Before this CL, if max > min and max was unaligned to min, then the
function could return an unaligned (unaligned to min) region to
scavenge. On most platforms, this leads to some kind of crash.

Fix this by explicitly aligning max to the next multiple of min.

Fixes #35445.
Updates #35112.

Change-Id: I0af42d4a307b48a97e47ed152c619d77b0298291
Reviewed-on: https://go-review.googlesource.com/c/go/+/206277Reviewed-by: Ian Lance Taylor <iant@golang.org>

Test added.

Fixes #28338

Change-Id: Iab72ba5646360ae91671261161d8fda451f7a717
Reviewed-on: https://go-review.googlesource.com/c/go/+/189797
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Intrinsify these functions to match other platforms. Update the
sequence of instructions used in the assembly implementations to
match the intrinsics.

Also, add a micro benchmark so we can more easily measure the
performance of these two functions:

name            old time/op  new time/op  delta
And8-8          5.33ns ± 7%  2.55ns ± 8%  -52.12%  (p=0.000 n=20+20)
And8Parallel-8  7.39ns ± 5%  3.74ns ± 4%  -49.34%  (p=0.000 n=20+20)
Or8-8           4.84ns ±15%  2.64ns ±11%  -45.50%  (p=0.000 n=20+20)
Or8Parallel-8   7.27ns ± 3%  3.84ns ± 4%  -47.10%  (p=0.000 n=19+20)

By using a 'rotate then xor selected bits' instruction combined with
either a 'load and and' or a 'load and or' instruction we can
implement And8 and Or8 with far fewer instructions. Replacing
'compare and swap' with atomic instructions may also improve
performance when there is contention.

Change-Id: I28bb8032052b73ae8ccdf6e4c612d2877085fa01
Reviewed-on: https://go-review.googlesource.com/c/go/+/204277
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

On some platforms (currently ARM and ARM64), when calling into
VDSO we store the G to the gsignal stack, if there is one, so if
we receive a signal during VDSO we can find the G.

If we receive a signal during VDSO, and within the signal handler
we call nanotime again (e.g. when handling profiling signal),
we'll save/clear the G slot on the gsignal stack again, which
clobbers the original saved G. If we receive a second signal
during the same VDSO execution, we will fetch a nil G, which will
lead to bad things such as deadlock.

Don't save G if we're calling VDSO code from the gsignal stack.
Saving G is not necessary as we won't receive a nested signal.

Fixes #35473.

Change-Id: Ibfd8587a3c70c2f1533908b056e81b94d75d65a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/206397
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Fixes #35463

Change-Id: I29af27b77cc651395c20570943847729ff12586c
Reviewed-on: https://go-review.googlesource.com/c/go/+/206297
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Renames variables sizeof_Array and other array_* variables
that were actually intended for slices and not arrays.

Change-Id: I391b95880cc77cabb8472efe694b7dd19545f31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/180919Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

This reverts CL 129118 (commit aff3aaa4)

Reason for revert: It was retracted by the author in a comment on the PR
but that doesn't get synced to Gerrit, and the Gerrit CL wasn't closed
when the PR was closed.

Change-Id: I5ad16e96f98a927972187dc5c9df3a0e9b9fafa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/206377
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

Change-Id: I7ca075e50d144aa449a20ebfbaf7337406e1e510
Reviewed-on: https://go-review.googlesource.com/c/go/+/204161
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Change-Id: Ic1fc271589b7212e7f604ece93cfe34feff909b2
Reviewed-on: https://go-review.googlesource.com/c/go/+/204160
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Change-Id: If82ebd9cd6470863eb5de9e031e7905a66218857
Reviewed-on: https://go-review.googlesource.com/c/go/+/204159
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

This is intended to allow IDEs to note where the optimizer
was not able to improve users' code.  There may be other
applications for this, for example in studying effectiveness
of optimizer changes more quickly than running benchmarks,
or in verifying that code changes did not accidentally disable
optimizations in performance-critical code.

Logging of nilcheck (bad) for amd64 is implemented as
proof-of-concept.  In general, the intent is that optimizations
that didn't happen are what will be logged, because that is
believed to be what IDE users want.

Added flag -json=version,dest

Check that version=0.  (Future compilers will support a
few recent versions, I hope that version is always <=3.)

Dest is expected to be one of:

/path (or \path in Windows)
  will create directory /path and fill it w/ json files
file://path
  will create directory path, intended either for
     I:\dont\know\enough\about\windows\paths
     trustme_I_know_what_I_am_doing_probably_testing

Not passing an absolute path name usually leads to
json splattered all over source directories,
or failure when those directories are not writeable.
If you want a foot-gun, you have to ask for it.

The JSON output is directed to subdirectories of dest,
where each subdirectory is net/url.PathEscape of the
package name, and each for each foo.go in the package,
net/url.PathEscape(foo).json is created.  The first line
of foo.json contains version and context information,
and subsequent lines contains LSP-conforming JSON
describing the missing optimizations.

Change-Id: Ib83176a53a8c177ee9081aefc5ae05604ccad8a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/204338
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

This change makes go env -w and -u check invalid GOOS and GOARCH values and abort if that's the case.

Fixes #34194

Change-Id: Idca8e93bb0b190fd273bf786c925be7993c24a2b
GitHub-Last-Rev: ee67f09d75f4552001cb8b6506bc4af0894c9b05
GitHub-Pull-Request: golang/go#34221
Reviewed-on: https://go-review.googlesource.com/c/go/+/194617
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

The variable now implies that the next tick always
returns the current time which is not always the case.
Change it to next to clarify that it returns
the time of the next tick which is more appropriate.

Fixes #30271

Change-Id: Ie7719cb8c7180bc6345b436f9b3e950ee349d6e4
Reviewed-on: https://go-review.googlesource.com/c/go/+/206123Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

This change makes the test addresses start at 1 GiB instead of 2 GiB to
support mips and mipsle, which only have 31-bit address spaces.

It also changes some tests to use smaller offsets for the chunk index to
avoid jumping too far ahead in the address space to support 31-bit
address spaces. The tests don't require such large jumps for what
they're testing anyway.

Updates #35112.
Fixes #35440.

Change-Id: Ic68ff2b0a1f10ef37ac00d4bb5b910ddcdc76f2e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205938
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

os.OpenFile was assuming that a failed syscall.Open means the file does
not exist and it tries to create it. However, syscall.Open may have
failed for some other reason, such as failing to lock a os.ModeExclusive
file. We change os.OpenFile to only create the file if the error
indicates that the file doesn't exist.

Remove skip of TestTransform test, which was failing because sometimes
syscall.Open would fail due to the file being locked, but the
syscall.Create would succeed because the file is no longer locked. The
create was truncating the file.

Fixes #35471

Change-Id: I06583b5f8ac33dc90a51cc4fb64f2d8d9c0c2113
Reviewed-on: https://go-review.googlesource.com/c/go/+/206299Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Setting InsecureSkipVerify and VerifyPeerCertificate is the recommended
way to customize and override certificate validation.

However, there is boilerplate involved and it usually requires first
reimplementing the default validation strategy to then customize it.
Provide an example that does the same thing as the default as a starting
point.

Examples of where we directed users to do something similar are in
issues #35467, #31791, #28754, #21971, and #24151.

Fixes #31792

Change-Id: Id033e9fa3cac9dff1f7be05c72dfb34b4f973fd4
Reviewed-on: https://go-review.googlesource.com/c/go/+/193620Reviewed-by: Adam Langley <agl@golang.org>

When we have already assigned the semaphore ticket to a specific
waiter, we want to get the waiter running as fast as possible since
no other G waiting on the semaphore can acquire it optimistically.

The net effect is that, when a sync.Mutex is contended, the code in
the critical section guarded by the Mutex gets a priority boost.

Fixes #33747

The original work was done in CL 200577 by Carlo Alberto Ferraris. The
change was reverted in CL 205817 because it broke the linux-arm64-packet
and solaris-amd64-oraclerel builders.

Change-Id: I76d79b1d63fd206ed1c57fe6900cb7ae9e4d46cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/206180
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

On MIPS, Linux returns whether the syscall had an error in a separate
register (R7), not using a negative return value as on other
architectures. Thus, skip TestSyscallNoError as there is no error case
for syscall.RawSyscall which it could test against.

Also reformat the error output so the expected and gotten values are
aligned so they're easier to compare.

Fixes #35422

Change-Id: Ibc88f7c5382bb7ee8faf15ad4589ca1f9f017a06
Reviewed-on: https://go-review.googlesource.com/c/go/+/205898
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

This restores intrinsic status to functions copied from math/bits
into runtime/internal/sys, as an aid to runtime performance.

Updates #35112.

Change-Id: I41a7d87cf00f1e64d82aa95c5b1000bc128de820
Reviewed-on: https://go-review.googlesource.com/c/go/+/206200
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

Now that the runtime can send preemption signals, it is possible that
a channel that asks for all signals can see both SIGURG and SIGHUP
before reading either, in which case one of the signals will be dropped.
We have to use a larger buffer so that the test see the signal it expects.

Fixes #35466

Change-Id: I36271eae0661c421780c72292a5bcbd443ada987
Reviewed-on: https://go-review.googlesource.com/c/go/+/206257
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

CL 201765 activated calls from the runtime to functions in math/bits.
When coverage and race detection were simultaneously enabled,
this caused a crash when the covered+race-checked code in
math/bits was called from the runtime before there was even a P.

PS Win for gdlv in helping sort this out.

TODO - next CL intrinsifies the new functions in
runtime/internal/sys

TODO/Would-be-nice - Ctz64 and TrailingZeros64 are the same
function; 386.s is intrinsified; clean all that up.

Fixes #35461.
Updates #35112.

Change-Id: I750a54dba493130ad3e68a06530ede7687d41e1d
Reviewed-on: https://go-review.googlesource.com/c/go/+/206199Reviewed-by: Michael Knyszek <mknyszek@google.com>
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>

Enables insecure fetching of dependencies whos path matches those specified in
the enironment variable GOINSECURE.

Fixes #32966

Change-Id: I378920fbd5a4436df0b5af3fb5533e663e2cc758
GitHub-Last-Rev: 2c87b303acbe86e273bd0b8514e338d34794b0d6
GitHub-Pull-Request: golang/go#35357
Reviewed-on: https://go-review.googlesource.com/c/go/+/205238
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>

Updates #35471

Change-Id: Ie06c442e405a267eb909621e1205444b6a00fda1
Reviewed-on: https://go-review.googlesource.com/c/go/+/206197
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David du Colombier <0intro@gmail.com>

Previously langSupported applied -lang as though it's a global
restriction, but it's actually a per-package restriction. This CL
fixes langSupported to take a *types.Pkg parameter to reflect this and
updates its callers accordingly.

This is relevant for signed shifts (added in Go 1.12), because they
can be inlined into a Go 1.11 package; and for overlapping interfaces
(added in Go 1.13), because they can be exported as part of the
package's API.

Today we require all Go packages to be compiled with the same
toolchain, and all uses of langSupported are for controlling
backwards-compatible features. So we can simply assume that since the
imported packages type-checked successfully, they must have been
compiled with an appropriate -lang setting.

In the future if we ever want to use langSupported to control
backwards-incompatible language changes, we might need to record the
-lang flag used for compiling a package in its export data.

Fixes #35437.
Fixes #35442.

Change-Id: Ifdf6a62ee80cd5fb4366cbf12933152506d1b36e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205977Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>

Unlike function calls, when processing instructions that directly
fault we must not subtract 1 from the pc before looking up the
file/line information.

Since the file/line lookup unconditionally subtracts 1, add 1 to
the faulting instruction PCs to compensate.

Fixes #34123

Change-Id: Ie7361e3d2f84a0d4f48d97e5a9e74f6291ba7a8b
Reviewed-on: https://go-review.googlesource.com/c/go/+/196962
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>

Changing the Import function to return a PackageNotInModuleError if no
package was found in a local module. This replacing the vague message
"missing dot in first path element" you get today with much more friendly
one - "module was found, but does not contain package".

Fixes #35273

Change-Id: I6d726c17e6412258274b10f58f76621617d26e0a
Reviewed-on: https://go-review.googlesource.com/c/go/+/203118Reviewed-by: Bryan C. Mills <bcmills@google.com>
Run-TryBot: Bryan C. Mills <bcmills@google.com>

Fixes #35423

Change-Id: Idb254d6a2c4b147d20e290411e4380df5cdcb306
Reviewed-on: https://go-review.googlesource.com/c/go/+/206178
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>

This adds pipe/pipe2 on Solaris as they exist on other Unix systems.
They were not added previously because Solaris does not need them
for netpollBreak. They are added now in preparation for using pipes
in TestSignalM.

Updates #35276

Change-Id: I53dfdf077430153155f0a79715af98b0972a841c
Reviewed-on: https://go-review.googlesource.com/c/go/+/206077
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #35338

Change-Id: Ic2a3a446ef56b1e5723d6192c8aeec32ae0bbeac
Reviewed-on: https://go-review.googlesource.com/c/go/+/205779
Run-TryBot: Baokun Lee <nototon@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

Support "gzip" aka "x-gzip" as a transfer-encoding for
requests and responses as per RFC 7230 Section 3.3.1.

"gzip" and "x-gzip" are equivalents as requested by
RFC 7230 Section 4.2.3.

Transfer-Encoding is an on-fly property of the body
that can be applied by proxies, other servers and basically
any intermediary to transport the content e.g. across data centers
or backends/machine to machine that need compression.

For this change, "gzip" is both explicitly and implicitly combined
with transfer-encoding "chunked" in an ordering such as:

    Transfer-Encoding: gzip, chunked

and NOT

    Transfer-Encoding: chunked, gzip

Obviously the latter form is counter-intuitive for streaming.
Thus "chunked" is the last value to appear in that transfer-encoding header,
if explicitly included.

When parsing the response, the chunked body is concatenated as "chunked" does,
before finally being decompressed as "gzip".

A chunked and compressed body would typically look like this:

<LENGTH_1>\r\n<CHUNK_1_GZIPPED_BODY>\r\n<LENGTH_2>\r\n<CHUNK_2_GZIPPED_BODY>\0\r\n

which when being processed we would contentate

    <FULL_BODY>  := <CHUNK_1_GZIPPED_BODY> + <CHUNK_2_GZIPPED_BODY> + ...

and then finally gunzip it
    <FINAL_BODY> := gunzip(<FULL_BODY>)

If a "chunked" transfer-encoding is NOT applied but "gzip" is applied,
we implicitly assume that they requested using "chunked" at the end.
This is as per the recommendation of RFC 3.3.1. which explicitly says
that for:

* Request:
"  If any transfer coding
   other than chunked is applied to a request payload body, the sender
   MUST apply chunked as the final transfer coding to ensure that the
   message is properly framed."

* Response:
"  If any transfer coding other than
   chunked is applied to a response payload body, the sender MUST either
   apply chunked as the final transfer coding or terminate the message
   by closing the connection."

RELNOTE=yes

Fixes #29162

Change-Id: Icb8b8b838cf4119705605b29725cabb1fe258491
Reviewed-on: https://go-review.googlesource.com/c/go/+/166517
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

This reverts CL 160819 (commit 4692343c)

Reason for revert: causing lots of failures on master

Change-Id: I96fd39ae80fe350ba8b3aa310443d41daec38093
Reviewed-on: https://go-review.googlesource.com/c/go/+/206146Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #28957

Change-Id: Ie8ba841bd4ee71766bcfbbfbdc9173b9be867ed1
Reviewed-on: https://go-review.googlesource.com/c/go/+/151479Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #35376

Change-Id: Ib95ad336425e73cc4d412dafed0ba5e0a8130bd2
Reviewed-on: https://go-review.googlesource.com/c/go/+/205718
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>

This adds float type support to the main switch blocks in Read and
Write, instead of falling back to reflection. This gives a considerable
speedup for the float types:

ReadFloats-8                 129ns ± 9%       70ns ± 8%   -46.02%  (p=0.001 n=7+7)
WriteFloats-8                131ns ± 6%       86ns ±11%   -34.59%  (p=0.001 n=7+7)
ReadSlice1000Float32s-8     14.6µs ±14%      4.8µs ±12%   -67.29%  (p=0.001 n=7+7)
WriteSlice1000Float32s-8    16.4µs ±20%      4.7µs ± 8%   -71.01%  (p=0.001 n=7+7)

Change-Id: I0be99d068b07d10dd6eb1137b45eff6f7c216b87
GitHub-Last-Rev: 4ff326e99ca35977d819f0ba29c10d9efc7e811c
GitHub-Pull-Request: golang/go#31803
Reviewed-on: https://go-review.googlesource.com/c/go/+/174959Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

pregrow result array to avoid small allocation.

Change-Id: Ife5f815efa4c163ecdbb3a4c16bfb60a484dfa11
Reviewed-on: https://go-review.googlesource.com/c/go/+/174706Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Fixes #27426

Change-Id: I34d4784658ce7b9e6130bae9717e80d0e9a290a2
GitHub-Last-Rev: 6de610cdcef11832f131b84a0338b68af16b10da
GitHub-Pull-Request: golang/go#30059
Reviewed-on: https://go-review.googlesource.com/c/go/+/160819Reviewed-by: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>

Share a slice backing between the host address, network ip and mask.
Add tests to verify that each slice header has len==cap to prevent
introducing new behavior into Go programs. This has a small tradeoff
of allocating a larger slice backing when the address is invalid.
Earlier error detection of invalid prefix length helps balance this
cost and a new benchmark for ParseCIDR helps measure it.

This yields a ~22% speedup for all nil err cidr tests:

  name               old time/op    new time/op    delta
  ParseCIDR/IPv4-24    9.17µs ± 6%    7.20µs ± 7%  -21.47%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24    9.02µs ± 6%    6.95µs ± 9%  -23.02%  (p=0.000 n=20+20)
  ParseCIDR/IPv4-24    1.51kB ± 0%    1.55kB ± 0%   +2.65%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24    1.51kB ± 0%    1.55kB ± 0%   +2.65%  (p=0.000 n=20+20)
  ParseCIDR/IPv4-24      68.0 ± 0%      34.0 ± 0%  -50.00%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24      68.0 ± 0%      34.0 ± 0%  -50.00%  (p=0.000 n=20+20)

Including non-nil err cidr tests gains around 25%~:

  name               old time/op    new time/op    delta
  ParseCIDR/IPv4-24    11.8µs ±11%     8.9µs ± 8%  -24.88%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24    11.7µs ± 7%     8.7µs ± 5%  -25.93%  (p=0.000 n=20+20)
  ParseCIDR/IPv4-24    1.98kB ± 0%    2.00kB ± 0%   +1.21%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24    1.98kB ± 0%    2.00kB ± 0%   +1.21%  (p=0.000 n=20+20)
  ParseCIDR/IPv4-24      87.0 ± 0%      48.0 ± 0%  -44.83%  (p=0.000 n=20+20)
  ParseCIDR/IPv6-24      87.0 ± 0%      48.0 ± 0%  -44.83%  (p=0.000 n=20+20)

Change-Id: I17f33c9049f7875b6ebdfde1f80b386a7aef9b94
GitHub-Last-Rev: 0a031f44b458e2c6465d0e59fb4653e08c44a854
GitHub-Pull-Request: golang/go#26948
Reviewed-on: https://go-review.googlesource.com/c/go/+/129118Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Use names to better communicate when a test case fails.

Change-Id: Id882783cb5e444b705443fbcdf612713f8a3b032
Reviewed-on: https://go-review.googlesource.com/c/go/+/187823Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>

Without this CL, one of the TestDebugCall tests would fail 1% to 2% of
the time on the android-amd64-emu gomote. With this CL, I ran the
tests for 1000 iterations with no failures.

Fixes #32985

Change-Id: I541268a2a0c10d0cd7604f0b2dbd15c1d18e5730
Reviewed-on: https://go-review.googlesource.com/c/go/+/205248
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>