The address space of WebAssembly's linear memory is contiguous, so
requesting specific addresses is not supported. Do not use heap arena
hints so we do not have unused memory ranges.

This fixes go1 benchmarks on wasm which ran out of memory since
https://golang.org/cl/170950.

Change-Id: I70115b18dbe43abe16dd5f57996343d97bf94760
Reviewed-on: https://go-review.googlesource.com/c/go/+/174203
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

indirect walks down v until it gets to a non-pointer. But it does not
handle the case when v is a pointer to itself, like in:

	var v interface{}
	v = &v
	Unmarshal(b, v)

So just stop immediately if we see v is a pointer to itself.

Fixes #31740

Change-Id: Ie396264119e24d70284cd9bf76dcb2050babb069
Reviewed-on: https://go-review.googlesource.com/c/go/+/174337
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I8a4917ce14ea22d5991226e485d43a9c9312950e
Reviewed-on: https://go-review.googlesource.com/c/go/+/174219
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>

For the code:

m := map[int]int {
  a(): b(),
  c(): d(),
  e(): f(),
}

We used to do:

t1 := a()
t2 := b()
t3 := c()
t4 := d()
t5 := e()
t6 := f()
m := map[int]int{}
m[t1] = t2
m[t3] = t4
m[t5] = t6

After this CL we do:

m := map[int]int{}
t1 := a()
t2 := b()
m[t1] = t2
t3 := c()
t4 := d()
m[t3] = t4
t5 := e()
t6 := f()
m[t5] = t6

Ordering the initialization this way limits the lifetime of the
temporaries involved.  In particular, for large maps the number of
simultaneously live temporaries goes from ~2*len(m) to ~2. This change
makes the compiler (regalloc, mostly) a lot happier. The compiler runs
faster and uses a lot less memory.

For #26546, changes compile time of a big map from 8 sec to 0.5 sec.

Fixes #26552

Update #26546

Change-Id: Ib7d202dead3feaf493a464779fd9611c63fcc25f
Reviewed-on: https://go-review.googlesource.com/c/go/+/174417
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>

Updates #31656.

Change-Id: Ide6f829282fcdf20c67998b766a201a6a92c3035
Reviewed-on: https://go-review.googlesource.com/c/go/+/174132
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

When a callback runs on a different thread in Windows, as in the
runtime package test TestCallbackInAnotherThread, it will use the
extra M. That can cause the test in checkdead to fail incorrectly.
Check whether there actually is an extra M before expecting it.

I think this is a general problem unrelated to timers. I think the test
was passing previously because the timer goroutine was using an M.
But I haven't proved that. This change seems correct, and it avoids
the test failure when using the new timers on Windows.

Updates #27707

Change-Id: Ieb31c04ff0354d6fae7e173b59bcfadb8b0464cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/174037Reviewed-by: Keith Randall <khr@golang.org>

Change-Id: Ib102ae95acfd89fc3c9942a4ec82c74362f62045
Reviewed-on: https://go-review.googlesource.com/c/go/+/174299
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Most of the platforms are returning 0 instead of -1 when mmap syscalls
is failing. This patch corrects it for AIX in order to fix
TestMmapErrorSign and to improve AIX compatibility.

Change-Id: I1dad88d0e69163ad55c504b2b4a997892fd876cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/174297
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Any code that imports the testing package forces the testing flags to be
defined, even in non-test binaries. People work around this today by
defining a copy of the testing.TB interface just to avoid importing
testing.

Fix this by moving flag registration into a new function, testing.Init.
Delay calling Init until the testing binary begins to run, in
testing.MainStart.

Init is exported for cases where users need the testing flags to be
defined outside of a "go test" context. In particular, this may be
needed where testing.Benchmark is called outside of a test.

Fixes #21051

Change-Id: Ib7e02459e693c26ae1ba71bbae7d455a91118ee3
Reviewed-on: https://go-review.googlesource.com/c/go/+/173722Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #20858

Change-Id: I45c397795426aaa276b20f5cbeb80270c95b920c
Reviewed-on: https://go-review.googlesource.com/c/go/+/174320Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When running Go programs on Corellium virtual iPhones, the Info.plist
files might not exist. Ignore the error.

Updates #31722

Change-Id: Id2e315c09346b69dda9e10cf29fb5dba6743aac4
Reviewed-on: https://go-review.googlesource.com/c/go/+/174202
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #25210

Change-Id: If27b61776154dae9b9b67bf4e4f5faa785d98105
Reviewed-on: https://go-review.googlesource.com/c/go/+/174318Reviewed-by: Ian Lance Taylor <iant@golang.org>

For example, can use `goroutine all bt` to dump all goroutines'
information.

Change-Id: I51b547c2b837913e4bdabf0f45b28f09250a3e34
GitHub-Last-Rev: d04dcd4f581f97e35ee45969a864f1270d79e49b
GitHub-Pull-Request: golang/go#26283
Reviewed-on: https://go-review.googlesource.com/c/go/+/122589
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: David Chase <drchase@google.com>

OpenBSD does not provide auxv, however we still need to initialise cpu.HWCap.
For now initialise it to the bare minimum, until some form of CPU capability
detection is implemented or becomes available - see issue #31746.

Updates #31656

Change-Id: I68c3c069319fe60dc873f46def2a67c9f3d937d5
Reviewed-on: https://go-review.googlesource.com/c/go/+/174129
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Command line arguments containing multi-byte characters were causing
go_js_wasm_exec to crash (RangeError: Source is too large), because
their byte length was not handled correctly. This change fixes the bug.

Fixes #31645.

Change-Id: I7860ebf5b12da37d9d0f43d4b6a22d326a90edaf
Reviewed-on: https://go-review.googlesource.com/c/go/+/173877
Run-TryBot: Richard Musiol <neelance@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

KeepAlive field used to report the wording "keep-alive period"
which may be misleading. This field does not represent the whole
TCP keepalive time, that is the inactivity period upon which one
endpoint starts probing the other end. But it acctually specifies
the keepalive interval, that is the time between two keepalive
probes.

Fixes #29089

Change-Id: If99b38ba108830d0e5fe527171a2f5c96a3bcde7
Reviewed-on: https://go-review.googlesource.com/c/go/+/155960Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fix breakage from CL 173437

Change-Id: If218ffaa1259fbdee641143ffbe4b38030c373b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/174278Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

The behavior of Value.String method on non-string JavaScript types has
changed after CL 169757.

Update the implementation of Transport.RoundTrip method to construct the
Response.Status string without relying on result.Get("status").String(),
since that now returns strings like "<number: 200>" instead of "200".

Fixes #31736

Change-Id: I27b3e6cc95aa65fd1918b1400e88478a154aad12
Reviewed-on: https://go-review.googlesource.com/c/go/+/174218Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Richard Musiol <neelance@gmail.com>

I recently modified tabwriter to reduce the number of defers due to
flush calls. However, I forgot to notice that the new function
flushNoDefers can no longer return an error, due to the lack of the
defer.

In crypto/tls, hashForServerKeyExchange never returned a non-nil error,
so simplify the code.

Finally, in go/types and net we can find a few trivially unused
parameters, so remove them.

Change-Id: I54c8de83fbc944df432453b55c93008d7e810e61
Reviewed-on: https://go-review.googlesource.com/c/go/+/174131
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>

Adds a sample Fuzz test function to package encoding/json following the
guidelines defined in #31309, based on
https://github.com/dvyukov/go-fuzz-corpus/blob/master/json/json.go

Fixes #31309
Updates #19109

Change-Id: I5fe04d9a5f41c0de339f8518dae30896ec14e356
Reviewed-on: https://go-review.googlesource.com/c/go/+/174058Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This CL adds support for consulting the Go checksum database
when downloading a module that is not already listed in go.sum.
The overall system is described at golang.org/design/25530-sumdb,
and this CL implements the functionality described specifically in
golang.org/design/25530-sumdb#command-client.

Although the eventual plan is to set GOPROXY and GOSUMDB to
default to a Google-run proxy serving the public Go ecosystem,
this CL leaves them off by default.

Fixes #30601.

Change-Id: Ie46140f93c6cc2d85573fbce0878a258819ff44d
Reviewed-on: https://go-review.googlesource.com/c/go/+/173951
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Updates #30990

Change-Id: I968fb13251ab3796328089046a3f0fc5c7eb9df9
Reviewed-on: https://go-review.googlesource.com/c/go/+/174204Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Whitelists functions debugCall32 through debugCall65536 in
runtime.debugCallCheck so that any instruction inside those functions
is considered a safe point.
This is useful for implementing nested function calls.

For example when evaluating:

	f(g(x))

The debugger should:

1. initiate the call to 'f' until the entry point of 'f',
2. complete the call to 'g(x)'
3. copy the return value of 'g(x)' in the arguments of 'f'
4. complete the call to 'f'

Similarly for:

	f().amethod()

The debugger should initiate the call to '.amethod()', then initiate
and complete the call to f(), copy the return value to the arguments
of '.amethod()' and finish its call.
However in this example, unlike the other example, it may be
impossible to determine the entry point of '.amethod()' until after
'f()' is evaluated, which means that the call to 'f()' needs to be
initiated while stopped inside a debugCall... function.

Change-Id: I575c23542709cedb1a171d63576f7e11069c7674
Reviewed-on: https://go-review.googlesource.com/c/go/+/161137
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>

This change creates an intrinsic for Add64 for ppc64x and adds a
testcase for it.

name               old time/op  new time/op  delta
Add64-160          1.90ns ±40%  2.29ns ± 0%     ~     (p=0.119 n=5+5)
Add64multiple-160  6.69ns ± 2%  2.45ns ± 4%  -63.47%  (p=0.016 n=4+5)

Change-Id: I9abe6fb023fdf62eea3c9b46a1820f60bb0a7f97
Reviewed-on: https://go-review.googlesource.com/c/go/+/173758Reviewed-by: Lynn Boger <laboger@linux.vnet.ibm.com>
Run-TryBot: Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>

The kqueue system call takes no arguments, hence there should be no need
to zero the registers used for the first syscall arguments.

Change-Id: Ia79b2d4f4d568bb6795cb885e1464cf1fc2bf7c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/174128
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>

This allows creating processes that can only be debugged/accessed by
certain tokens, according to a particular security descriptor. We
already had everything ready for this but just neglected to pass through
the value from the user-accessible SysProcAttr.

Change-Id: I4a3fcc9f5078aa0058b26c103355c984093ae03f
Reviewed-on: https://go-review.googlesource.com/c/go/+/174197
Run-TryBot: Jason Donenfeld <Jason@zx2c4.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>

CL 172418 added code to check for "Access is denied" error.
But "Access is denied" error will be spelled differently on
non-English version of Windows.

Check if error is ERROR_ACCESS_DENIED instead.

Updates #31247

Change-Id: I7b1633013d563f7c06c1f12a9be75122106834f9
Reviewed-on: https://go-review.googlesource.com/c/go/+/174123Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

getfsstat64 is deprecated but not yet caught by the App Store checks.
Use the supported getfsstat$INODE64 form instead to ensure forward
compatibility.

Change-Id: I0d97e8a8b254debb3de1cfcb3778dbed3702c249
Reviewed-on: https://go-review.googlesource.com/c/go/+/174200
Run-TryBot: Elias Naur <mail@eliasnaur.com>
Reviewed-by: Keith Randall <khr@golang.org>

Some libc functions are suffixed with "$INODE64" on macOS.
Unfortunately, the iOS simulator doesn't have the suffixes, so we can't
use GOARCH to distinguish the two platform.

Add linker support for adding the suffix, using the macho platform
to determine whether it is needed.

While here, add the correct suffix for fdopendir on 386. It's
"$INODE64$UNIX2003", believe it or not. Without the suffix,

GOARCH=386 go test -short syscall

crashes on my Mojave machine.

Fixes #31447

Change-Id: I9bd3de40ece7df62f744bc24cd00909e56b00b78
Reviewed-on: https://go-review.googlesource.com/c/go/+/174199
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Determine the macho platform once and use that the two places that
need it. This makes it easier to add a third platform check for a
follow-up change.

Updates #31447

Change-Id: I522a5fface647ab8e608f816c5832d531534df7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/174198
Run-TryBot: Elias Naur <mail@eliasnaur.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17

This general rule can compute divisibilty by one multiplication and a compare
for odd divisors and an additional rotate for even divisors.

To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt".  This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also available.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.

Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.

Additional rules to lower the generic RotateLeft* ops were also applied.

On amd64, the divisibility check is 25-50% faster.

name                     old time/op  new time/op  delta
DivconstI64-4            2.08ns ± 0%  2.08ns ± 1%     ~     (p=0.881 n=5+5)
DivisibleconstI64-4      2.67ns ± 0%  2.67ns ± 1%     ~     (p=1.000 n=5+5)
DivisibleWDivconstI64-4  2.67ns ± 0%  2.67ns ± 0%     ~     (p=0.683 n=5+5)
DivconstU64-4            2.08ns ± 1%  2.08ns ± 1%     ~     (p=1.000 n=5+5)
DivisibleconstU64-4      2.77ns ± 1%  1.55ns ± 2%  -43.90%  (p=0.008 n=5+5)
DivisibleWDivconstU64-4  2.99ns ± 1%  2.99ns ± 1%     ~     (p=1.000 n=5+5)
DivconstI32-4            1.53ns ± 2%  1.53ns ± 0%     ~     (p=1.000 n=5+5)
DivisibleconstI32-4      2.23ns ± 0%  2.25ns ± 3%     ~     (p=0.167 n=5+5)
DivisibleWDivconstI32-4  2.27ns ± 1%  2.27ns ± 1%     ~     (p=0.429 n=5+5)
DivconstU32-4            1.78ns ± 0%  1.78ns ± 1%     ~     (p=1.000 n=4+5)
DivisibleconstU32-4      2.52ns ± 2%  1.26ns ± 0%  -49.96%  (p=0.000 n=5+4)
DivisibleWDivconstU32-4  2.63ns ± 0%  2.85ns ±10%   +8.29%  (p=0.016 n=4+5)
DivconstI16-4            1.54ns ± 0%  1.54ns ± 0%     ~     (p=0.333 n=4+5)
DivisibleconstI16-4      2.10ns ± 0%  2.10ns ± 1%     ~     (p=0.571 n=4+5)
DivisibleWDivconstI16-4  2.22ns ± 0%  2.23ns ± 1%     ~     (p=0.556 n=4+5)
DivconstU16-4            1.09ns ± 0%  1.01ns ± 1%   -7.74%  (p=0.000 n=4+5)
DivisibleconstU16-4      1.83ns ± 0%  1.26ns ± 0%  -31.52%  (p=0.008 n=5+5)
DivisibleWDivconstU16-4  1.88ns ± 0%  1.89ns ± 1%     ~     (p=0.365 n=5+5)
DivconstI8-4             1.54ns ± 1%  1.54ns ± 1%     ~     (p=1.000 n=5+5)
DivisibleconstI8-4       2.10ns ± 0%  2.11ns ± 0%     ~     (p=0.238 n=5+4)
DivisibleWDivconstI8-4   2.22ns ± 0%  2.23ns ± 2%     ~     (p=0.762 n=5+5)
DivconstU8-4             0.92ns ± 1%  0.94ns ± 1%   +2.65%  (p=0.008 n=5+5)
DivisibleconstU8-4       1.66ns ± 0%  1.26ns ± 1%  -24.28%  (p=0.008 n=5+5)
DivisibleWDivconstU8-4   1.79ns ± 0%  1.80ns ± 1%     ~     (p=0.079 n=4+5)

A follow-up change will address the signed division case.

Updates #30282

Change-Id: I7e995f167179aa5c76bb10fbcbeb49c520943403
Reviewed-on: https://go-review.googlesource.com/c/go/+/168037
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>

Updates #31656

Change-Id: If481df050cd879f7c7c22a79c17c33af00a8b389
Reviewed-on: https://go-review.googlesource.com/c/go/+/174125
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Updates #31656

Change-Id: Ie28734298bf1a2d5243f1ac15569311c1887176e
Reviewed-on: https://go-review.googlesource.com/c/go/+/174126Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

The notdead argument to sys___threxit() is a pointer, hence requires a 64-bit
move rather than a 32-bit one.

Updates #31656

Change-Id: I52ad31ed5afaf43ccc3d934025288216e8052528
Reviewed-on: https://go-review.googlesource.com/c/go/+/174124Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Preserve file modification times when copying bootstrap tree,
this makes generated bootstrap more friendly to rsyncing.

Change-Id: I32cde58c25b48d3c00d4413860dbd49a265b0ff2
Reviewed-on: https://go-review.googlesource.com/c/go/+/174217Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Change-Id: I38b22786aae3d7a08cf2863ef5d15e476fe30093
GitHub-Last-Rev: 57d07dd1c711029b965afd32e1d8a3c22560276f
GitHub-Pull-Request: golang/go#31711
Reviewed-on: https://go-review.googlesource.com/c/go/+/174086Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

It is common for database integers to be represented as int32
internally. Although NullInt64 is already defined,
this should remove some type casts and make working with those eaiser.

For #31231

Change-Id: Ia0c37ecef035fee0734c1d1fb6f58aef6905cf5e
Reviewed-on: https://go-review.googlesource.com/c/go/+/174178
Run-TryBot: Daniel Theophanes <kardianos@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

For linking large binaries, the slice of Relocs consumes a large
amount of memory. We can reduce this memory consumption by
shrinking the size of the Reloc struct. This CL moves the fields
used only in external linking or only on PPC64 and S390X to a
lazily initialized side struct.

Linking k8s.io/kubernetes/cmd/kube-apiserver on Linux/AMD64,
before:
inuse_space 1240.25MB total
438.11MB 35.32% 35.32%   438.11MB 35.32%  cmd/link/internal/objfile.(*objReader).readSlices

after:
inuse_space 1123.39MB total
306.85MB 27.31% 55.03%   306.85MB 27.31%  cmd/link/internal/objfile.(*objReader).readSlices

Under GOGC=5 (to simulate system under memory pressure), the max
RSS reduces from ~2.05G to ~1.83G. Even with external linking the
max RSS doesn't increase.

Change-Id: I9bb8a8effaed24a8b3c4b1cfb93e6992b8740f91
Reviewed-on: https://go-review.googlesource.com/c/go/+/173437
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

A nil src (NULL database value) will result in a "nil" string,
which will never parse correctly in a ParseInt or similar
numeric conversion. The resulting error is confusing. Check
for a nil src prior to converting the value to string
if the resulting string will be parsed after that.

Closes #31274

Change-Id: I90f12cceff00fbbfdd3e343b04fa7e2596390e6d
Reviewed-on: https://go-review.googlesource.com/c/go/+/174177Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This updates the packages from text and net to use
the Unicode 11 tables.

Updates golang/go#27945

Change-Id: I096e80283f37b596f2aa8bd3e5ffec6b7045469a
Reviewed-on: https://go-review.googlesource.com/c/go/+/174057
Run-TryBot: Marcel van Lohuizen <mpvl@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>