/185257Reviewed-by: default avatarDmitri Shuralyov <dmitshur@golang.org>
      0fddd668
    • Russ Cox's avatar
      net/http: fix Transport.MaxConnsPerHost limits & idle pool races · fbaf881c
      Russ Cox authored 
      There were at least three races in the implementation of the pool of
idle HTTP connections before this CL.

The first race is that HTTP/2 connections can be shared for many
requests, but each requesting goroutine would take the connection out
of the pool and then immediately return it before using it; this
created unnecessary, tiny little race windows during which another
goroutine might dial a second connection instead of reusing the first.
This CL changes the idle pool to just leave the HTTP/2 connection in
the pool permanently (until there is reason to close it), instead of
doing the take-it-out-put-it-back dance race.

The second race is that “is there an idle connection?” and
“register to wait for an idle connection” were implemented as two
separate steps, in different critical sections. So a client could end
up registered to wait for an idle connection and be waiting or perhaps
dialing, not having noticed the idle connection sitting in the pool
that arrived between the two steps.

The third race is that t.getIdleConnCh assumes that the inability to
send on the channel means the client doesn't need the result, when it
could mean that the client has not yet entered the select.
That is, the main dial does:

	idleConnCh := t.getIdleConnCh(cm)
	select {
	case v := <-dialc:
		...
	case pc := <-idleConnCh
		...
	...
	}

But then tryPutIdleConn does:

	waitingDialer := t.idleConnCh[key] // what getIdleConnCh(cm) returned
	select {
	case waitingDialer <- pconn:
		// We're done ...
		return nil
	default:
		if waitingDialer != nil {
			// They had populated this, but their dial won
			// first, so we can clean up this map entry.
			delete(t.idleConnCh, key)
		}
	}

If the client has returned from getIdleConnCh but not yet reached the
select, tryPutIdleConn will be unable to do the send, incorrectly
conclude that the client does not care anymore, and put the connection
in the idle pool instead, again leaving the client dialing unnecessarily
while a connection sits in the idle pool.

(It's also odd that the success case does not clean up the map entry,
and also that the map has room for only a single waiting goroutine for
a given host.)

None of these races mattered too much before Go 1.11: at most they
meant that connections were not reused quite as promptly as possible,
or a few more than necessary would be created. But Go 1.11 added
Transport.MaxConnsPerHost, which limited the number of connections
created for a given host. The default is 0 (unlimited), but if a user
did explicitly impose a low limit (2 is common), all these misplaced
conns could easily add up to the entire limit, causing a deadlock.
This was causing intermittent timeouts in TestTransportMaxConnsPerHost.

The addition of the MaxConnsPerHost support added its own races.

For example, here t.incHostConnCount could increment the count
and return a channel ready for receiving, and then the client would
not receive from it nor ever issue the decrement, because the select
need not evaluate these two cases in order:

	select {
	case <-t.incHostConnCount(cmKey):
		// count below conn per host limit; proceed
	case pc := <-t.getIdleConnCh(cm):
		if trace != nil && trace.GotConn != nil {
			trace.GotConn(httptrace.GotConnInfo{Conn: pc.conn, Reused: pc.isReused()})
		}
		return pc, nil
	...
	}

Obviously, unmatched increments are another way to get to a deadlock.
TestTransportMaxConnsPerHost deadlocked approximately 100% of
the time with a small random sleep added between incHostConnCount
and the select:

	ch := t.incHostConnCount(cmKey):
	time.Sleep(time.Duration(rand.Intn(10))*time.Millisecond)
	select {
	case <-ch
		// count below conn per host limit; proceed
	case pc := <-t.getIdleConnCh(cm):
		...
	}

The limit also did not properly apply to HTTP/2, because of the
decrement being attached to the underlying net.Conn.Close
and net/http not having access to the underlying HTTP/2 conn.
The alternate decrements for HTTP/2 may also have introduced
spurious decrements (discussion in #29889). Perhaps those
spurious decrements or other races caused the other intermittent
non-deadlock failures in TestTransportMaxConnsPerHost,
in which the HTTP/2 phase created too many connections (#31982).

This CL replaces the buggy, racy code with new code that is hopefully
neither buggy nor racy.

Fixes #29889.
Fixes #31982.
Fixes #32336.

Change-Id: I0dfac3a6fe8a6cdf5f0853722781fe2ec071ac97
Reviewed-on: https://go-review.googlesource.com/c/go/+/184262
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarBryan C. Mills <bcmills@google.com>
      fbaf881c
    • Than McIntosh's avatar
      test: add new test case for gccgo compiler bug · ddc8439b
      Than McIntosh authored 
      Test case that causes incorrect compiler error from gccgo.

Updates #32922

Change-Id: I59432a8e8770cf03eda293f6d110c081c18fa88b
Reviewed-on: https://go-review.googlesource.com/c/go/+/184918
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
      ddc8439b
  17. 06 Jul, 2019 1 commit
  19. 05 Jul, 2019 5 commits
    • Austin Clements's avatar
      cmd/cgo: accept weak dynamic imports · a2fb5cd8
      Austin Clements authored 
      cgo produces dynamic imports for Go binaries by scanning the dynamic
imports table of a binary produced by the system C compiler and
linker. Currently, since it uses elf.File.ImportedSymbols, it only
reads global symbols. Unfortunately, recent versions of lld emit weak
symbol imports for several pthread symbols, which means the cgo tool
doesn't emit dynamic imports for them, which ultimately causes linking
of cgo binaries to fail.

Fix this by using elf.File.DynamicSymbols instead and filtering down
to both global and weak symbols.

Fixes #31912.

Change-Id: If346a7eca6733e3bfa2cccf74a9cda02a3e81d38
Reviewed-on: https://go-review.googlesource.com/c/go/+/184100
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      a2fb5cd8
    • Austin Clements's avatar
      debug/elf: add version information to all dynamic symbols · 7aac3436
      Austin Clements authored 
      Currently, File.ImportedSymbols is the only API that exposes the GNU
symbol version information for dynamic symbols. Unfortunately, it also
filters to specific types of symbols, and only returns symbol names.

The cgo tool is going to need symbol version information for more
symbols. In order to support this and make the API more orthogonal,
this CL adds version information to the Symbol type and updates
File.DynamicSymbols to fill this in. This has the downside of
increasing the size of Symbol, but seems to be the most natural API
for exposing this. I also explored 1) adding a method to get the
version information for the i'th dynamic symbol, but we don't use
symbol indexes anywhere else in the API, and it's not clear if this
index would be 0-based or 1-based, and 2) adding a
DynamicSymbolVersions method that returns a slice of version
information that parallels the DynamicSymbols slice, but that's less
efficient to implement and harder to use.

For #31912.

Change-Id: I69052ac3894f7af2aa9561f7085275130e0cf717
Reviewed-on: https://go-review.googlesource.com/c/go/+/184099
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
      7aac3436
    • Keith Randall's avatar
      test: add another test for issue 32680 · 9a00e646
      Keith Randall authored 
      Update #32680

Change-Id: I0318c22c22c5cd6ab6441d1aa2d1a40d20d71242
Reviewed-on: https://go-review.googlesource.com/c/go/+/185137
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarEmmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: default avatarDavid Chase <drchase@google.com>
      9a00e646
    • Mohit Agarwal's avatar
      doc/go1.13: fix links and a closing tag · e94472a3
      Mohit Agarwal authored 
      - fix link for `Time.Format`
- fix closing tag for `go get`
- add links for `runtime.Caller`, `runtime.Callers`
- remove link for `TypedArrayOf` since it has been removed (CL 177537)

Change-Id: I1dc38226e6d91c68fbd2f02c1acfad5327f4ebe8
Reviewed-on: https://go-review.googlesource.com/c/go/+/185038Reviewed-by: default avatarEmmanuel Odeke <emm.odeke@gmail.com>
      e94472a3
    • Patrik Lundin's avatar
      net/http: stop ExampleServer_Shutdown from hanging on error · 04e2e81e
      Patrik Lundin authored 
      Running the example code when not having permissions
to bind to port 80 will cause the program to hang after
printing the error message.

Change-Id: I2433ba2629b362fc8f1731e40cab5eea72ec354f
GitHub-Last-Rev: 0bb3dc08b6f646470fc6ff208ea12bca901a2299
GitHub-Pull-Request: golang/go#32947
Reviewed-on: https://go-review.googlesource.com/c/go/+/185157Reviewed-by: default avatarEmmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      04e2e81e
  21. 03 Jul, 2019 6 commits
  23. 02 Jul, 2019 1 commit
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7