Skip to content

G
go
Switch branch/tag
  1. 21 Jul, 2016 6 commits
    • Chris Broadfoot's avatar
      go1.7rc3 · 8707f31c
      Chris Broadfoot authored 
      Change-Id: Iaef13003979c68926c260c415d6074a50ae137b2
Reviewed-on: https://go-review.googlesource.com/25142
Run-TryBot: Chris Broadfoot <cbro@golang.org>
Reviewed-by: default avatarBrad Fitzpatrick <bradfitz@golang.org>
      8707f31c
    • Chris Broadfoot's avatar
      all: merge master into release-branch.go1.7 · 16a2af03
      Chris Broadfoot authored 
      Change-Id: I2511c3f7583887b641c9b3694aae54789fbc5342
      16a2af03
    • Brad Fitzpatrick's avatar
      misc/trace: disable trace resolution warning · 243d51f0
      Brad Fitzpatrick authored 
      It was removed in upstream Chrome https://codereview.chromium.org/2016863004

Rather than update to the latest version, make the minimal change for Go 1.7 and
change the "showToUser" boolean from true to false.

Tested by hand that it goes away after this change.

Updates #16247

Change-Id: I051f49da878e554b1a34a88e9abc70ab50e18780
Reviewed-on: https://go-review.googlesource.com/25117Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      243d51f0
    • David Chase's avatar
      cmd/compile: change phi location to be optimistic at backedges · 846bc6c5
      David Chase authored 
      This is:

(1) a simple trick that cuts the number of phi-nodes
(temporarily) inserted into the ssa representation by a factor
of 10, and can cut the user time to compile tricky inputs like
gogo/protobuf tests from 13 user minutes to 9.5, and memory
allocation from 3.4GB to 2.4GB.

(2) a fix to sparse lookup, that does not rely on
an assumption proven false by at least one pathological
input "etldlen".

These two changes fix unrelated compiler performance bugs,
both necessary to obtain good performance compiling etldlen.
Without them it takes 20 minutes or longer, with them it
completes in 2 minutes, without a gigantic memory footprint.

Updates #16407

Change-Id: Iaa8aaa8c706858b3d49de1c4865a7fd79e6f4ff7
Reviewed-on: https://go-review.googlesource.com/23136Reviewed-by: default avatarKeith Randall <khr@golang.org>
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
      846bc6c5
    • Keith Randall's avatar
      cmd/compile: move phi args which are constants closer to the phi · 305a0ac1
      Keith Randall authored 
      entry:
   x = MOVQconst [7]
   ...
b1:
   goto b2
b2:
   v = Phi(x, y, z)

Transform that program to:

entry:
   ...
b1:
   x = MOVQconst [7]
   goto b2
b2:
   v = Phi(x, y, z)

This CL moves constant-generating instructions used by a phi to the
appropriate immediate predecessor of the phi's block.

We used to put all constants in the entry block.  Unfortunately, in
large functions we have lots of constants at the start of the
function, all of which are used by lots of phis throughout the
function.  This leads to the constants being live through most of the
function (especially if there is an outer loop).  That's an O(n^2)
problem.

Note that most of the non-phi uses of constants have already been
folded into instructions (ADDQconst, MOVQstoreconst, etc.).

This CL may be generally useful for other instances of compiler
slowness, I'll have to check.  It may cause some programs to run
slower, but probably not by much, as rematerializeable values like
these constants are allocated late (not at their originally scheduled
location) anyway.

This CL is definitely a minimal change that can be considered for 1.7.
We probably want to do a better job in the tighten pass generally, not
just for phi args.  Leaving that for 1.8.

Update #16407

Change-Id: If112a8883b4ef172b2f37dea13e44bda9346c342
Reviewed-on: https://go-review.googlesource.com/25046
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarJosh Bleecher Snyder <josharian@gmail.com>
      305a0ac1
    • Ian Lance Taylor's avatar
      runtime: add explicit `INT $3` at end of Darwin amd64 sigtramp · ff227b8a
      Ian Lance Taylor authored 
      The omission of this instruction could confuse the traceback code if a
SIGPROF occurred during a signal handler.  The traceback code would
trace up to sigtramp, but would then get confused because it would see a
PC address that did not appear to be in the function.

Fixes #16453.

Change-Id: I2b3d53e0b272fb01d9c2cb8add22bad879d3eebc
Reviewed-on: https://go-review.googlesource.com/25104Reviewed-by: default avatarJosh Bleecher Snyder <josharian@gmail.com>
      ff227b8a
  3. 20 Jul, 2016 4 commits
    • Austin Clements's avatar
      runtime: support smaller physical pages than PhysPageSize · f407ca92
      Austin Clements authored 
      Most operations need an upper bound on the physical page size, which
is what sys.PhysPageSize is for (this is checked at runtime init on
Linux). However, a few operations need a *lower* bound on the physical
page size. Introduce a "minPhysPageSize" constant to act as this lower
bound and use it where it makes sense:

1) In addrspace_free, we have to query each page in the given range.
   Currently we increment by the upper bound on the physical page
   size, which means we may skip over pages if the true size is
   smaller. Worse, we currently pass a result buffer that only has
   enough room for one page. If there are actually multiple pages in
   the range passed to mincore, the kernel will overflow this buffer.
   Fix these problems by incrementing by the lower-bound on the
   physical page size and by passing "1" for the length, which the
   kernel will round up to the true physical page size.

2) In the write barrier, the bad pointer check tests for pointers to
   the first physical page, which are presumably small integers
   masquerading as pointers. However, if physical pages are smaller
   than we think, we may have legitimate pointers below
   sys.PhysPageSize. Hence, use minPhysPageSize for this test since
   pointers should never fall below that.

In particular, this applies to ARM64 and MIPS. The runtime is
configured to use 64kB pages on ARM64, but by default Linux uses 4kB
pages. Similarly, the runtime assumes 16kB pages on MIPS, but both 4kB
and 16kB kernel configurations are common. This also applies to ARM on
systems where the runtime is recompiled to deal with a larger page
size. It is also a step toward making the runtime use only a
dynamically-queried page size.

Change-Id: I1fdfd18f6e7cbca170cc100354b9faa22fde8a69
Reviewed-on: https://go-review.googlesource.com/25020Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Reviewed-by: default avatarCherry Zhang <cherryyz@google.com>
Run-TryBot: Austin Clements <austin@google.com>
      f407ca92
    • Dmitry Vyukov's avatar
      runtime/race: fix memory leak · d73ca5f4
      Dmitry Vyukov authored 
      The leak was reported internally on a sever canary that runs for days.
After a day server consumes 5.6GB, after 6 days -- 12.2GB.
The leak is exposed by the added benchmark.
The leak is fixed upstream in :
http://llvm.org/viewvc/llvm-project/compiler-rt/trunk/lib/tsan/rtl/tsan_rtl_thread.cc?view=diff&r1=276102&r2=276103&pathrev=276103

Fixes #16441

Change-Id: I9d4f0adef48ca6cf2cd781b9a6990ad4661ba49b
Reviewed-on: https://go-review.googlesource.com/25091Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
      d73ca5f4
    • Ian Lance Taylor's avatar
      runtime: add as many extra M's as needed · 50048a4e
      Ian Lance Taylor authored 
      When a non-Go thread calls into Go, the runtime needs an M to run the Go
code. The runtime keeps a list of extra M's available. When the last
extra M is allocated, the needextram field is set to tell it to allocate
a new extra M as soon as it is running in Go. This ensures that an extra
M will always be available for the next thread.

However, if many threads need an extra M at the same time, this
serializes them all. One thread will get an extra M with the needextram
field set. All the other threads will see that there is no M available
and will go to sleep. The one thread that succeeded will create a new
extra M. One lucky thread will get it. All the other threads will see
that there is no M available and will go to sleep. The effect is
thundering herd, as all the threads looking for an extra M go through
the process one by one. This seems to have a particularly bad effect on
the FreeBSD scheduler for some reason.

With this change, we track the number of threads waiting for an M, and
create all of them as soon as one thread gets through. This still means
that all the threads will fight for the lock to pick up the next M. But
at least each thread that gets the lock will succeed, instead of going
to sleep only to fight again.

This smooths out the performance greatly on FreeBSD, reducing the
average wall time of `testprogcgo CgoCallbackGC` by 74%.  On GNU/Linux
the average wall time goes down by 9%.

Fixes #13926
Fixes #16396

Change-Id: I6dc42a4156085a7ed4e5334c60b39db8f8ef8fea
Reviewed-on: https://go-review.googlesource.com/25047
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarDmitry Vyukov <dvyukov@google.com>
      50048a4e
    • Brad Fitzpatrick's avatar
      net/smtp: document that the smtp package is frozen · 883e128f
      Brad Fitzpatrick authored 
      This copies the frozen wording from the log/syslog package.

Fixes #16436

Change-Id: If5d478023328925299399f228d8aaf7fb117c1b4
Reviewed-on: https://go-review.googlesource.com/25080Reviewed-by: default avatarIan Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: default avatarAndrew Gerrand <adg@golang.org>
      883e128f
  5. 18 Jul, 2016 8 commits
  7. 17 Jul, 2016 1 commit
  9. 16 Jul, 2016 1 commit
  11. 15 Jul, 2016 1 commit
  13. 14 Jul, 2016 1 commit
  15. 13 Jul, 2016 5 commits
  17. 12 Jul, 2016 4 commits
  19. 11 Jul, 2016 5 commits
  21. 08 Jul, 2016 4 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7