This eliminates the need for syscall/asm.s, which is now empty.

Change-Id: Ied060195e03e9653251f54ea8ef6572444b37fdf
Reviewed-on: https://go-review.googlesource.com/36844Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Extend period of fastrand from (1<<31)-1 to (1<<32)-1 by
choosing other polynom and reacting on high bit before shift.

Polynomial is taken at https://users.ece.cmu.edu/~koopman/lfsr/index.html
from 32.dat.gz . It is referred as F7711115 cause this list of
polynomials is for LFSR with shift to right (and fastrand uses shift to
left). (old polynomial is referred in 31.dat.gz as 7BB88888).

There were couple of places with conversation of fastrand to int, which
leads to negative values on 32bit platforms. They are fixed.

Change-Id: Ibee518a3f9103e0aea220ada494b3aec77babb72
Reviewed-on: https://go-review.googlesource.com/36875
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

I noticed that Content-Length may appear in http.Response.Header, but the docs
say it should be omitted.  Per discussion with bradfitz@, updating the docs to
indicate that the struct fields are authoritative.

Change-Id: Id1807ff9d4ba5de425d8b147205f29b18351230f
Reviewed-on: https://go-review.googlesource.com/36842Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

MOVD{reg,nop} operations (added in CL 36256) inserted to preserve
type information were blocking the load-combining rules. Fix this
by merging type changes into loads wherever possible.

Fixes #19059.

Change-Id: I8a1df06eb0f231b40ae43107d4a3bd0b9c441b59
Reviewed-on: https://go-review.googlesource.com/36843
Run-TryBot: Michael Munday <munday@ca.ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Update #19062.

Change-Id: If6a4c4f8d12e148b162256f13a8ee423f6e30637
Reviewed-on: https://go-review.googlesource.com/36918Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Delete use stub from asm.s, leaving only a dummy file.
Deleting the file causes Windows build to fail.

Fixes #16607

Change-Id: Ic5a55e042e588f1e1bc6605a3d309d1eabdeb288
Reviewed-on: https://go-review.googlesource.com/36716Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

When installing a package to a different directory using `go build`,
`mv` cannot be used if the destination directory has the group sticky
bit set.  Instead, `cp` should be used to make sure the destination
file has the correct permissions.

Fixes golang/go#18878.

Change-Id: I5423f559e7f84df080ed47816e19a22c6d00ab6d
Reviewed-on: https://go-review.googlesource.com/36797
Run-TryBot: Chris Manghane <cmang@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes DragonFly build.

Change-Id: Id6b439cd4023ea8e3ed7cd9b70eec553c9eee4be
Reviewed-on: https://go-review.googlesource.com/36916
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Fixes build on plan9.

Change-Id: Idbb1e6887c24a873de77c92095198847ed953278
Reviewed-on: https://go-review.googlesource.com/36915
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When testing context cancelation behavior do not rely on context
timeouts. Use explicit checks in all such tests. In closeDB
convert the simple check for zero open conns with a wait loop
for zero open conns.

Fixes #19024
Fixes #19041

Change-Id: Iecfcc4467e91249fceb21ffd1f7c62c58140d8e9
Reviewed-on: https://go-review.googlesource.com/36902
Run-TryBot: Daniel Theophanes <kardianos@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

This will make it possible to use the poller with the os package.

This is a lot of code movement but the behavior is intended to be
unchanged.

Update #6817.
Update #7903.
Update #15021.
Update #18507.

Change-Id: I1413685928017c32df5654ded73a2643820977ae
Reviewed-on: https://go-review.googlesource.com/36799
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

CL 33632 reorders args of commutative ops in order to make
CSE for commutative ops more robust.  Unfortunately, that
broke the load-combining rules which depend on a certain ordering
of OR ops' arguments.

Introduce some additional rules that order OR ops' arguments
consistently so that the load-combining rules fire.

Note: there's also something else wrong with the s390x rules.
I've filed #19059 for that.

Fixes #18946

Change-Id: I0a5447196bd88a55ccee683c69a57b943a9972e1
Reviewed-on: https://go-review.googlesource.com/36911
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>

The tutorial ends without mentioning how to use the generated
pprof-like profile with the pprof tool. This may be very trivial
for users who are already very familiar with the Go tools, but
for the newcomers, it saves a lot of time to finalize the tutorial
with an example of `go tool pprof` invocation.

Change-Id: Idf034eb4bfb9672ef10190e66fcbf873e8f08f6a
Reviewed-on: https://go-review.googlesource.com/36803Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>

Change-Id: Iee7daa5b91b7896ce857321e307f2ee47b7f095f
Reviewed-on: https://go-review.googlesource.com/36906
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

When doing i.(T) for non-empty-interface i and concrete type T,
there's no need to read the type out of the itab. Just compare the
itab to the itab we expect for that interface/type pair.

Also optimize type switches by putting the type hash of the
concrete type in the itab. That way we don't need to load the
type pointer out of the itab.

Update #18492

Change-Id: I49e280a21e5687e771db5b8a56b685291ac168ce
Reviewed-on: https://go-review.googlesource.com/34810
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>

Added missing nil-check. We will get rid of the gcCompat corrections
shortly but it's still worthwhile having the new test case added.

Fixes #19056.

Change-Id: I35bd938a4d789058da15724e34c05e5e631ecad0
Reviewed-on: https://go-review.googlesource.com/36908
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Based on sample code from iant.

Fixes #18788.

Change-Id: I6bb33ed05af2538fbde42ddcac629280ef7c00a6
Reviewed-on: https://go-review.googlesource.com/36892
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

bytes.Equal is written in assembly and is slightly faster than the
current Go bytesEqual from the net package.

benchcmp:
benchmark                 old ns/op     new ns/op     delta
BenchmarkIPCompare4-8     7.74          7.01          -9.43%
BenchmarkIPCompare6-8     8.47          6.86          -19.01%

Change-Id: I2a7ad35867489b46f0943aef5776a2fe1b46e2df
Reviewed-on: https://go-review.googlesource.com/36850Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

For #10424.

Change-Id: Ie4e87503b0ed04f65d2444652bd1db647d3529f4
Reviewed-on: https://go-review.googlesource.com/36851Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

If there are many goroutines contending for two different locks
and both locks hash to the same semaRoot, the scans to find the
goroutines for a particular lock can end up being O(n), making
n lock acquisitions quadratic.

As long as only one actively-used lock hashes to each semaRoot
there's no problem, since the list operations in that case are O(1).
But when the second actively-used lock hits the same semaRoot,
then scans for entries with for a given lock have to scan over the
entries for the other lock.

Fix this problem by changing the semaRoot to hold only one sudog
per unique address. In the running example, this drops the length of
that list from O(n) to 2. Then attach other goroutines waiting on the
same address to a separate list headed by the sudog in the semaRoot list.
Those "same address list" operations are still O(1), so now the
example from above works much better.

There is still an assumption here that in real programs you don't have
many many goroutines queueing up on many many distinct addresses.
If we end up with that problem, we can replace the top-level list with
a treap.

Fixes #17953.

Change-Id: I78c5b1a5053845275ab31686038aa4f6db5720b2
Reviewed-on: https://go-review.googlesource.com/36792
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change allows greatly reducing memory allocations with a slightly
performance improvement as well.

Instances of (*png).Encoder can have a optional BufferPool attached to
them. This allows reusing temporary buffers used when encoding a new
image. This buffers include instances to zlib.Writer and bufio.Writer.

Also, buffers for current and previous rows are saved in the encoder
instance and reused as long as their cap() is enough to fit the current
image row.

A new benchmark was added to demonstrate the performance improvement
when setting a BufferPool to an Encoder instance:

$ go test -bench BenchmarkEncodeGray -benchmem
BenchmarkEncodeGray-4                 	    1000	   2349584 ns/op	 130.75 MB/s	  852230 B/op	      32 allocs/op
BenchmarkEncodeGrayWithBufferPool-4   	    1000	   2241650 ns/op	 137.04 MB/s	     900 B/op	       3 allocs/op

Change-Id: I4488201ae53cb2ad010c68c1e0118ee12beae14e
Reviewed-on: https://go-review.googlesource.com/34150Reviewed-by: Nigel Tao <nigeltao@golang.org>
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Make the comments a bit clearer and more accurate,
in anticipation of updating the code.

Change-Id: I1111e6c3405a8688fcd29b809a48a762ff41edaa
Reviewed-on: https://go-review.googlesource.com/36833Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

When code defines a method on T,
the compiler generates a corresponding wrapper method on *T.
The first thing the wrapper does is check whether
the pointer is nil and if so, call panicwrap.
This is done to provide a useful error message.

The existing implementation gets its information
from arguments set up by the compiler.
However, with some trouble, this information can
be extracted from the name of the wrapper method itself.

Removing the arguments to panicwrap simplifies and
shrinks the wrapper method.
It also means that the call to panicwrap does not
require any stack space.
This enables a further optimization on amd64/x86,
which is to skip the function prologue if nothing
else in the method requires stack space.
This is frequently the case in simple, hot methods,
such as Less and Swap in sort.Interface implementations.

Fixes #19040.

Benchmarks for package sort on amd64:

name                  old time/op  new time/op  delta
SearchWrappers-8       104ns ± 1%   104ns ± 1%    ~     (p=0.286 n=27+27)
SortString1K-8         128µs ± 1%   128µs ± 1%  -0.44%  (p=0.004 n=30+30)
SortString1K_Slice-8   118µs ± 2%   117µs ± 1%    ~     (p=0.106 n=30+30)
StableString1K-8      18.6µs ± 1%  18.6µs ± 1%    ~     (p=0.446 n=28+26)
SortInt1K-8           65.9µs ± 1%  60.7µs ± 1%  -7.96%  (p=0.000 n=28+30)
StableInt1K-8         75.3µs ± 2%  72.8µs ± 1%  -3.41%  (p=0.000 n=30+30)
StableInt1K_Slice-8   57.7µs ± 1%  57.7µs ± 1%    ~     (p=0.515 n=30+30)
SortInt64K-8          6.28ms ± 1%  6.01ms ± 1%  -4.19%  (p=0.000 n=28+28)
SortInt64K_Slice-8    5.04ms ± 1%  5.04ms ± 1%    ~     (p=0.927 n=28+27)
StableInt64K-8        6.65ms ± 1%  6.38ms ± 1%  -3.97%  (p=0.000 n=26+30)
Sort1e2-8             37.9µs ± 1%  37.2µs ± 1%  -1.89%  (p=0.000 n=29+27)
Stable1e2-8           77.0µs ± 1%  74.7µs ± 1%  -3.06%  (p=0.000 n=27+30)
Sort1e4-8             8.21ms ± 2%  7.98ms ± 1%  -2.77%  (p=0.000 n=29+30)
Stable1e4-8           24.8ms ± 1%  24.3ms ± 1%  -2.31%  (p=0.000 n=28+30)
Sort1e6-8              1.27s ± 4%   1.22s ± 1%  -3.42%  (p=0.000 n=30+29)
Stable1e6-8            5.06s ± 1%   4.92s ± 1%  -2.77%  (p=0.000 n=25+29)
[Geo mean]             731µs        714µs       -2.29%

Before/after assembly for sort.(*intPairs).Less follows.
It can be optimized further, but that's for a follow-up CL.

Before:

"".(*intPairs).Less t=1 size=214 args=0x20 locals=0x38
	0x0000 00000 (<autogenerated>:1)	TEXT	"".(*intPairs).Less(SB), $56-32
	0x0000 00000 (<autogenerated>:1)	MOVQ	(TLS), CX
	0x0009 00009 (<autogenerated>:1)	CMPQ	SP, 16(CX)
	0x000d 00013 (<autogenerated>:1)	JLS	204
	0x0013 00019 (<autogenerated>:1)	SUBQ	$56, SP
	0x0017 00023 (<autogenerated>:1)	MOVQ	BP, 48(SP)
	0x001c 00028 (<autogenerated>:1)	LEAQ	48(SP), BP
	0x0021 00033 (<autogenerated>:1)	MOVQ	32(CX), BX
	0x0025 00037 (<autogenerated>:1)	TESTQ	BX, BX
	0x0028 00040 (<autogenerated>:1)	JEQ	55
	0x002a 00042 (<autogenerated>:1)	LEAQ	64(SP), DI
	0x002f 00047 (<autogenerated>:1)	CMPQ	(BX), DI
	0x0032 00050 (<autogenerated>:1)	JNE	55
	0x0034 00052 (<autogenerated>:1)	MOVQ	SP, (BX)
	0x0037 00055 (<autogenerated>:1)	NOP
	0x0037 00055 (<autogenerated>:1)	FUNCDATA	$0, gclocals·4032f753396f2012ad1784f398b170f4(SB)
	0x0037 00055 (<autogenerated>:1)	FUNCDATA	$1, gclocals·69c1753bd5f81501d95132d08af04464(SB)
	0x0037 00055 (<autogenerated>:1)	MOVQ	""..this+64(FP), AX
	0x003c 00060 (<autogenerated>:1)	TESTQ	AX, AX
	0x003f 00063 (<autogenerated>:1)	JEQ	$0, 135
	0x0041 00065 (<autogenerated>:1)	MOVQ	(AX), CX
	0x0044 00068 (<autogenerated>:1)	MOVQ	8(AX), AX
	0x0048 00072 (<autogenerated>:1)	MOVQ	"".i+72(FP), DX
	0x004d 00077 (<autogenerated>:1)	CMPQ	DX, AX
	0x0050 00080 (<autogenerated>:1)	JCC	$0, 128
	0x0052 00082 (<autogenerated>:1)	SHLQ	$4, DX
	0x0056 00086 (<autogenerated>:1)	MOVQ	(CX)(DX*1), DX
	0x005a 00090 (<autogenerated>:1)	MOVQ	"".j+80(FP), BX
	0x005f 00095 (<autogenerated>:1)	CMPQ	BX, AX
	0x0062 00098 (<autogenerated>:1)	JCC	$0, 128
	0x0064 00100 (<autogenerated>:1)	SHLQ	$4, BX
	0x0068 00104 (<autogenerated>:1)	MOVQ	(CX)(BX*1), AX
	0x006c 00108 (<autogenerated>:1)	CMPQ	DX, AX
	0x006f 00111 (<autogenerated>:1)	SETLT	AL
	0x0072 00114 (<autogenerated>:1)	MOVB	AL, "".~r2+88(FP)
	0x0076 00118 (<autogenerated>:1)	MOVQ	48(SP), BP
	0x007b 00123 (<autogenerated>:1)	ADDQ	$56, SP
	0x007f 00127 (<autogenerated>:1)	RET
	0x0080 00128 (<autogenerated>:1)	PCDATA	$0, $1
	0x0080 00128 (<autogenerated>:1)	CALL	runtime.panicindex(SB)
	0x0085 00133 (<autogenerated>:1)	UNDEF
	0x0087 00135 (<autogenerated>:1)	LEAQ	go.string."sort_test"(SB), AX
	0x008e 00142 (<autogenerated>:1)	MOVQ	AX, (SP)
	0x0092 00146 (<autogenerated>:1)	MOVQ	$9, 8(SP)
	0x009b 00155 (<autogenerated>:1)	LEAQ	go.string."intPairs"(SB), AX
	0x00a2 00162 (<autogenerated>:1)	MOVQ	AX, 16(SP)
	0x00a7 00167 (<autogenerated>:1)	MOVQ	$8, 24(SP)
	0x00b0 00176 (<autogenerated>:1)	LEAQ	go.string."Less"(SB), AX
	0x00b7 00183 (<autogenerated>:1)	MOVQ	AX, 32(SP)
	0x00bc 00188 (<autogenerated>:1)	MOVQ	$4, 40(SP)
	0x00c5 00197 (<autogenerated>:1)	PCDATA	$0, $1
	0x00c5 00197 (<autogenerated>:1)	CALL	runtime.panicwrap(SB)
	0x00ca 00202 (<autogenerated>:1)	UNDEF
	0x00cc 00204 (<autogenerated>:1)	NOP
	0x00cc 00204 (<autogenerated>:1)	PCDATA	$0, $-1
	0x00cc 00204 (<autogenerated>:1)	CALL	runtime.morestack_noctxt(SB)
	0x00d1 00209 (<autogenerated>:1)	JMP	0

After:

"".(*intPairs).Swap t=1 size=147 args=0x18 locals=0x8
	0x0000 00000 (<autogenerated>:1)	TEXT	"".(*intPairs).Swap(SB), $8-24
	0x0000 00000 (<autogenerated>:1)	MOVQ	(TLS), CX
	0x0009 00009 (<autogenerated>:1)	SUBQ	$8, SP
	0x000d 00013 (<autogenerated>:1)	MOVQ	BP, (SP)
	0x0011 00017 (<autogenerated>:1)	LEAQ	(SP), BP
	0x0015 00021 (<autogenerated>:1)	MOVQ	32(CX), BX
	0x0019 00025 (<autogenerated>:1)	TESTQ	BX, BX
	0x001c 00028 (<autogenerated>:1)	JEQ	43
	0x001e 00030 (<autogenerated>:1)	LEAQ	16(SP), DI
	0x0023 00035 (<autogenerated>:1)	CMPQ	(BX), DI
	0x0026 00038 (<autogenerated>:1)	JNE	43
	0x0028 00040 (<autogenerated>:1)	MOVQ	SP, (BX)
	0x002b 00043 (<autogenerated>:1)	NOP
	0x002b 00043 (<autogenerated>:1)	FUNCDATA	$0, gclocals·e6397a44f8e1b6e77d0f200b4fba5269(SB)
	0x002b 00043 (<autogenerated>:1)	FUNCDATA	$1, gclocals·69c1753bd5f81501d95132d08af04464(SB)
	0x002b 00043 (<autogenerated>:1)	MOVQ	""..this+16(FP), AX
	0x0030 00048 (<autogenerated>:1)	TESTQ	AX, AX
	0x0033 00051 (<autogenerated>:1)	JEQ	$0, 140
	0x0035 00053 (<autogenerated>:1)	MOVQ	(AX), CX
	0x0038 00056 (<autogenerated>:1)	MOVQ	8(AX), AX
	0x003c 00060 (<autogenerated>:1)	MOVQ	"".i+24(FP), DX
	0x0041 00065 (<autogenerated>:1)	CMPQ	DX, AX
	0x0044 00068 (<autogenerated>:1)	JCC	$0, 133
	0x0046 00070 (<autogenerated>:1)	SHLQ	$4, DX
	0x004a 00074 (<autogenerated>:1)	MOVQ	8(CX)(DX*1), BX
	0x004f 00079 (<autogenerated>:1)	MOVQ	(CX)(DX*1), SI
	0x0053 00083 (<autogenerated>:1)	MOVQ	"".j+32(FP), DI
	0x0058 00088 (<autogenerated>:1)	CMPQ	DI, AX
	0x005b 00091 (<autogenerated>:1)	JCC	$0, 133
	0x005d 00093 (<autogenerated>:1)	SHLQ	$4, DI
	0x0061 00097 (<autogenerated>:1)	MOVQ	8(CX)(DI*1), AX
	0x0066 00102 (<autogenerated>:1)	MOVQ	(CX)(DI*1), R8
	0x006a 00106 (<autogenerated>:1)	MOVQ	R8, (CX)(DX*1)
	0x006e 00110 (<autogenerated>:1)	MOVQ	AX, 8(CX)(DX*1)
	0x0073 00115 (<autogenerated>:1)	MOVQ	SI, (CX)(DI*1)
	0x0077 00119 (<autogenerated>:1)	MOVQ	BX, 8(CX)(DI*1)
	0x007c 00124 (<autogenerated>:1)	MOVQ	(SP), BP
	0x0080 00128 (<autogenerated>:1)	ADDQ	$8, SP
	0x0084 00132 (<autogenerated>:1)	RET
	0x0085 00133 (<autogenerated>:1)	PCDATA	$0, $1
	0x0085 00133 (<autogenerated>:1)	CALL	runtime.panicindex(SB)
	0x008a 00138 (<autogenerated>:1)	UNDEF
	0x008c 00140 (<autogenerated>:1)	PCDATA	$0, $1
	0x008c 00140 (<autogenerated>:1)	CALL	runtime.panicwrap(SB)
	0x0091 00145 (<autogenerated>:1)	UNDEF

Change-Id: I15bb8435f0690badb868799f313ed8817335efd3
Reviewed-on: https://go-review.googlesource.com/36809
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Follow-up to CL 36791.

Change-Id: I1c4831e5dfe90c205782e970ada7faff8a009daa
Reviewed-on: https://go-review.googlesource.com/36890Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Add temporaries to reorder the assignment for OAS2XXX nodes.
This makes orderstmt(), rewrite
  a, b, c = ...
as
  tmp1, tmp2, tmp3 = ...
  a, b, c = tmp1, tmp2, tmp3
and
  a, ok = ...
as
  t1, t2 = ...
  a  = t1
  ok = t2

Fixes #13433.

Change-Id: Id0f5956e3a254d0a6f4b89b5f7b0e055b1f0e21f
Reviewed-on: https://go-review.googlesource.com/34713
Run-TryBot: Dhananjay Nakrani <dhananjayn@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Encourage people towards the various help forums as a first port of
call. Better sign-posting will reduce the incidence or questions being
asked in the issue tracker that should otherwise be handled elsewhere,
thereby keeping the issue tracker email traffic more focussed.

Change-Id: I13b2e498d88be010fca421067ae6fb579a46d6b7
Reviewed-on: https://go-review.googlesource.com/34250Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Using 'sep' as parameter name for strings functions that take a
separator argument is fine, but for functions like Index or Count that
look for a substring it's better to use 'substr' (like Contains
already does).

Fixes #19039

Change-Id: Idd557409c8fea64ce830ab0e3fec37d3d56a79f0
Reviewed-on: https://go-review.googlesource.com/36874
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The environment variables used in those tests override the default
OS ones. However, one of them (SystemRoot) seems to be required on
some Windows systems for invoking cmd.exe properly.

This fixes #4930 and #6568.

Change-Id: I23dfb67c1de86020711a3b59513f6adcbba12561
Reviewed-on: https://go-review.googlesource.com/36873Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: Ia2852666ef44e7ef0bba2360e92caccc83fd0e5c
Reviewed-on: https://go-review.googlesource.com/36796Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When running benchmarks with -cpuprofile,
the entire process gets profiled,
and ReadMemStats is surprisingly expensive.
Running the sort benchmarks right now with
-cpuprofile shows almost half of all execution
time in ReadMemStats.

Since ReadMemStats is not required if the benchmark
does not need allocation stats, simply skip it.
This will make cpu profiles nicer to read
and significantly speed up the process of running benchmarks.
It might also make sense to toggle cpu profiling
on/off as we begin/end individual benchmarks,
but that wouldn't get us the time savings of
skipping ReadMemStats, so this CL is useful in itself.

Change-Id: I425197b1ee11be4bc91d22b929e2caf648ebd7c5
Reviewed-on: https://go-review.googlesource.com/36791
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

The 0x10101 magic constant is a little more principled than 0x10100, as
the rounding adjustment now spans the complete range [0, 0xffff] instead
of [0, 0xff00].

Consider this round-tripping code:

y, cb, cr := color.RGBToYCbCr(r0, g0, b0)
r1, g1, b1 := color.YCbCrToRGB(y, cb, cr)

Due to rounding errors both ways, we often but not always get a perfect
round trip (where r0 == r1 && g0 == g1 && b0 == b1). This is true both
before and after this commit. In some cases we got luckier, in others we
got unluckier.

For example, before this commit, (180, 135, 164) doesn't round trip
perfectly (it's off by 1) but (180, 135, 165) does. After this commit,
both cases are reversed: the former does and the latter doesn't (again
off by 1). Over all possible (r, g, b) triples, there doesn't seem to be
a big change for better or worse.

There is some history in these CLs:

image/color: tweak the YCbCr to RGBA conversion formula.
https://go-review.googlesource.com/#/c/12220/2/src/image/color/ycbcr.go

image/color: have YCbCr.RGBA work in 16-bit color, per the Color
interface.
https://go-review.googlesource.com/#/c/8073/2/src/image/color/ycbcr.go

Change-Id: Ib25ba7039f49feab2a9d1a4141b86db17db7b3e1
Reviewed-on: https://go-review.googlesource.com/36732
Run-TryBot: Nigel Tao <nigeltao@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>

Instead we can just call needwritebarrier when constructing the SSA
representation.

Change-Id: I6fefaad49daada9cdb3050f112889e49dca0047b
Reviewed-on: https://go-review.googlesource.com/34566Reviewed-by: Cherry Zhang <cherryyz@google.com>

Fixes #18975.

Change-Id: I60dfb299233ecfed4b2da93750ea84e7921f1fbb
Reviewed-on: https://go-review.googlesource.com/36482
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

bradfitz noted in change 36717 that the new behavior was no longer
comparable with the old.  This change restores comparable behavior
for -cpu=1.

BenchmarkMapAddSame                 909           909           +0.00%
BenchmarkMapAddSame-6               1309          262           -79.98%
BenchmarkMapAddDifferent            2856          3030          +6.09%
BenchmarkMapAddDifferent-6          3803          581           -84.72%

updates #18177

Change-Id: Ifaff5a1f48be92002d86c296220313b7efdc81d6
Reviewed-on: https://go-review.googlesource.com/36723Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The existing implementation uses v1.0 of Bitbucket's REST API. The newer
version 2.0 of Bitbucket's REST API provides the same information but
with support for partial responses allowing the client to request only
the response fields that are relevant to their usage of the API
resulting in a much smaller payload size.

The partial response functionality in the Bitbucket API is documented here:
https://developer.atlassian.com/bitbucket/api/2/reference/meta/partial-response

The v2.0 of the Bitbucket repositories API is documented here:
https://developer.atlassian.com/bitbucket/api/2/reference/resource/repositories/%7Busername%7D/%7Brepo_slug%7D#get

Fixes #18919

Change-Id: I319947d5c51adc241cfe3a2228a667cc43fb1f56
Reviewed-on: https://go-review.googlesource.com/36219
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ieb0808caa24c9a5e599084183ba5ee8a6536f7d8
Reviewed-on: https://go-review.googlesource.com/36622Reviewed-by: Robert Griesemer <gri@golang.org>

So it could be inlined.

Using bit-tricks it could be implemented without condition
(improved trick version by Minux Ma).

Simple benchmark shows it is faster on i386 and x86_64, though
I don't know will it be faster on other architectures?

benchmark                       old ns/op     new ns/op     delta
BenchmarkFastrand-3             2.79          1.48          -46.95%
BenchmarkFastrandHashiter-3     25.9          24.9          -3.86%

Change-Id: Ie2eb6d0f598c0bb5fac7f6ad0f8b5e3eddaa361b
Reviewed-on: https://go-review.googlesource.com/34782Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

If the user is calling SetGCPercent(-1), they intend to disable GC.
They probably don't intend to run one. If they do, they can call
runtime.GC themselves.

Change-Id: I40ef40dfc7e15193df9ff26159cd30e56b666f73
Reviewed-on: https://go-review.googlesource.com/34013
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>

During the mark phase of garbage collection, goroutines that allocate
may be recruited to assist. This change creates trace events for mark
assists and displays them similarly to sweep assists in the trace
viewer.

Mark assists are different than sweeps in that they can be preempted, so
displaying them in the trace viewer is a little tricky -- we may need to
synthesize multiple slices for one mark assist. This could have been
done in the parser instead, but I thought it might be preferable to keep
the parser as true to the event stream as possible.

Change-Id: I381dcb1027a187a354b1858537851fa68a620ea7
Reviewed-on: https://go-review.googlesource.com/36015
Run-TryBot: Heschi Kreinick <heschi@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Hyang-Ah Hana Kim <hyangah@gmail.com>

Change-Id: Ib2109ab773fbf2a35188300cf91a54735f75fc7c
Reviewed-on: https://go-review.googlesource.com/36736Reviewed-by: Matthew Dempsky <mdempsky@google.com>