Fixes #30571

Change-Id: Id4c74e83ee58a080d1c2894ae5ebdbf4aeb1ce42
Reviewed-on: https://go-review.googlesource.com/c/go/+/167084
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This internally exported function allowed merging environment variable
lists, and was mostly a convenience for the rest of cmd/go/internal.
It seems to date all the way back to 2013.

However, since CL 37586 in early 2017, os/exec has already taken care of
deduplicating environment variable lists. Thus, it's unnecessary for
cmd/go to take care of that before calling exec.Cmd.Start.

Moreover, because os/exec will deduplicate the list in any case, we're
adding extra work in all these scenarios.

Finally, remove an unnecessary addition of GOROOT= in internal/tool.
cfg.OrigEnv may not have the correct GOROOT set up, but os.Environ does;
cmd/go's main function makes sure of that.

Change-Id: I1f92f65fb927dc15bc7b0397cfd1a572b6337bb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/164703
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Most of the decoding time is spent in the first Decode loop, since the
rest of the function only deals with the few remaining bytes. Any
unnecessary work done in that loop body matters tremendously.

One such unnecessary bottleneck was the use of the enc.decodeMap table.
Since enc is a pointer receiver, and the field is used within the
non-inlineable function decode64, the decoder must perform a nil check
at every iteration.

To fix that, move the enc.decodeMap uses to the parent function, where
we can lift the nil check outside the loop. That gives roughly a 15%
speed-up. The function no longer performs decoding per se, so rename it.
While at it, remove the now unnecessary receivers.

An unfortunate side effect of this change is that the loop now contains
eight bounds checks on src instead of just one. However, not having to
slice src plus the nil check removal well outweigh the added cost.

The other piece that made decode64 slow was that it wasn't inlined, and
had multiple branches. Use a simple bitwise-or trick suggested by Roger
Peppe, and collapse the rest of the bitwise logic into a single
expression. Inlinability and the reduced branching give a further 10%
speed-up.

Finally, add these two functions to TestIntendedInlining, since we want
them to stay inlinable.

Apply the same refactor to decode32 for consistency, and to let 32-bit
architectures see a similar performance gain for large inputs.

name                 old time/op    new time/op    delta
DecodeString/2-8       47.3ns ± 1%    45.8ns ± 0%   -3.28%  (p=0.002 n=6+6)
DecodeString/4-8       55.8ns ± 2%    51.5ns ± 0%   -7.71%  (p=0.004 n=5+6)
DecodeString/8-8       64.9ns ± 0%    61.7ns ± 0%   -4.99%  (p=0.004 n=5+6)
DecodeString/64-8       238ns ± 0%     198ns ± 0%  -16.54%  (p=0.002 n=6+6)
DecodeString/8192-8    19.5µs ± 0%    14.6µs ± 0%  -24.96%  (p=0.004 n=6+5)

name                 old speed      new speed      delta
DecodeString/2-8     84.6MB/s ± 1%  87.4MB/s ± 0%   +3.38%  (p=0.002 n=6+6)
DecodeString/4-8      143MB/s ± 2%   155MB/s ± 0%   +8.41%  (p=0.004 n=5+6)
DecodeString/8-8      185MB/s ± 0%   195MB/s ± 0%   +5.29%  (p=0.004 n=5+6)
DecodeString/64-8     369MB/s ± 0%   442MB/s ± 0%  +19.78%  (p=0.002 n=6+6)
DecodeString/8192-8   560MB/s ± 0%   746MB/s ± 0%  +33.27%  (p=0.004 n=6+5)

Updates #19636.

Change-Id: Ib839577b0e3f5a2bb201f5cae580c61365d92894
Reviewed-on: https://go-review.googlesource.com/c/go/+/151177
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: roger peppe <rogpeppe@gmail.com>

This change makes it possible the runtime-integrated network poller and
APIs in the package internal/poll to report an event scanning error on a
read event.

The latest Go releases open up the way of the manipulation of the poller
for users. On the other hand, it starts misleading users into believing
that the poller accepts any user-configured file or socket perfectly
because of not reporting any error on event scanning, as mentioned in
issue 30426. The initial implementation of the poller was designed for
just well-configured, validated sockets produced by the package net.
However, the assumption is now obsolete.

Fixes #30624.

Benchmark results on linux/amd64:

benchmark                              old ns/op     new ns/op     delta
BenchmarkTCP4OneShot-4                 24649         23979         -2.72%
BenchmarkTCP4OneShotTimeout-4          25742         24411         -5.17%
BenchmarkTCP4Persistent-4              5139          5222          +1.62%
BenchmarkTCP4PersistentTimeout-4       4919          4892          -0.55%
BenchmarkTCP6OneShot-4                 21182         20767         -1.96%
BenchmarkTCP6OneShotTimeout-4          23364         22305         -4.53%
BenchmarkTCP6Persistent-4              4351          4366          +0.34%
BenchmarkTCP6PersistentTimeout-4       4227          4255          +0.66%
BenchmarkTCP4ConcurrentReadWrite-4     2309          1839          -20.36%
BenchmarkTCP6ConcurrentReadWrite-4     2180          1791          -17.84%

benchmark                              old allocs     new allocs   delta
BenchmarkTCP4OneShot-4                 26             26           +0.00%
BenchmarkTCP4OneShotTimeout-4          26             26           +0.00%
BenchmarkTCP4Persistent-4              0              0            +0.00%
BenchmarkTCP4PersistentTimeout-4       0              0            +0.00%
BenchmarkTCP6OneShot-4                 26             26           +0.00%
BenchmarkTCP6OneShotTimeout-4          26             26           +0.00%
BenchmarkTCP6Persistent-4              0              0            +0.00%
BenchmarkTCP6PersistentTimeout-4       0              0            +0.00%
BenchmarkTCP4ConcurrentReadWrite-4     0              0            +0.00%
BenchmarkTCP6ConcurrentReadWrite-4     0              0            +0.00%

benchmark                              old bytes     new bytes     delta
BenchmarkTCP4OneShot-4                 2000          2000          +0.00%
BenchmarkTCP4OneShotTimeout-4          2000          2000          +0.00%
BenchmarkTCP4Persistent-4              0             0             +0.00%
BenchmarkTCP4PersistentTimeout-4       0             0             +0.00%
BenchmarkTCP6OneShot-4                 2144          2144          +0.00%
BenchmarkTCP6OneShotTimeout-4          2144          2145          +0.05%
BenchmarkTCP6Persistent-4              0             0             +0.00%
BenchmarkTCP6PersistentTimeout-4       0             0             +0.00%
BenchmarkTCP4ConcurrentReadWrite-4     0             0             +0.00%
BenchmarkTCP6ConcurrentReadWrite-4     0             0             +0.00%

Change-Id: Iab60e504dff5639e688dc5420d852f336508c0af
Reviewed-on: https://go-review.googlesource.com/c/go/+/166497
Run-TryBot: Mikio Hara <mikioh.public.networking@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

-mcmodel=large and -Wl,-bbigtoc must always be passed to gcc in order to
prevent TOC overflow error. However, a warning is still issued by ld. It
is removed as it doesn't give any useful information.

Change-Id: I95a78e8993cc7b5c0f329654d507409785f7eea6
Reviewed-on: https://go-review.googlesource.com/c/go/+/164008
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #25492

Change-Id: Ic1496857524dad0c0a77f3bb80fa084c9bf00aa9
Reviewed-on: https://go-review.googlesource.com/c/go/+/155777
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>

DWARF relocations isn't working with some older ld, because of
-Wl,-bnoobjreorder which is needed on Go.
This commit checks ld's version and disable DWARF generation in cmd/link
if it's too old. Some tests must therefore be skipped.

Change-Id: I2e794c263eb0dfe0b42e7062fb80c26f086b44d1
Reviewed-on: https://go-review.googlesource.com/c/go/+/164007
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #30722.

Change-Id: Ia4c6e37282edc44788cd8af3f6cfa10895a19e4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166519Reviewed-by: Matthew Dempsky <mdempsky@google.com>

With math/big supporting underscores directly, there is no need to
manually remove them before calling the math/big conversion routines.

Updates #28493.

Change-Id: I6f865c8f87c3469ffd6c33f960ed540135055226
Reviewed-on: https://go-review.googlesource.com/c/go/+/166417Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The primary change is in nat.scan which now accepts underscores for base 0.
While at it, streamlined error handling in that function as well.
Also, improved the corresponding test significantly by checking the
expected result values also in case of scan errors.

The second major change is in scanExponent which now accepts underscores when
the new sepOk argument is set. While at it, essentially rewrote that
function to match error and underscore handling of nat.scan more closely.
Added a new test for scanExponent which until now was only tested
indirectly.

Finally, updated the documentation for several functions and added many
new test cases to clients of nat.scan.

A major portion of this CL is due to much better test coverage.

Updates #28493.

Change-Id: I7f17b361b633fbe6c798619d891bd5e0a045b5c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/166157Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

Lines with single cells prompt a flush. Unfortunately, a call to
Writer.Flush also means two defers, which is an expensive operation to
do if many lines consist of single cells.

This is common when formatting code with aligned comments. Most lines
aren't going to have any comments at all, so the performance hit is
going to be noticeable.

The Write method already has a "defer handlePanic" of its own, so we
don't need to worry about panics leaking out. The error will now mention
"Write" instead of "Flush" if a panic is encountered during that nested
flush, but arguably that's a good thing; the user called Write, not
Flush.

For the reset call, add a non-deferred call as part of flushNoDefers, as
that's still necessary. Otherwise, the exported Flush method still does
a "defer b.reset".

The current tabwriter benchmarks are unaffected, since they don't
contain many single-cell lines, and because lines are written one at a
time. For that reason, we add a benchmark which has both of these
characteristics.

name    old time/op    new time/op    delta
Code-8    2.72µs ± 0%    1.77µs ± 0%  -34.88%  (p=0.000 n=6+5)

name    old alloc/op   new alloc/op   delta
Code-8      648B ± 0%      648B ± 0%     ~     (all equal)

name    old allocs/op  new allocs/op  delta
Code-8      13.0 ± 0%      13.0 ± 0%     ~     (all equal)

Perhaps unsurprisingly, go/printer also gets a bit faster, as it too
buffers its output before writing it to tabwriter.

name     old time/op  new time/op  delta
Print-8  6.53ms ± 0%  6.39ms ± 0%  -2.22%  (p=0.008 n=5+5)

Change-Id: Ie01fea5ced43886a9eb796cb1e6c810f7a810853
Reviewed-on: https://go-review.googlesource.com/c/go/+/166797
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>

I typo'd this variable in CL 165745, and neither I, the reviewer, nor the TryBots noticed.
But the longtest builder noticed, and it's not happy about it.

Updates #30571

Change-Id: I5e3d267346407855ec0d1f340a72dc2c521ecc63
Reviewed-on: https://go-review.googlesource.com/c/go/+/167086
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This test invokes 'go build', so in module mode it needs a module
cache to guard edits to go.mod.

Fixes #30776

Change-Id: I89ebef1fad718247e7f972cd830e31d6f4a83e4c
Reviewed-on: https://go-review.googlesource.com/c/go/+/167085
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The sheer length of the generated rules files makes my
editor and git client unhappy.
This change is a small step towards shortening them.

We recognize a few magic variables during rulegen: b, config, fe, typ.
Of these, only b appears prone to false positives.
By tightening the heuristic and fixing one case in MIPS.rules,
we can make the heuristic enough that it has no failures.
That allows us to remove the hedge assignments to _,
removing 3000 pointless lines of code.

Change-Id: I080cde5db28c8277cb3fd9ddcd829306c9a27785
Reviewed-on: https://go-review.googlesource.com/c/go/+/166979
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Fixes #30756

Change-Id: I046d43df56faac8fc09d53dc1e87a014dd6d530b
Reviewed-on: https://go-review.googlesource.com/c/go/+/167080
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

Change-Id: Ib268157674824fd7552d3c36a61eccf8c720eaeb
Reviewed-on: https://go-review.googlesource.com/c/go/+/167083
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #30123

Change-Id: I310b89a344a262bb758d39dfdd485ed2940cc6aa
Reviewed-on: https://go-review.googlesource.com/c/go/+/166577
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

GOPATH/pkg contains, among other things, the module cache (and associated lockfiles).

Fixes #30776

Change-Id: I305cb3c0daab8cedd2e6ad235d4733f66af18723
Reviewed-on: https://go-review.googlesource.com/c/go/+/167082Reviewed-by: Jay Conrod <jayconrod@google.com>

Chdir leaves the test in the wrong working directory if objdumpOutput
calls t.Fatalf (or panics), and it isn't necessary here anyway. Set
the Dir field on the commands instead.

Change-Id: I9f0eb0d4f8d15043f1e13472126ca1a1ce4b7cb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/167081
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This CL documents the new binary and octal integer literals,
hexadecimal floats, generalized imaginary literals and digit
separators for all number literals in the spec.

Added empty lines between abutting paragraphs in some places
(a more thorough cleanup can be done in a separate CL).

A minor detail: A single 0 was considered an octal zero per the
syntax (decimal integer literals always started with a non-zero
digit). The new octal literal syntax allows 0o and 0O prefixes
and when keeping the respective octal_lit syntax symmetric with
all the others (binary_lit, hex_lit), a single 0 is not automatically
part of it anymore. Rather than complicating the new octal_lit syntax
to include 0 as before, it is simpler (and more natural) to accept
a single 0 as part of a decimal_lit. This is purely a notational
change.

R=Go1.13

Updates #12711.
Updates #19308.
Updates #28493.
Updates #29008.

Change-Id: Ib9fdc6e781f6031cceeed37aaed9d05c7141adec
Reviewed-on: https://go-review.googlesource.com/c/go/+/161098Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This change adds a fast path for ASCII strings to both
strings.TrimSpace and bytes.TrimSpace. It doesn't slow down the
non-ASCII path much, if at all.

I added benchmarks for strings.TrimSpace as it didn't have any, and
I fleshed out the benchmarks for bytes.TrimSpace as it just had one
case (for ASCII). The benchmarks (and the code!) are now the same
between the two versions. Below are the benchmark results:

strings.TrimSpace:

name                      old time/op  new time/op  delta
TrimSpace/NoTrim-8        18.6ns ± 0%   3.8ns ± 0%  -79.53%  (p=0.000 n=5+4)
TrimSpace/ASCII-8         33.5ns ± 2%   6.0ns ± 3%  -82.05%  (p=0.008 n=5+5)
TrimSpace/SomeNonASCII-8  97.1ns ± 1%  88.6ns ± 1%   -8.68%  (p=0.008 n=5+5)
TrimSpace/JustNonASCII-8   144ns ± 0%   143ns ± 0%     ~     (p=0.079 n=4+5)

bytes.TrimSpace:

name                      old time/op  new time/op  delta
TrimSpace/NoTrim-8        18.9ns ± 1%   4.1ns ± 1%  -78.34%  (p=0.008 n=5+5)
TrimSpace/ASCII-8         29.9ns ± 0%   6.3ns ± 1%  -79.06%  (p=0.008 n=5+5)
TrimSpace/SomeNonASCII-8  91.5ns ± 0%  82.3ns ± 0%  -10.03%  (p=0.008 n=5+5)
TrimSpace/JustNonASCII-8   150ns ± 0%   150ns ± 0%     ~     (all equal)

Fixes #29122

Change-Id: Ica45cd86a219cadf60173ec9db260133cd1d7951
Reviewed-on: https://go-review.googlesource.com/c/go/+/152917Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>

strings.HasPrefix is not good enough to determine whether a path
is a subdirectory of another because it does not respect path
boundaries. filepath.Rel is good eonugh as long as we filter out results
that use parent directories, "..".

Hopefully fix the android emulator builders on the subrepositories.

Change-Id: I17ee7e0028c0b0b26a6c5f67629f53c9a660c6e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/167117
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This fixes the root cause of the bootstrap failure reported in
https://groups.google.com/d/msg/golang-dev/xcVJDj5GJ84/U0pVnUOnBwAJ.

Updates #30228

Change-Id: I9ce0898922a5aac1f61ceff30319cf88031676c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/167079
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

Updates #30228

Change-Id: Ica28525b31a8a787875c147e16274eba8f4dbffc
Reviewed-on: https://go-review.googlesource.com/c/go/+/167078
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

I thought I had removed all of the 'mod=vendor' hacks I had inserted
previously, but apparently missed this one in a bad merge or rebase.

Updates #30228

Change-Id: Ia5aea754bf986458373fefd08fa9dd3941e31e43
Reviewed-on: https://go-review.googlesource.com/c/go/+/167077
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

The CL 164718 adds new condition flags for floating-point comparisons
in arm64 backend, but dose not add the handling in rewrite.go for
corresponding Ops, which causes issue 30679. And this CL fixes this
issue.

Fixes #30679

Change-Id: I8acc749f78227c3e9e74fa7938f05fb442fb62c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/166579Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Implemented via the underlying nat.trailingZeroBits.

Fixes #29578

Change-Id: If9876c5a74b107cbabceb7547bef4e44501f6745
Reviewed-on: https://go-review.googlesource.com/c/go/+/160681Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Move the shared code into byteal.memeqbody. This will allow to implement
optimizations (e.g. for #29001) in a single function.

Change-Id: Iaa34ddeb7068d92c35a8b4e581b7fd92da56535c
Reviewed-on: https://go-review.googlesource.com/c/go/+/166677
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Support for FreeBSD 10 will be dropped with Go 1.13, so revert the
workaround introduced in CL 157099.

Updates #29633
Updates #27619

Change-Id: I1a2e50d3f807a411389f3db07c0f4535a590da02
Reviewed-on: https://go-review.googlesource.com/c/go/+/165801
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This fixes the builder flake observed in
https://build.golang.org/log/84fe80f8f091b9cef639b3ae2422a673f1462810,
which could be replicated by running

	GOPROXY=off GOPATH=$(mktemp -d) go test go/internal/srcimporter

Updates #30228
Fixes #30760

Change-Id: Ibf8b7a2e211611960b074b74af91acd4f0196edb
Reviewed-on: https://go-review.googlesource.com/c/go/+/166977
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This reverts commit cf469165
(CL 162698).

Reason for revert: broke make.bash bootstrapping from head.

Change-Id: I3de6d26b1af9038c6b92dec88667bfa734060a41
Reviewed-on: https://go-review.googlesource.com/c/go/+/166985Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Before this CL, uid/gid mapping was always set up from the parent
process, which is a privileged operation.

When using unprivileged user namespaces, a process can modify its
uid/gid mapping after the unshare(2) call (but setting the uid/gid
mapping from another process is NOT possible).

Fixes #29789

Change-Id: I8c96a03f5da23fe80bbb83ef051ad89cf185d750
Reviewed-on: https://go-review.googlesource.com/c/go/+/158298
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

New test for issue 30659 (compilation error due to bad
export data).

Updates #30659.

Change-Id: I2541ee3c379e5b22033fea66bb4ebaf720cc5e1f
Reviewed-on: https://go-review.googlesource.com/c/go/+/166917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Change-Id: I73441ba2eb349f0e0f25068e6b24c74dd33f1456
GitHub-Last-Rev: b9e6705962b94af3b1b720cc9ad6d33d7d3f1425
GitHub-Pull-Request: golang/go#30017
Reviewed-on: https://go-review.googlesource.com/c/go/+/160441Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

The deadcode pass runs a lot.
I'd like it to run even more.

This change adds dedicated storage for deadcode to ssa.Cache.
In addition to being a nice win now, it makes
deadcode easier to add other places in the future.

name        old time/op       new time/op       delta
Template          210ms ± 3%        209ms ± 2%    ~     (p=0.951 n=93+95)
Unicode          92.2ms ± 3%       93.0ms ± 3%  +0.87%  (p=0.000 n=94+94)
GoTypes           739ms ± 2%        733ms ± 2%  -0.84%  (p=0.000 n=92+94)
Compiler          3.51s ± 2%        3.49s ± 2%  -0.57%  (p=0.000 n=94+91)
SSA               9.80s ± 2%        9.75s ± 2%  -0.57%  (p=0.000 n=95+92)
Flate             132ms ± 2%        132ms ± 3%    ~     (p=0.165 n=94+98)
GoParser          160ms ± 3%        159ms ± 3%  -0.42%  (p=0.005 n=96+94)
Reflect           446ms ± 4%        442ms ± 4%  -0.91%  (p=0.000 n=95+98)
Tar               186ms ± 3%        186ms ± 2%    ~     (p=0.221 n=94+97)
XML               252ms ± 2%        250ms ± 2%  -0.55%  (p=0.000 n=95+94)
[Geo mean]        430ms             429ms       -0.34%

name        old user-time/op  new user-time/op  delta
Template          256ms ± 3%        257ms ± 3%    ~     (p=0.521 n=94+98)
Unicode           120ms ± 9%        121ms ± 9%    ~     (p=0.074 n=99+100)
GoTypes           935ms ± 3%        935ms ± 2%    ~     (p=0.574 n=82+96)
Compiler          4.56s ± 1%        4.55s ± 2%    ~     (p=0.247 n=88+90)
SSA               13.6s ± 2%        13.6s ± 1%    ~     (p=0.277 n=94+95)
Flate             155ms ± 3%        156ms ± 3%    ~     (p=0.181 n=95+100)
GoParser          193ms ± 8%        184ms ± 6%  -4.39%  (p=0.000 n=100+89)
Reflect           549ms ± 3%        552ms ± 3%  +0.45%  (p=0.036 n=94+96)
Tar               230ms ± 4%        230ms ± 4%    ~     (p=0.670 n=97+99)
XML               315ms ± 5%        309ms ±12%  -2.05%  (p=0.000 n=99+99)
[Geo mean]        540ms             538ms       -0.47%

name        old alloc/op      new alloc/op      delta
Template         40.3MB ± 0%       38.9MB ± 0%  -3.36%  (p=0.008 n=5+5)
Unicode          28.6MB ± 0%       28.4MB ± 0%  -0.90%  (p=0.008 n=5+5)
GoTypes           137MB ± 0%        132MB ± 0%  -3.65%  (p=0.008 n=5+5)
Compiler          637MB ± 0%        609MB ± 0%  -4.40%  (p=0.008 n=5+5)
SSA              2.19GB ± 0%       2.07GB ± 0%  -5.63%  (p=0.008 n=5+5)
Flate            25.0MB ± 0%       24.1MB ± 0%  -3.80%  (p=0.008 n=5+5)
GoParser         30.0MB ± 0%       29.1MB ± 0%  -3.17%  (p=0.008 n=5+5)
Reflect          87.1MB ± 0%       84.4MB ± 0%  -3.05%  (p=0.008 n=5+5)
Tar              37.3MB ± 0%       36.0MB ± 0%  -3.31%  (p=0.008 n=5+5)
XML              49.8MB ± 0%       48.0MB ± 0%  -3.69%  (p=0.008 n=5+5)
[Geo mean]       87.6MB            84.6MB       -3.50%

name        old allocs/op     new allocs/op     delta
Template           387k ± 0%         380k ± 0%  -1.76%  (p=0.008 n=5+5)
Unicode            342k ± 0%         341k ± 0%  -0.31%  (p=0.008 n=5+5)
GoTypes           1.39M ± 0%        1.37M ± 0%  -1.64%  (p=0.008 n=5+5)
Compiler          5.68M ± 0%        5.60M ± 0%  -1.41%  (p=0.008 n=5+5)
SSA               17.1M ± 0%        16.8M ± 0%  -1.49%  (p=0.008 n=5+5)
Flate              240k ± 0%         236k ± 0%  -1.99%  (p=0.008 n=5+5)
GoParser           309k ± 0%         304k ± 0%  -1.57%  (p=0.008 n=5+5)
Reflect           1.01M ± 0%        0.99M ± 0%  -2.69%  (p=0.008 n=5+5)
Tar                360k ± 0%         353k ± 0%  -1.91%  (p=0.008 n=5+5)
XML                447k ± 0%         441k ± 0%  -1.26%  (p=0.008 n=5+5)
[Geo mean]         858k              844k       -1.60%

Fixes #15306

Change-Id: I9f558adb911efddead3865542fe2ca71f66fe1da
Reviewed-on: https://go-review.googlesource.com/c/go/+/166718
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

The android emulator builders is running out of space after CL 165797
copied most of GOROOT to the device.
The pkg directory is by far the largest, so only include what seems
necessary to build the x/ repositories: pkg/android_$GOARCH and
pkg/tool/android_$GOARCH.

While here, rename the device root directory to match the exec
wrapper name and make sure the deferred cleanups actually run before
os.Exit.

Hopefully fixes the emulator builders.

Updates #23824

Change-Id: I4d1e3ab2c89fd1e5818503d323ddb87f073094da
Reviewed-on: https://go-review.googlesource.com/c/go/+/166397
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #30228

Change-Id: Ie45ba6483849b843eb6605272f686b9deffe5e48
Reviewed-on: https://go-review.googlesource.com/c/go/+/162698Reviewed-by: Jay Conrod <jayconrod@google.com>

This also updates the vendored-in versions of several packages: 'go
mod vendor' selects a consistent version of each module, but we had
previously vendored an ad-hoc selection of packages.

Notably, x/crypto/hkdf was previously vendored in at a much newer
commit than the rest of x/crypto. Bringing the rest of x/crypto up to
that commit introduced an import of golang.org/x/sys/cpu, which broke
the js/wasm build, requiring an upgrade of x/sys to pick up CL 165749.

Updates #30228
Updates #30241
Updates #25822

Change-Id: I5b3dbc232b7e6a048a158cbd8d36137af1efb711
Reviewed-on: https://go-review.googlesource.com/c/go/+/164623Reviewed-by: Filippo Valsorda <filippo@golang.org>

Updates #30241
Updates #30228

Change-Id: Ida0fe8263bf44e0498fed2048e22283ba5716835
Reviewed-on: https://go-review.googlesource.com/c/go/+/164622
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

This change preserves the maximum versions from cmd/vendor/vendor.json
where feasible, but bumps the versions of x/sys (for CL 162987) and
x/tools (for CL 162989 and CL 160837) so that 'go test all' passes in
module mode when run from a working directory in src/cmd.

A small change to cmd/vet (not vendored) was necessary to preserve its
flag behavior given a pristine copy of x/tools; see CL 162989 for more
detail.

This change was generated by running 'go mod vendor' at CL 164622.
(Welcoooome to the fuuuuuture!)

Updates #30228
Updates #30241

Change-Id: I889590318dc857d4a6e20c3023d09a27128d8255
Reviewed-on: https://go-review.googlesource.com/c/go/+/164618
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>