Fixes #9530.

Change-Id: Iadfc027c7164e3ba35adb5c67deb42b51d3498ca
Reviewed-on: https://go-review.googlesource.com/12603Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Dave Cheney <dave@cheney.net>

Currently TestDoDupSuppress can fail if the goroutines created by its
loop run sequentially. This is rare, but it has caused failures on the
dashboard and in stress testing.

While I think there's no way to eliminate all possible thread
schedules that could make this test fail because it depends on waiting
until a Group.Do blocks, it is possible to make it much more robust.

This commit deflakes this test by forcing at least one invocation of
fn to start and all goroutines to reach the line just before the Do
call before allowing fn to proceed. fn then waits 10 milliseconds
before returning to allow the goroutines to pass through the Do.

With this change, in 50,000 runs of the stress testing configuration,
the number of calls to fn never even exceeded 1.

Fixes #11784.

Change-Id: Ie5adf5764545050ec407619769a656251c4cff04
Reviewed-on: https://go-review.googlesource.com/12681Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Update the docs to explain the code added in
commit 67e1d400.

Fixes #11831.

Change-Id: I8fe72e449507847c4bd9d77de40947ded7f2ff9d
Reviewed-on: https://go-review.googlesource.com/12515Reviewed-by: Dave Cheney <dave@cheney.net>

Change-Id: I102901e3df76830ccd5ab74d757203d103eef9e8
Reviewed-on: https://go-review.googlesource.com/12657Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Issue 11214 reports problems with older versions of gdb.  It does work
with gdb 7.9 on my Ubuntu Trusty system, so take that as the minimum
required version.

Fixes #11214.

Change-Id: I61b732895506575be7af595f81fc1bcf696f58c2
Reviewed-on: https://go-review.googlesource.com/12626Reviewed-by: Austin Clements <austin@google.com>

This adds documentation for all the environment variables I could
locate in the go tool and the commands that it invokes.

Fixes #9672.

Change-Id: Id5f09160a3a8a938af4a3fcb8757eb3eced05416
Reviewed-on: https://go-review.googlesource.com/12620Reviewed-by: Rob Pike <r@golang.org>

Fixes #11847.

Change-Id: I21736a4c6f6fb2f61aec1396ce2c965e3e329e92
Reviewed-on: https://go-review.googlesource.com/12621Reviewed-by: Mikio Hara <mikioh.mikioh@gmail.com>

In https://go-review.googlesource.com/#/c/8611/ , these tests were
supposed to be skipped only for linux and darwin, as the comment says.
This patch fixes the logic in the if test.

Change-Id: Iff0a32186267457a414912c4c3ee4495650891a2
Reviewed-on: https://go-review.googlesource.com/12517Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>

Old code appended, did not play well with a closure
with a ... param.

Fixes #11075.

Change-Id: Ib7c8590c5c4e576e798837e7499e00f3494efb4a
Reviewed-on: https://go-review.googlesource.com/12580Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: David Chase <drchase@google.com>

This reverts commit b1177d39.

Change-Id: Iffbd63d5993633143a81572b223e3c5dd2353206
Reviewed-on: https://go-review.googlesource.com/12581Reviewed-by: Alan Donovan <adonovan@google.com>

On Windows, gcc -o foo will generate foo.exe.  Prevent that from
happening by adding a final '.' if necessary so that GCC thinks that
the file already has an extension.

Also remove the initial output file when doing an external link, and
use mayberemoveoutfile, not os.Remove, when building an archive
(otherwise we will do the wrong thing for -buildmode=c-archive -o
/dev/null).

I didn't add a test, as it requires using cgo and -o on Windows.

Fixes #11725.

Change-Id: I6ea12437bb6b4b9b8ee5c3b52d83509fa2437b2d
Reviewed-on: https://go-review.googlesource.com/12243Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>

See #10248 for details.

Fixes #10248.

Change-Id: I373545b2dca5d1da1c7149eb0a8f6c6dd8071a4c
Reviewed-on: https://go-review.googlesource.com/10503Reviewed-by: Russ Cox <rsc@golang.org>
Reviewed-by: Rob Pike <r@golang.org>

Change-Id: If0821a2af987b78ed8024b40d9ffa68032518b22
Reviewed-on: https://go-review.googlesource.com/12572Reviewed-by: Robert Griesemer <gri@golang.org>

Limit probe to ODOT/OIND/ODOTPTR for now; that works.

Fixes #11790

Change-Id: I411271e702c5fe6ceb880ca47c7dacc37ffcbb6a
Reviewed-on: https://go-review.googlesource.com/12532Reviewed-by: Russ Cox <rsc@golang.org>

EncodeToken takes a Token (i.e. an interface{}) as a parameter,
and expects a value of type StartElement, EndElement, CharData,
Comment, ProcInst, or Directive.

If a pointer is passed instead, or any type which does not match
this list, the token is silently ignored.

Added a default case in the type switch to issue a proper error
when the type is invalid.

The behavior could be later improved by allowing pointers to
token to be accepted as well, but not for go1.5.

Fixes #11719

Change-Id: Ifd13c1563450b474acf66d57669fdccba76c1949
Reviewed-on: https://go-review.googlesource.com/12252Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Foreign code can be arbitrarily aligned,
so the function before it can have
arbitrarily much padding.
We can't call pcvalue on values in the padding.

Fixes #11653.

Change-Id: I7d57f813ae5a2409d1520fcc909af3eeef2da131
Reviewed-on: https://go-review.googlesource.com/12550Reviewed-by: Rob Pike <r@golang.org>

Fixes #11606.

Change-Id: I70d38c22812c17119b998aad9c1c68e7cf74e98a
Reviewed-on: https://go-review.googlesource.com/12524Reviewed-by: Rob Pike <r@golang.org>

We use 127.0.0.1 instead of localhost in Go networking tests.
The reporter of #11774 has localhost defined to be 120.192.83.162,
for reasons unknown.

Also, if TestTraceSymbolize calls Fatalf (for example because Listen
fails) then we need to stop the trace for future tests to work.
See failure log in #11774.

Fixes #11774.

Change-Id: Iceddb03a72d31e967acd2d559ecb78051f9c14b7
Reviewed-on: https://go-review.googlesource.com/12521Reviewed-by: Rob Pike <r@golang.org>

Fixes #11681.

Change-Id: I679d71ed25ac585af7d43611be01c1a0c4807871
Reviewed-on: https://go-review.googlesource.com/12554
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #11729.

Change-Id: I6e5e23169ac1368afcbd016ed544a710aa045326
Reviewed-on: https://go-review.googlesource.com/12553Reviewed-by: Rob Pike <r@golang.org>

Also make the spelling consistent in asm.html

Change-Id: Ifa751eee288fe0634cd317eb827f3e408b199620
Reviewed-on: https://go-review.googlesource.com/12501Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

It wasn't working. The wrong variable was used.

This would ideally have tests. It's also DEBUG.

Fixes #11816

Change-Id: Iec42d229b81d78cece4ba5c73f3040e2356eb98f
Reviewed-on: https://go-review.googlesource.com/12544
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

When dialing with a relative Timeout instead of an absolute Deadline,
the deadline function only makes sense if called before doing any
time-consuming work.

This change calls deadline exactly once, storing the result until the
Dial operation completes.  The partialDeadline implementation is
reverted to the following patch set 3:
https://go-review.googlesource.com/#/c/8768/3..4/src/net/dial.go

Otherwise, when dialing a name with multiple IP addresses, or when DNS
is slow, the recomputed deadline causes the total Timeout to exceed that
requested by the user.

Fixes #11796

Change-Id: I5e1f0d545f9e86a4e0e2ac31a9bd108849cf0fdf
Reviewed-on: https://go-review.googlesource.com/12442
Run-TryBot: Paul Marks <pmarks@google.com>
Run-TryBot: Mikio Hara <mikioh.mikioh@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #10400.

Change-Id: Ic486cb8af4c40660fd1a2e3d10986975acba3f19
Reviewed-on: https://go-review.googlesource.com/12537Reviewed-by: Ian Lance Taylor <iant@golang.org>

This is needed to handle vendor directories correctly.  It was already
done for the regular imports when the package was loaded, but not for
the test-only imports.

It would be nice to do this while loading the package, but that breaks
the code that checks for direct references to vendor packages when
running go test.  This change is relatively contained.

While we're at it, skip "C" test imports in go get.

Fixes #11628.
Fixes #11717.

Change-Id: I9cc308cf45683e3ff905320c2b5cb45db7716846
Reviewed-on: https://go-review.googlesource.com/12488
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #11823.

Change-Id: Ic949ccb9657478f8ca34fdf1a6fe88f57db69f24
Reviewed-on: https://go-review.googlesource.com/12535Reviewed-by: Austin Clements <austin@google.com>

Updated Address.String so it restores quoted local parts, which wasn't
done before.
When parsing `<" "@example.com>`, the formatted string returned
`< @example>`, which doens't match RFC 5322, since a space is not atext.
Another example is `<"bob@valid"@example.com>` which returned
`<bob@valid@example.com>`, which is completely invalid.
I also added support for quotes and backslashes in a quoted local part.

Besides formatting a parsed Address, the ParseAddress function also
needed more testing and finetuning for special cases.
Things like `<.john.doe@example.com>` and `<john..doe@example.com>`
e.a. were accepted, but are invalid.
I fixed those details and add tests for some other special cases.

Fixes #10768

Change-Id: Ib0caf8ad603eb21e32fcb957a5f1a0fe5d1c6e6e
Reviewed-on: https://go-review.googlesource.com/8724Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #11665.

Change-Id: I0897e8cf695434e77d14dcb1d96f21747edfe37c
Reviewed-on: https://go-review.googlesource.com/12523Reviewed-by: Ian Lance Taylor <iant@golang.org>

Some routines run without and m or g and cannot invoke the
race detector runtime. They must be opaque to the runtime.
That used to be true because they were written in C.
Now that they are written in Go, disable the race detector
annotations for those functions explicitly.

Add test.

Fixes #10874.

Change-Id: Ia8cc28d51e7051528f9f9594b75634e6bb66a785
Reviewed-on: https://go-review.googlesource.com/12534Reviewed-by: Ian Lance Taylor <iant@golang.org>

Same as we do for string symbols.

Fixes #11583.

Change-Id: Ia9264f6faf486697d987051b7f9851d37d8ad381
Reviewed-on: https://go-review.googlesource.com/12531Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

Fixes #10842.

Change-Id: I7de98f3073a47911863a252b7a74d8fdaa48c86f
Reviewed-on: https://go-review.googlesource.com/12529Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

In the past badsignal would crash the program.  In
https://golang.org/cl/10757044 badsignal was changed to call sigsend,
to fix issue #3250.  The effect of this was that when a non-Go thread
received a signal, and os/signal.Notify was not being used to check
for occurrences of the signal, the signal was ignored.

This changes the code so that if os/signal.Notify is not being used,
then the signal handler is reset to what it was, and the signal is
raised again.  This lets non-Go threads handle the signal as they
wish.  In particular, it means that a segmentation violation in a
non-Go thread will ordinarily crash the process, as it should.

Fixes #10139.
Update #11794.

Change-Id: I2109444aaada9d963ad03b1d071ec667760515e5
Reviewed-on: https://go-review.googlesource.com/12503Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>

This change fixes resolution of secure (https) repo URL for
git.apache.org Git repositories.

E.g. the correct repo URL for git.apache.org/thrift.git/lib/go/thrift is
https://git.apache.org/thrift.git, not https://git.apache.org/thrift

Fixes #10797

Change-Id: I67d5312ad8620eb780e42c2e002c8f286f60645a
Reviewed-on: https://go-review.googlesource.com/10092Reviewed-by: Andrew Gerrand <adg@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #11523.

Change-Id: I172f6facd555a1c6db76f25d5097343c20dea59a
Reviewed-on: https://go-review.googlesource.com/12507Reviewed-by: Alan Donovan <adonovan@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>

It's a bad test and it's worst on uniprocessors.

Fixes #11143.

Change-Id: I0164231ada294788d7eec251a2fc33e02a26c13b
Reviewed-on: https://go-review.googlesource.com/12522Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

ae1ea2aa moved trace-related functions from runtime/pprof to
runtime/trace, but missed a doc comment and a code comment. Update
these to reflect the move.

Change-Id: I6e1e8861e5ede465c08a2e3f80b976145a8b32d8
Reviewed-on: https://go-review.googlesource.com/12525Reviewed-by: Dmitry Vyukov <dvyukov@google.com>

Change-Id: I8633a005da7d0c34a5f074fbd979c8e0fc1fba37
Reviewed-on: https://go-review.googlesource.com/12505Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

It is very useful to see which test commands are executed.
This is of global use, but I wrote it for #11654.

Change-Id: I9bfc8e55d5bef21f4c49b917f58bc9a44aefcade
Reviewed-on: https://go-review.googlesource.com/12510Reviewed-by: Russ Cox <rsc@golang.org>

https://go-review.googlesource.com/#/c/2421/ contains an unfortunate
slip where IsOnCurve is called on the CurveParams rather than the curve.
This doesn't really matter, but it's a pain for people doing tricks with
crypto/elliptic and means that 1.5 would be a regression for them
without this change.

See https://groups.google.com/forum/#!topic/golang-dev/i8OPUTYctOk

Change-Id: Ifa5f25f9a95d7484cb53d4883cfd78dc58a0f9a7
Reviewed-on: https://go-review.googlesource.com/12506Reviewed-by: Russ Cox <rsc@golang.org>

Fixes #11730.

Change-Id: I5bc60779a87dc07899dd70659a830996bf7812ca
Reviewed-on: https://go-review.googlesource.com/12527Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>