This reverts commit ab096d58.

Change-Id: Icf366aa43acc41b4f8474edae0297e554368bf14
Reviewed-on: https://go-review.googlesource.com/18321Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #13725.

Change-Id: I5fe46851b238fc9ab301da8f8fc37bd1b7871748
Reviewed-on: https://go-review.googlesource.com/18316Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Do not check DaylightName if DynamicDaylightTimeDisabled is false.

Fixes #13502

Change-Id: I03e01ec0afdeb0037a5d3ee243674e5a6b559da5
Reviewed-on: https://go-review.googlesource.com/17998Reviewed-by: Yasuhiro MATSUMOTO <mattn.jp@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>

Simply checking the exit code of `git rev-parse --git-dir` should
suffice here, but that requires deviating from the infrastructure
provided by `run`, so I've left that for a future change.

Fixes #11211.

Change-Id: I7cbad86a8a06578f52f66f734f5447b597ddc962
Reviewed-on: https://go-review.googlesource.com/18213Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #13821.

Change-Id: I4a28a92d137edac3061537af25ac9d7aba411a66
Reviewed-on: https://go-review.googlesource.com/18262Reviewed-by: Russ Cox <rsc@golang.org>

Since Stop was introduced, it would revert to the system default for the
signal, rather than to the default Go behavior.  Change it to revert to
the default Go behavior.

Change-Id: I345467ece0e49e31b2806d6fce2f1937b17905a6
Reviewed-on: https://go-review.googlesource.com/18229Reviewed-by: Russ Cox <rsc@golang.org>

Mention that:
- connection pooling is enabled by default,
- the Transport is safe for concurrent use, and
- the Client type should be used for high-level stuff.

Change-Id: Idfd8cc852e733c44211e77cf0e22720b1fdca39b
Reviewed-on: https://go-review.googlesource.com/18273Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #13833

Change-Id: If0bd5f7dcfc39d34680d11eb998050f0900d5a26
Reviewed-on: https://go-review.googlesource.com/18283Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Update net/http's copy of http2 (sync as of x/net git rev 961116aee,
aka https://golang.org/cl/18266)

Also adds some CONNECT tests for #13717 (mostly a copy of http2's
version of test, but in the main repo it also tests that http1 behaves
the same)

Fixes #13668
Fixes #13717

Change-Id: I7db93fe0b7c42bd17a43ef32953f2d20620dd3ea
Reviewed-on: https://go-review.googlesource.com/18269
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Also reference the new Transport.ExpectContinueTimeout after the
mention of 100-continue.

Fixes #13721

Change-Id: I3445c011ed20f29128092c801c7a4bb4dd2b8351
Reviewed-on: https://go-review.googlesource.com/18281Reviewed-by: Andrew Gerrand <adg@golang.org>

Update #11845.

Change-Id: I1c248dc48abc62e51836b9ba50d6deb89706c730
Reviewed-on: https://go-review.googlesource.com/18226Reviewed-by: Russ Cox <rsc@golang.org>

Avoids an msan error when runtime/cgo is explicitly rebuilt with
-fsanitize=memory.

Fixes #13815.

Change-Id: I70308034011fb308b63585bcd40b0d1e62ec93ef
Reviewed-on: https://go-review.googlesource.com/18263Reviewed-by: Russ Cox <rsc@golang.org>

Thanks to Kevin Kirsche (github kkirsche).

Change-Id: Ia0017371f56065a5e88d1ebb800a6489136ee9b1
Reviewed-on: https://go-review.googlesource.com/18280Reviewed-by: Andrew Gerrand <adg@golang.org>

SEC-1 says: “The component privateKey is the private key defined to be
the octet string of length ⌊log₂(n)/8⌋ (where n is the order of the
curve)”.

Previously the code for parsing ECC private keys would panic (on
non-amd64) when the private was too long. It would also pass a too-short
private key to crypto/elliptic, possibly resulting in undesirable
behaviour.

This change makes the parsing function handle both too much and too
little padding because GnuTLS does the former and OpenSSL did the latter
until 30cd4ff294252c4b6a4b69cbef6a5b4117705d22. It also causes
serialisation to pad private keys correctly.

Fixes #13699

Change-Id: If9c2faeaeb45af8a4d7770d784f3d2633e7f8290
Reviewed-on: https://go-review.googlesource.com/18094
Run-TryBot: Adam Langley <agl@golang.org>
Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Also add relevant test.

Fixes #13343.

Change-Id: Ib1e65af1d643d501de89adee3618eddbf6c69c9e
Reviewed-on: https://go-review.googlesource.com/18159Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Change-Id: I45b026f4b4bf23b222a81669280cbe245048022b
Reviewed-on: https://go-review.googlesource.com/18212Reviewed-by: Russ Cox <rsc@golang.org>

Before golang.org/cl/13921, "go install -buildmode=shared prefix/..." created a
file called "libprefix.so", which was obviously a problem when prefix was
something like "." or "../".  However, now it expands the ... into all the
matched packages, joins them with -, which can clearly be a very long name
indeed. Because I plan to build shared libraries for Ubuntu by running commands
exactly like "go install -buildmode=shared prefix/...", this special cases this
to produce the old behaviour (but de-relativises prefix first).

Fixes #13714

Change-Id: I4fd8d4934279f9a18cc70a13e4ef3e23f6abcb6e
Reviewed-on: https://go-review.googlesource.com/18114Reviewed-by: Ian Lance Taylor <iant@golang.org>

parseBase128Int compares |shifted| with four, seemingly to ensure the result
fits in an int32 on 32-bit platforms where int is 32-bit. However, there is an
off-by-one in this logic, so it actually allows five shifts, making the maximum
tag number or OID component 2^35-1.

Fix this so the maximum is 2^28-1 which should be plenty for OID components and
tag numbers while not overflowing on 32-bit platforms.

Change-Id: If825b30cc53a0fc08e68ea1a24d265e7eb1a13a4
Reviewed-on: https://go-review.googlesource.com/18225Reviewed-by: Adam Langley <agl@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

These are the easy, automated cases. There were some more where we
need to fight Gerrit and the CLA system to extract the appropriate
metadata.

Updates #12042

Change-Id: Id63ae635ee7efeec4cd372c7d85bb5b1f557951b
Reviewed-on: https://go-review.googlesource.com/18264Reviewed-by: Ian Lance Taylor <iant@golang.org>

Try to reduce feature request bug reports.

Change-Id: I713bb715d25d23e084b054aea8e1c3197dde90d4
Reviewed-on: https://go-review.googlesource.com/18222Reviewed-by: Ian Lance Taylor <iant@golang.org>

In the beginning, there was no way to cancel an HTTP request.

We later added Transport.CancelRequest to cancel an in-flight HTTP
request by breaking its underlying TCP connection, but it was hard to
use correctly and didn't work in all cases. And its error messages
were terrible. Some of those issues were fixed over time, but the most
unfixable problem was that it didn't compose well. All RoundTripper
implementations had to choose to whether to implement CancelRequest
and both decisions had negative consequences.

In Go 1.5 we added Request.Cancel, which composed well, worked in all
phases, had nice error messages, etc. But we forgot to use it in the
implementation of Client.Timeout (a timeout which spans multiple
requests and reading request bodies).

In Go 1.6 (upcoming), we added HTTP/2 support, but now Client.Timeout
didn't work because the http2.Transport didn't have a CancelRequest
method.

Rather than add a CancelRequest method to http2, officially deprecate
it and update the only caller (Client, for Client.Cancel) to use
Request.Cancel instead.

The http2 Client timeout tests are enabled now.

For compatibility, we still use CancelRequest in Client if we don't
recognize the RoundTripper type. But documentation has been updated to
tell people that CancelRequest is deprecated.

Fixes #13540

Change-Id: I15546b90825bb8b54905e17563eca55ea2642075
Reviewed-on: https://go-review.googlesource.com/18260Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Slightly rephrased sentence to emphasize the contents of the
Unicode categories w/o repeating the full category name each
time.

Fixes #13414.

Change-Id: Icd32ff1547fa81e866c5937a631c3344bb6087c6
Reviewed-on: https://go-review.googlesource.com/18265Reviewed-by: Rob Pike <r@golang.org>

In debugging the flaky test in #13825, I discovered that my previous
change to tighten and simplify the communication protocol between
Transport.roundTrip and persistConn.readLoop in
https://golang.org/cl/17890 wasn't complete.

This change simplifies it further: the buffered-vs-unbuffered
complexity goes away, and we no longer need to re-try channel reads in
the select case. It was trying to prioritize channels in the case that
two were readable in the select. (it was only failing in the race builder
because the race builds randomize select scheduling)

The problem was that in the bodyless response case we had to return
the idle connection before replying to roundTrip. But putIdleConn
previously both added it to the free list (which we wanted), but also
closed the connection, which made the caller goroutine
(Transport.roundTrip) have two readable cases: pc.closech, and the
response. We guarded against similar conditions in the caller's select
for two readable channels, but such a fix wasn't possible here, and would
be overly complicated.

Instead, switch to unbuffered channels. The unbuffered channels were only
to prevent goroutine leaks, so address that differently: add a "callerGone"
channel closed by the caller on exit, and select on that during any unbuffered
sends.

As part of the fix, split putIdleConn into two halves: a part that
just returns to the freelist, and a part that also closes. Update the
four callers to the variants each wanted.

Incidentally, the connections were closing on return to the pool due
to MaxIdleConnsPerHost (somewhat related: #13801), but this bug
could've manifested for plenty of other reasons.

Fixes #13825

Change-Id: I6fa7136e2c52909d57a22ea4b74d0155fdf0e6fa
Reviewed-on: https://go-review.googlesource.com/18282
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>

This test triggers a large number of usleep(100)s. linux/arm, openbsd,
and solaris have very poor timer resolution on the builders, so
usleep(100) actually gives up the whole scheduling quantum. On Linux
and OpenBSD (and probably Solaris), profiling signals are only
generated when a process completes a whole scheduling quantum, so this
test often gets zero profiling signals and fails.

Until we figure out what to do about this, skip this test on these
platforms.

Updates #13405.

Change-Id: Ica94e4a8ae7a8df3e5a840504f83ee2ec08727df
Reviewed-on: https://go-review.googlesource.com/18252Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Austin Clements <austin@google.com>

Previously, when a program died because of a SIGHUP, SIGINT, or SIGTERM
signal it would exit with status 2.  This CL fixes the runtime to exit
with a status indicating that the program was killed by a signal.

Change-Id: Ic2982a2562857edfdccaf68856e0e4df532af136
Reviewed-on: https://go-review.googlesource.com/18156Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>

Use the current ability to say that we don't do anything with SIGCONT by
default, but programs can catch it using signal.Notify if they want.

Fixes #8953.

Change-Id: I67d40ce36a029cbc58a235cbe957335f4a58e1c5
Reviewed-on: https://go-review.googlesource.com/18185Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Added a format option to inhibit output of .Note field in
printing, and enabled that option during export.
Added test.

Fixes #13777.

Change-Id: I739f9785eb040f2fecbeb96d5a9ceb8c1ca0f772
Reviewed-on: https://go-review.googlesource.com/18217Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>

For #10571.

Change-Id: I9a42226078b9c52dbe0c65cb101b5f452233e911
Reviewed-on: https://go-review.googlesource.com/18205Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

For #13789.

Change-Id: I83973298a35afcf55627f0a72223098306a51f4b
Reviewed-on: https://go-review.googlesource.com/18233Reviewed-by: Ian Lance Taylor <iant@golang.org>

When 'go tool dist test' stops, it was intended that it first wait for
pending background tests, like a failed compilation waits for pending
background compiles. But these three lines prevented that.
Fix by deleting them. (The actual loop already contains the correct
logic to avoid running the others and to wait for what's left.)

Change-Id: I4e945495ada903fb0af567910626241bc1c52ba6
Reviewed-on: https://go-review.googlesource.com/18232Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The CloseNotifier implementation and documentation was
substantially changed in https://golang.org/cl/17750 but it was a bit
too aggressive.

Issue #13666 highlighted that in addition to breaking external
projects, even the standard library (httputil.ReverseProxy) didn't
obey the new rules about not using CloseNotifier until the
Request.Body is fully consumed.

So, instead of fixing httputil.ReverseProxy, dial back the rules a
bit. It's now okay to call CloseNotify before consuming the request
body. The docs now say CloseNotifier may wait to fire before the
request body is fully consumed, but doesn't say that the behavior is
undefined anymore. Instead, we just wait until the request body is
consumed and start watching for EOF from the client then.

This CL also adds a test to ReverseProxy (using a POST request) that
would've caught this earlier.

Fixes #13666

Change-Id: Ib4e8c29c4bfbe7511f591cf9ffcda23a0f0b1269
Reviewed-on: https://go-review.googlesource.com/18144Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #13346.

Change-Id: Ic903ee90575e8dbe23905d0678d3295745d1d47f
Reviewed-on: https://go-review.googlesource.com/18154
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: Ia8c1c77590115a5ffda144962436d489ed77a423
Reviewed-on: https://go-review.googlesource.com/18227Reviewed-by: Ian Lance Taylor <iant@golang.org>

Old behavior: 10 consecutive EPIPE errors on any descriptor cause the
program to exit with a SIGPIPE signal.

New behavior: an EPIPE error on file descriptors 1 or 2 cause the
program to raise a SIGPIPE signal.  If os/signal.Notify was not used to
catch SIGPIPE signals, this will cause the program to exit with SIGPIPE.
An EPIPE error on a file descriptor other than 1 or 2 will simply be
returned from Write.

Fixes #11845.
Update #9896.

Change-Id: Ic85d77e386a8bb0255dc4be1e4b3f55875d10f18
Reviewed-on: https://go-review.googlesource.com/18151Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #13034.
Fixes #13042.
Update #9896.

Change-Id: I189f381090223dd07086848aac2d69d2c00d80c4
Reviewed-on: https://go-review.googlesource.com/18062Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I2b61f3b3ecf28d8f6a8dff94d194b6d3d450ea22
Reviewed-on: https://go-review.googlesource.com/17996Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Change-Id: I155633b58e1823344a26c3edf11f5626fae080ee
Reviewed-on: https://go-review.googlesource.com/18204Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

For #10571.

Change-Id: I4bdad64e2dfd692ef2adccf2e5e82e9b1996a8ea
Reviewed-on: https://go-review.googlesource.com/18206Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>

This CL changes the source file information in the
standard library's .a files to say "$GOROOT/src/runtime/chan.go"
(with a literal "$GOROOT") instead of spelling out the actual directory.
The linker then substitutes the actual $GOROOT (or $GOROOT_FINAL)
as appropriate.

If people download a binary distribution to an alternate location,
following the instructions at https://golang.org/doc/install#install,
the code before this CL would end up with source paths pointing to
/usr/local/go no matter where the actual sources were.
Now the source paths for built binaries will point to the actual sources
(hopefully).

The source line information in distributed binaries is not affected:
those will still say /usr/local/go. But binaries people build themselves
(their own programs, not the go distribution programs) will be correct.

Fixing this path also fixes the lookup of the runtime-gdb.py file.

Fixes #5533.

Change-Id: I03729baae3fbd8cd636e016275ee5ad2606e4663
Reviewed-on: https://go-review.googlesource.com/18200
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Following the parallelization of some tests, a race condition can
occur in testcarchive, testshared and testcshared.

In some cases, it can result in the go env GOROOT command returning
corrupted data, which are then passed to a rm command.

Make the shell script more robust by not trusting the result of
the go env GOROOT command. It does not really fix the issue, but
at least prevent the entire repository to be deleted.

Updates #13789

Change-Id: Iaf04a7bd078ed3a82e724e35c4b86e6f756f2a2f
Reviewed-on: https://go-review.googlesource.com/18173
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>