The test deliberately constructs an invalid pointer, so don't check it.

Fixes #35379

Change-Id: Ifeff3484740786b0470de3a4d2d4103d91e06f5d
Reviewed-on: https://go-review.googlesource.com/c/go/+/205717Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Change-Id: I7f5947cef3ec43746f60abca556dda29a705caf7
GitHub-Last-Rev: b9aefd06abdaee854671451711579dd5bd33bd26
GitHub-Pull-Request: golang/go#35404
Reviewed-on: https://go-review.googlesource.com/c/go/+/205610Reviewed-by: Rob Pike <r@golang.org>

Change-Id: Ib29da1ad77c9a243a623d25113c6f8dd0261f42a
Reviewed-on: https://go-review.googlesource.com/c/go/+/205601Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change is based on the previous discussion in CL 202442.

Fixes #34634

Change-Id: I1319aa26d5cfcd034bc576555787b3ca79968c38
Reviewed-on: https://go-review.googlesource.com/c/go/+/205637
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This change employs the same strategy as in CL 203017
to detect when vendoring is in use, and if so treats
the vendor directory as a (non-module, prefixless) root.

The integration test also verifies that the 'std' and 'cmd'
modules are included and their vendored dependencies are
visible (as they are with 'go list') even when outside of
those modules.

Fixes #35224

Change-Id: I18cd01218e9eb97c1fc6e2401c1907536b0b95f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/205577
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

Factor out the direct CALL identification code from objabi.IsDirectJump and
use this in two places that have separately maintained lists of reloc types.
Provide an objabi.IsDirectCallOrJump function that implements the original
behaviour of objabi.IsDirectJump.

Change-Id: I48131bae92b2938fd7822110d53df0b4ffb35766
Reviewed-on: https://go-review.googlesource.com/c/go/+/196577
Run-TryBot: Joel Sing <joel@sing.id.au>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Don't print to stdout in non-verbose (-v) test mode.

Exception: Timing output (2 lines) of TestStdLib. If
we want to disable that as well we should use another
flag to differenciate between -verbose output and
measurement results. Leaving alone for now.

Fixes #35223.

Change-Id: Ie8160760e8db1138f9031888d654eaeab202128c
Reviewed-on: https://go-review.googlesource.com/c/go/+/204039Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This CL adds basic encode test for mips64x and
most of the instructions are cross checked with 'gas'

Update #35008

Change-Id: I18bb524897aa745bfe23db43fcbb44c3b009463c
Reviewed-on: https://go-review.googlesource.com/c/go/+/204297Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Otherwise, we can get into a deadlock: sysmon takes the scheduler lock
and calls timeSleepUntil which takes each P's timer lock. Simultaneously,
some P calls runtimer (holding the P's own timer lock) which wakes up
the scavenger, calling goready, calling wakep, calling startm, getting
the scheduler lock. Now the sysmon thread is holding the scheduler lock
and trying to get a P's timer lock, while some other thread running on
that P is holding the P's timer lock and trying to get the scheduler lock.

So change sysmon to call timeSleepUntil without holding the scheduler
lock, and change timeSleepUntil to use allpLock, which is only held for
limited periods of time and should never compete with timer locks.

This hopefully

Fixes #35375

At least it should fix the linux-arm64-packet builder problems,
which occurred more reliably as that system has GOMAXPROCS == 96,
giving a lot more scope for this deadlock.

Change-Id: I7a7917daf7a4882e0b27ca416e4f6300cfaaa774
Reviewed-on: https://go-review.googlesource.com/c/go/+/205558
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>

Updates #31870
Updates #33326
Fixes #34822

Change-Id: I1337f171133c20800eacc6b0955ede5a394ea7eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/204878
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

The -Wl,-headerpad, -Wl,-no_pie, -Wl,-pagezero_size flags are
incompatible with the bitcode-related flags used for iOS.

We already omitted the flags on darwin/arm and darwin/arm64; this change
omits the flags on all platforms != macOS so that building for the iOS
simulator works.

Updates #32963

Change-Id: Ic9af0daf01608f5ae0f70858e3045e399de7e95b
Reviewed-on: https://go-review.googlesource.com/c/go/+/205340
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

WaitForSigusr1 registers a callback to be called on SIGUSR1 directly
from the runtime signal handler. Currently, this callback has a write
barrier in it, which can crash with a nil P if the GC is active and
the signal arrives on an M that doesn't have a P.

Fix this by recording the ID of the M that receives the signal instead
of the M itself, since that's all we needed anyway. To make sure there
are no other problems, this also lifts the callback into a package
function and marks it "go:nowritebarrierrec".

Fixes #35248.

Updates #35276, since in principle a write barrier at exactly the
wrong time while entering the scheduler could cause issues, though I
suspect that bug is unrelated.

Change-Id: I47b4bc73782efbb613785a93e381d8aaf6850826
Reviewed-on: https://go-review.googlesource.com/c/go/+/204620
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

token.IsExported expects to be passed a token, and does not check for
non-token arguments such as "C:\workdir\go\src\text".

While we're at it, clean up a few other parts of the code that
are assuming a package path where a directory may be passed instead.
There are probably others lurking around here, but I believe this
change is sufficient to get past the test failures on the
windows-amd64-longtest builder.

Fixes #35236

Change-Id: Ic79fa035531ca0777f64b1446c2f9237397b1bdf
Reviewed-on: https://go-review.googlesource.com/c/go/+/204442
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>

With buildmode=c-archive, "runtime.types" type isn't STYPE but
STYPERELRO.
On AIX, this symbol is present in the symbol table and not under
typerel.* outersymbol. Therefore, the size of typerel.* must be adapted.

Fixes #35342

Change-Id: Ib982c6557d9b41bc3d8775e4825650897f9e0ee6
Reviewed-on: https://go-review.googlesource.com/c/go/+/205338
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

We seem to lack any tests for some corner cases of itab.init
(multiple methods with the same name, breaking itab.init doesn't
seem to fail any tests). We also lack tests that fix text of panics.
Add more tests for itab.init.

Change-Id: Id6b536179ba6b0d45c3cb9dc1c66b9311d0ab85e
Reviewed-on: https://go-review.googlesource.com/c/go/+/202451
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The check is not relevant anymore.
The comment claims that go run does not rebuild packages,
but this is not true. And we use go build anyway.
We may have added the check because without caching
rebuilding everything starting from runtime for each test
takes a while. But now we have caching.
So from every side this check just adds code and pain.

Change-Id: Ifbbb643724100622e5f9db884339b67cde4ba729
Reviewed-on: https://go-review.googlesource.com/c/go/+/202450
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The hash is used in type switches. However, compiler statically generates itab's
for all interface/type pairs used in switches (which are added to itabTable
in itabsinit). The dynamically-generated itab's never participate in type switches,
and thus the hash is irrelevant.

Change-Id: I4f6e37be31b8f5605cca7a1806cb04708e948cea
Reviewed-on: https://go-review.googlesource.com/c/go/+/202448
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Keith Randall <khr@golang.org>

Change-Id: Ide3b689dd6808fc82f6310e4608e6d3574fafa82
Reviewed-on: https://go-review.googlesource.com/c/go/+/205339
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Previously we would always “upgrade” to the semantically-highest
version, even if a newer compatible version exists.

That made certain classes of mistakes irreversible: in general we
expect users to address bad releases by releasing a new (higher)
version, but if the bad release was an unintended +incompatible
version, then no release that includes a go.mod file can ever have a
higher version, and the bad release will be treated as “latest”
forever.

Instead, when considering a +incompatible version we now consult the
latest compatible (v0 or v1) release first. If the compatible release
contains a go.mod file, we ignore the +incompatible releases unless
they are expicitly requested (by version, commit ID, or branch name).

Fixes #34165
Updates #34189

Change-Id: I7301eb963bbb91b21d3b96a577644221ed988ab7
Reviewed-on: https://go-review.googlesource.com/c/go/+/204440
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

Also revert an incidental 'gofmt' of a vendored file from CL 205240.

Updates #34822

Change-Id: I82a015d865db4d865b4776a8013312f25dbb9181
Reviewed-on: https://go-review.googlesource.com/c/go/+/205539
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

codeRepo.Versions previously checked every possible +incompatible
version for a 'go.mod' file. That is wasteful and counterproductive.

It is wasteful because typically, a project will adopt modules at some
major version, after which they will (be required to) use semantic
import paths for future major versions.

It is counterproductive because it causes an accidental
'+incompatible' tag to exist, and no compatible tag can have higher
semantic precedence.

This change prunes out some of the +incompatible versions in
codeRepo.Versions, eliminating the “wasteful” part but not all of the
“counterproductive” part: the extraneous versions can still be fetched
explicitly, and proxies may include them in the @v/list endpoint.

Updates #34165
Updates #34189
Updates #34533

Change-Id: Ifc52c725aa396f7fde2afc727d0d5950acd06946
Reviewed-on: https://go-review.googlesource.com/c/go/+/204439
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

We had some issues with reports being marked as spam, so I added a
filter to never mark as spam something that mentions the word
"vulnerability". We get too much spam at that address to disable the
filter entirely, so instead meantion the bypass in the docs.

Change-Id: Idb4dabcf51a9dd8234a2d571cd020c970b0a582c
Reviewed-on: https://go-review.googlesource.com/c/go/+/205538Reviewed-by: Katie Hockman <katie@golang.org>

Fixes #35247

Change-Id: I4f2e243c89e9f745b82bcd181add87fad1443171
Reviewed-on: https://go-review.googlesource.com/c/go/+/205457
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>

dsa.Verify might currently use a nil s inverse in a
multiplication if the public key contains a non-prime Q,
causing a panic. Change this to check that the mod
inverse exists before using it.

Fixes CVE-2019-17596

Fixes #34960

Change-Id: I94d5f3cc38f1b5d52d38dcb1d253c71b7fd1cae7
Reviewed-on: https://team-review.git.corp.google.com/c/golang/go-private/+/572809Reviewed-by: Filippo Valsorda <valsorda@google.com>
Reviewed-on: https://go-review.googlesource.com/c/go/+/205441
Run-TryBot: Katie Hockman <katie@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Filippo Valsorda <filippo@golang.org>

Fixes #35317

Change-Id: Id858a25dc16a1bbff1802d25bcd4aca31c1133bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/205067
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

When using cgo, we save G to TLS, and when a signal happens, we
load G from TLS in sigtramp. This should give us a valid G. Don't
try to fetch from the signal stack. In particular, C code may
change the signal stack or call our signal handler directly (e.g.
TSAN), so we are not necessarily running on the original gsignal
stack where we saved G.

Also skip saving G on the signal stack when using cgo.

Updates #35249.

Change-Id: I40749ce6682709bd4ebfdfd9f23bd0f317fc197d
Reviewed-on: https://go-review.googlesource.com/c/go/+/204519Reviewed-by: Ian Lance Taylor <iant@golang.org>

In the normal case, sigFetchG just returns the G register. But in
the case that sigFetchG fetches the G from somewhere else, the G
register still holding an invalid value. Setg here to make sure
they match.

This is particularly useful because setGsignalStack, called by
adjustSignalStack from sigtrampgo before setg to gsignal,
accesses the G register.

Should fix #35249.

Change-Id: I64c85143cb05cdb2ecca7f9936dbd8bfec186c2d
Reviewed-on: https://go-review.googlesource.com/c/go/+/204441Reviewed-by: Ian Lance Taylor <iant@golang.org>

Before this CL adjustTimers left timers being moved in an inconsistent
state: status timerWaiting but not on a P. Simplify the code by
leaving the timers in timerMoving status until they are actually moved.
Other functions (deltimer, modtimer) will wait until the move is complete
before changing anything on the timer. This does leave timers in timerMoving
state for longer, but still not all that long.

Fixes #35367

Change-Id: I31851002fb4053bd6914139125b4c82a68bf6fb2
Reviewed-on: https://go-review.googlesource.com/c/go/+/205418
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>

Updates #32027

Change-Id: Ifc9427f35188c3fd356917d8510f3e01866ebca8
Reviewed-on: https://go-review.googlesource.com/c/go/+/205065
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

TestFormats adds ~3s of running time to the test, which may be
slightly annoying in an edit/compile/test cycle but is negligible in a
TryBot run.

The test keeps regressing in the longtest builders, requiring a manual
fix. Instead, run it even in short mode on the builders, so that
TryBot runs will detect regressions ahead of time.

Updates #34907
Updates #33915
Updates #28621

Change-Id: I6f9bf0f2ca929a743438310b86d85d8673c720bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/205440
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Adds missing tests for all the types:
* OneByteReader
* HalfReader
* DataErrReader
* TimeoutReader
* TruncateWriter
* writeLogger
* readLogger

Fixes #33650

Change-Id: I1c773f9f1625ff33a1d0b5a045c72a73a9eca9ce
GitHub-Last-Rev: 2ab650677bb9cad43ea2ce620c9898123c7ec396
GitHub-Pull-Request: golang/go#33651
Reviewed-on: https://go-review.googlesource.com/c/go/+/190259Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Once defined, a stack slot holding an open-coded defer arg should always be marked
live, since it may be used at any time if there is a panic. These stack slots are
typically kept live naturally by the open-defer code inlined at each return/exit point.
However, we need to do extra work to make sure that they are kept live if a
function has an infinite loop or a panic exit.

For this fix, only in the case of a function that is using open-coded defers, we
compute the set of blocks (most often empty) that cannot reach a return or a
BlockExit (panic) because of an infinite loop. Then, for each block b which
cannot reach a return or BlockExit or is a BlockExit block, we mark each defer arg
slot as live, as long as the definition of the defer arg slot dominates block b.

For this change, had to export (*Func).sdom (-> Sdom) and SparseTree.isAncestorEq
(-> IsAncestorEq)

Updates #35277

Change-Id: I7b53c9bd38ba384a3794386dd0eb94e4cbde4eb1
Reviewed-on: https://go-review.googlesource.com/c/go/+/204802
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

TestExecutableGOROOT, unlike most other tests in go_test.go, was
running subcommands in a process with an environment derived directly
from os.Environ(), rather than using tg.env on its testgoData object.

Since tg.env is what sets GO111MODULE=off for GOPATH-mode tests, that
caused TestExecutableGOROOT to unexpectedly run in module mode instead
of GOPATH mode. If the user's environment included 'GOFLAGS=-mod=mod',
that would cause the test to spuriously fail due to the inability to
download modules to $HOME (which in this test binary is hard-coded to
"/test-go-home-does-not-exist").

Updates #33848

Change-Id: I2f343008dd9e38cd76b9919eafd5a3181d0cbd6f
Reviewed-on: https://go-review.googlesource.com/c/go/+/205064
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

The test for gopkg.in/yaml.v2@v2 assumes that there are
no future upstream releases. That assumption empirically
does not hold. Backporting fixes to this test is annoying,
and other gopkg.in cases are already reasonably covered,
so remove the problematic test.

Updates #28856

Change-Id: I6455baa1816ac69e02d1ad5d03b82a93e1481a17
Reviewed-on: https://go-review.googlesource.com/c/go/+/205437
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #34822

Change-Id: I189d93ebd3ce6cd1b8f1e29336876fd82a7cfff7
Reviewed-on: https://go-review.googlesource.com/c/go/+/204877
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Recent Xcode versions started to complain about the current min
version:

ld: warning: OS version (6.0.0) too small, changing to 7.0.0

Change-Id: Ieb525dd3e57429fe226b9d30d584b073c5e4768c
Reviewed-on: https://go-review.googlesource.com/c/go/+/204663Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This does not include an upgrade of golang.org/x/net.
This is optional and best done as a separate CL.

Change-Id: Ifecc3fb6e3b7fe026b4ddefbe637186a3445b0bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/204658
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #35347

Change-Id: If7380f29e97a5abe86cdd5e2853323de7997ccfc
Reviewed-on: https://go-review.googlesource.com/c/go/+/205378
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

CL 196959 uses %v to print *EscLocation values. This happens at least at
    Fatalf("path inconsistency: %v != %v", edge.src, src)
in (*Escape).explainPath.

Change-Id: I1c761406af6a1025403dfefa5ec40aee75e72944
Reviewed-on: https://go-review.googlesource.com/c/go/+/205377
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Pick up a dropped error in TestSendMailWithAuth() and simplify goroutine
to use an error channel instead of a sync.WaitGroup and an empty struct
doneCh.

Change-Id: Ie70d0f7c4c85835eb682e81d086ce4d9900269e6
Reviewed-on: https://go-review.googlesource.com/c/go/+/205247
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>