The man page for ip command had grown too large to be readable.
Break it up into separate pages.

With help from Eric Dumazet.
Man page is derived in parts from README file contained in
Juliusz Chroboczeks original sfb kernel patch.

Add harddrop support (kernel support added a long time ago), and various
cleanups.

min BYTES, max BYTES are now optional and follow Sally Floyd's
recommendations.

By the way, our default 2% probability is a bit low, Sally recommends 10%.
Not a big deal if upcoming adaptative algo is deployed.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>

Documentation advises to set burst to (min+min+max)/(3*avpkt)

Let tc do this automatically if user doesnt provide burst himself.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>

Check for burst values that are too small.
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>

Add ip link command parsing for VF spoof checking enable/disable

V2 - Fixed problem with parsing of dump info on kernels that don't
     support the spoof checking option and also wrapped the ifla_vf_info
     structure in #ifdef __KERNEL__ to prevent user space from directly
     accessing the structure
V3 - Improved parsing of vfinfo
V4 - Put Makefile back to proper list of subdirs
V5 - Remove struct ifla_vf_info, it is only used by the kernel
V6 - Make sure spoof check is reported by the driver - rtnl will set
     it to -1 to indicate driver didn't report a value.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Support ECNSEEN reporting in ss command.

ESTAB      0      0           10.170.73.123:4900
10.170.73.125:51001    uid:501 ino:385994 sk:f31e5f00
         mem:(r0,w0,f0,t0) ts sack ecn ecnseen bic wscale:8,8 rto:210
rtt:18.75/15 ato:40 cwnd:10 send 69.9Mbps rcv_space:32768

"ecn" means TCP session negociated ECN capability (TCP layer) at setup
time

"ecnseen" at least one frame with ECT(0) or ECT(1) or ECN (IP layer) was
received from peer.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>

get_distribution() returns an int.

cppcheck reported:
[tc/q_netem.c:243]: (style) Checking if unsigned variable 'dist_size' is less than zero.

The mismatch actually rendered the error checking
after get_distribution() ineffective.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

This patch emulates 'netstat -ul' behavior, showing 'closed'
(state 07) UDP sockets when ss is called with '-ul' options.
Although dirty, this seems like the least invasive way to fix
it and shouldn't really break anything.
Signed-off-by: Petr Šabata <contyk@redhat.com>

make clean needs to remove all the yacc output files for ematch.

Few minor changes and small additions.

This patch adds detailed documentation for HFSC scheduler. It roughly
follows HFSC paper, but tries to not rely too much on math side of things.
Post-paper/Linux specific subjects (timer resolution, ul service curve, etc.)
are also discussed.

I've read it many times over, but it's a lengthy chunk of text - so try
to be understanding in case I made some mistakes.

tc-hfsc(7): explains algorithm in detail (very long)
tc-hfsc(8): explains command line options briefly
tc(8): adds references to new man pages
Makefile: adds man7 directory to install target
q_hfsc.c: minimal help text changes, consistency with tc-hfsc(8)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Building iproute2 in parallel might hit the race failure:
	emp_ematch.l:2:30: fatal error: emp_ematch.yacc.h:
		No such file or directory
	make[1]: *** [emp_ematch.lex.o] Error 1

This is because we currently allow the yacc/lex files to generate and
compile in parallel.  So add a simple dependency to make sure yacc has
finished before we attempt to compile the lex output.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Alternative fix to problem reported by: Bin Li
The issue is came from https://bugzilla.novell.com/show_bug.cgi?id=681952.

In any previous version (since suse ... 10.0?), ip addr add always returned
the error code 2 in case the ip address is already set on the interface:

    inet 172.16.2.3/24 brd 172.16.2.255 scope global bond0
RTNETLINK answers: File exists
2

On 11.4, it returns the exit code 254:

    inet 172.16.1.1/24 brd 172.16.1.255 scope global eth0
RTNETLINK answers: File exists
254

This of course causes ifup to return an error in this quite common case..

Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Align header files with sanitized version of headers in kernel.

Fix usage of ".R" which is not man macro.

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

When changing ip6ip6 parameters (ip -6 tun change), ip passes zeroed
struct ip6_tnl_parm to the kernel. The kernel then tries to change all of
the tunnel parameters to the passed values, including zeroing of local and
remote address. This fails (-EEXIST in net/ipv6/ip6_tunnel.c:ip6_tnl_ioctl).

For other tunnel types, ip fetches the current parameters first and applies
the required changes on top of them. This patch applies the same code as in
ip/iptunnel.c to ip/ip6tunnel.c.

See http://bugzilla.redhat.com/730627 for the original bug report.
Signed-off-by: Jiri Benc <jbenc@redhat.com>

Detected by cppcheck.
Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com>

Add bridge as a supported type with 'ip link' in usage and all the missing
types in 'ip' man page. Also fixed some typos.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

Signed-off-by: Petr Sabata <contyk@redhat.com>

Signed-off-by: Petr Sabata <contyk@redhat.com>

Signed-off-by: Petr Sabata <contyk@redhat.com>

Add some documentation about ip neighbour table parameter command.