Don't peek at RTA_DATA() directly.

Now everything is prepared for it, so the patch is straightforward.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

That is -- write the code, that sends diag request in new format. It's
mostly copied from tcp-diag code. Plus, sock-diag differentiates sockets
by families, thus we have to send two requests sequentially.

If we fail to submit new sock-diag request, try to fall-back and submit
the legacy tcp-diag one.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The existing function inet_show_netlink sends tcp-diag request and
then receives back the response and prints it on the screen.

The sock-diag and legacy tcp-diag have different request types, but
report sockets in the same format. In order to support both it's
convenient to split the code into sending and receiving parts.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The sock-diag is capable to diag udp sockets as well. Prepare the
ss code for this by first renaming soon-to-be-generic tcp-s names
into inet-s.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Also sort link types for clarity

Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example

 $ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
 $ ip link add link ib0.1 name ib0.1 type ipoib mode connected
 $ ip --details link show dev ib0.1

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>

Get new sanitized headers

Don't send 0 as group address.

ip tcp_metrics/tcpmetrics

	We support get/del for single entry and dump for
show/flush.

v3:
 - fix rtt/rttvar shifts as suggested by Eric Dumazet
 - show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>

When running 'ip monitor neigh', there is no hint to tell if a neighbor is
updated or deleted.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Conflicts:
	include/linux/if_link.h

Hi,

When compiling iproute2-3.6.0 on a host that doesn't have iptables available, I get the following error:

gcc -Wall -Wstrict-prototypes -O2 -I../include -DRESOLVE_HOSTNAMES
-DLIBDIR=\"/usr/lib\" -DCONFDIR=\"/etc/iproute2\" -D_GNU_SOURCE
-DCONFIG_GACT -DCONFIG_GACT_PROB -DYY_NO_INPUT   -c -o em_ipset.o
em_ipset.c
em_ipset.c:26:21: fatal error: xtables.h: No such file or directory

Fixed by the following patch, which guards the building of em_ipset.o on
the presence of suitable headers.

Thanks,

Matt.

Get latest headers from merge

This fixes regression in iproute2-3.5.1 when `ip addr show' skipped
interfaces without network layer address.

Wrong output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:54:00:0f:03 brd ff:ff:ff:ff:ff:ff
    inet 10.34.25.198/23 brd 10.34.25.255 scope global eth0
    inet6 2620:52:0:2219:250:54ff:fe00:f03/64 scope global dynamic
       valid_lft 2591919sec preferred_lft 604719sec
    inet6 fe80::250:54ff:fe00:f03/64 scope link
       valid_lft forever preferred_lft forever

Expected output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:50:54:00:0f:03 brd ff:ff:ff:ff:ff:ff
    inet 10.34.25.198/23 brd 10.34.25.255 scope global eth0
    inet6 2620:52:0:2219:250:54ff:fe00:f03/64 scope global dynamic
       valid_lft 2591896sec preferred_lft 604696sec
    inet6 fe80::250:54ff:fe00:f03/64 scope link
       valid_lft forever preferred_lft forever
5: veth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 8a:ec:35:34:1f:a8 brd ff:ff:ff:ff:ff:ff
6: veth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 2e:97:ef:77:40:82 brd ff:ff:ff:ff:ff:ff
Signed-off-by: Petr Písař <ppisar@redhat.com>

Can no manage interfaces with ip no need to invoke old brctl

Allow extending bridge forwarding table to handle VXLAN as well.
Change format of output to be close to 'ip neighbour'

 Currently the pdf docs are done with
    sgml -> sgmltool -> tex -> latex -> dvi -> dvips -> ps -> ps2pdf -> pdf
 or
    tex -> latex -> dvi -> dvips -> ps -> ps2pdf -> pdf
 with this patch we do
    sgml -> sgmltool -> tex -> pdflatex -> pdf
 or
    tex -> pdflatex -> pdf

This can be useful when displaying neighbour table

	Both macros are used together, so better to have
single define. Update all requests in ipl2tp.c to use the
new macro.
Signed-off-by: Julian Anastasov <ja@ssi.bg>

This patch finishes removing the replace option from the bridge
man page which I missed in this commit

commit 57b9785d
Author: John Fastabend <john.r.fastabend@intel.com>
Date:   Mon Aug 27 10:52:31 2012 -0700

    iproute2: bridge: remove replace and change options

Also add documentation for "{ self | embedded }" already shown on
the cmd line help msg.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>

This functionality is required by checkpoint-restore project. Since the
dump and restore for routes is already done in ip tool it's naturally to
dump and restore addresses in the ip tool as well.

The implementation logic is the same as for the respective one for routes.
The magic number digits are taken from the Seattle coordinates.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

Use the common code from libgenl.c to parse family, and initialize
structures.
Signed-off-by: Julian Anastasov <ja@ssi.bg>

Create libgenl.h and libgenl.c. They will contain
common code for GENL users such as ipl2tp, tcp_metrics, etc.

Somewhat simplified by Stephen Hemminger
Signed-off-by: Julian Anastasov <ja@ssi.bg>

- rename section UNITS to PARAMETERS.
- break section PARAMETERS down to four subsections to cover the
  common used parameter types(RATES, TIMES, SIZES, VALUES).
- add some explaination for IEC units in RATES.
- point out the max value we can set for RATES, TIMES and SIZES.
Signed-off-by: Li Wei <lw@cn.fujitsu.com>

Some time ago the save+restore commands were added to ip route (git
id f4ff11e3, Add ip route save/restore). These two save the raw rtnl
stream into a file and restore one (reading it from stdin).

The problem is that there's no way to get the contents of the dump
file in a human readable form. The proposal is to add a command that
reads the rtnl stream from stdin and prints the data in a way the
usual "ip route list" does?

changes since v1:

* Take the magic at the beginning of the dump file into account
* Check for stdin (the dump is taken from) is not a tty
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

In order to somehow verify that a blob contains route dump a
4-bytes magic is put at the head of the data and is checked
on restore.

Magic digits are taken from Portland (OR) coordinates :) Is
there any more reliable way of generating such?
Signed-of-by: Pavel Emelyanov <xemul@parallels.com>

Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>

Commit e557d1ac ("Don't put configure files in /tmp") introduced a typo
that prevented automated cleanup of the temporary directory created for
feature testing. Fix this typo.
Signed-off-by: Mathias Krause <minipli@googlemail.com>

Replace and change are not supported by bridge netlink so remove it
from bridge tool options.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>

After latest commit 'Install all tc and ip sub pages' this error
occurs on make.

make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/git/kernel.org/iproute2/man/man3'
make[2]: Entering directory `/home/git/kernel.org/iproute2/man/man8'
Makefile:8: *** commands commence before first target.  Stop.
make[2]: Leaving directory `/home/git/kernel.org/iproute2/man/man8'
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>

Add missing entries in Makefile