Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Phil Sutter <phil@nwl.cc>

Add missing spaces around operators to increase readability. Aside from
that, make "preference" match a real synonym for "tos" and "dsfield" as
it's effect was identical to them.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This fixes a few syntax errors and changes route filter help text to use
classid instead of flowid to be consistent with other filters' help
texts.
Signed-off-by: Phil Sutter <phil@nwl.cc>

If get_rt_realms() fails, try to get a possible raw u32 realms
value for the u32 RTA_FLOW/FRA_FLOW attribute, as it might be
useful to directly configure the hex value itself. And only if
that fails, then bail out.

The source realm is provided in the upper u16 (mask: 0xffff0000)
and the destination realm through the lower u16 part (mask:
0x0000ffff). This can be useful for tc's bpf realm matcher, but
also a full hex/mask param can be provided already for matching
through iptables' --realm cmdline option, for example.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Track upstream

This patch adds save and restore commands to "ip rule"
similar the same is made in commit f4ff11e3 for "ip route".

The feature is useful in checkpoint/restore for container
migration, also it may be helpful in some normal situations.
Signed-off-by: Kirill Tkhai <ktkhai@odin.com>

replace exit with return -2 on rtnl_talk failure
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

This patch adds fflush in fdb and mdb print functions
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

This has been inconsistent since the beginning of Git and seems to be
merely a documentation leftover, therefore just remove it from help
output and man page.
Signed-off-by: Phil Sutter <phil@nwl.cc>

When getopt_long encounters an option which has not been registered, it
returns '?'. React upon that and call usage() instead of help() so ss
returns with a non-zero exit status.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

It helps to grep for one string "Deleted" when monitoring all events.

Fixes: 6ea3ebaf ("iproute2: inform user when a neighbor is removed")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

This patch introduces two new api's rta_nest and rta_nest_end to
nest attributes inside a rta attribute represented by 'struct rtattr'
as required to construct a nexthop. Also adds rta_addattr* variants
for u8, u16 and u64 as needed to support encapsulation.
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Jiri Benc <jbenc@redhat.com>

I've updated Jose's patch to make it slightly simpler (eg: calloc instead
of malloc+memset), and ported it to 4.2.0 which requires it as well, and
attached it to this e-mail.

I can confirm that with this patch 4.1.1 doesn't segfault on me anymore.
The commit message should be reworked I guess though everything's in it
and I didn't want to modify his description.

Can it be merged as-is or should I reword the commit message and reference
Jose as the fix reporter ? We should not let this bug live forever.

From: "j.ps@openmailbox.org" <j.ps@openmailbox.org>

Essentially all that is needed to get rid of this issue is the
addition of:

    memset(u, 0, sizeof(*u));

after:

    if (!(u = malloc(sizeof(*u))))
            break;

Also patched some other situations (strcpy and sprintf uses) that
potentially produce the same results.
Signed-off-by: Jose P Santos <j.ps@openmailbox.org>

[ wt: made Jose's patch slightly simpler, all credits to him for the diag ]
Signed-off-by: Willy Tarreau <w@1wt.eu>

Signed-off-by: Phil Sutter <phil@nwl.cc>

This flag is allowed for devices in passthru mode to prevent forcing the
underlying interface into promiscuous mode.
Signed-off-by: Phil Sutter <phil@nwl.cc>

After eliminating the minor differences in both files which existed
solely because features/fixes were applied to only one of them and not
the other, the remaining differences were in function naming and error
messages. The latter is addressed by using the 'id' field of struct
link_util.

Fold both files into one in order to share common code and eliminate the
chance of having fixes/enhancements applied to only one of them.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This patch documents bridge and ip -timestamp option
Signed-off-by: Satish Ashok <sashok@cumulusnetworks.com>

This patch adds support to batch bridge commands.
Follows ip batch code.
Signed-off-by: Wilson Kok <wkok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: Christophe Gouault <christophe.gouault@6wind.com>

Support quoting strings with " or ' in an iproute2 batch file.

Enables to configure empty crypto keys (for ESP-null) or keys with
spaces:

    xfrm state add src 1.1.1.1 dst 2.2.2.2 proto ah spi 0x1 \
        mode tunnel auth hmac(sha1) "r4ezR/@kd6'749f2 6zf$"

    xfrm state add src 5.5.5.5 dst 2.2.2.2 proto esp spi 0x2 \
        mode tunnel enc cipher_null ""
Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com>

Device names that match "help" or a prefix thereof should be allowed anywhere
a device name can be used. Note that a suitable keyword ("dev" or "name", the
latter for "ip tunnel") has to be used in these cases to resolve ambiguities.
Signed-off-by: Christoph Schulz <develop@kristov.de>
Reported-by: Leonhard Preis <leonhard@pre.is>
Reported-by: Wilhelm Wijkander <lists@0x5e.se>

This patch adds man pages for the TIPC tool. There is one main page
and one page for each top level sub-command. These pages mainly aims
to help a user of the tipc tool. In addition to this they describe
a bit about what TIPC is and some of its features as a protocol.
Signed-off-by: Richard Alpe <richard.alpe@ericsson.com>
Reviewed-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>

linux-3.19 fq packet scheduler got a new attribute, controlling
number of 'flows' holding packets not attached to a socket
(forwarding usage)

kernel commit is 06eb395fa9856b5a87cf7d80baee2a0ed3cdb9d7
("pkt_sched: fq: better control of DDOS traffic")

This patch adds corresponding code to tc command.

tc qd replace dev eth0 root fq orphan_mask 511
Signed-off-by: Eric Dumazet <edumazet@google.com>

Commit 1527a17e introduced a change where the second of two ssfilter_parse()
calls in ss.c was moved outside of a conditional block (ss.c: ~3575). This
commit enabled the parsing of services, such as 'sport = :ssh', but
inadvertently broke the '-F' file-based filtering:

Partially based on kernel Kconfig help text, code comments and
git commit messages from Eric Dumazet.

Joint work with Phil Sutter.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>

Support -timestamp and -tshort options for tc monitor like ip monitor.

# tc -tshort monitor
[2015-09-23T16:39:11.260555] qdisc fq 8003: dev eth0 root refcnt 2 limit
10000p flow_limit 100p buckets 1024 quantum 3028 initial_quantum 15140
refill_delay 40.0ms
Signed-off-by: Eric Dumazet <edumazet@google.com>

The brief format does not honer the master and type filters:

$ ip link show master vrf-mgmt
7: dummy0: <BROADCAST,NOARP,SLAVE> mtu 1500 qdisc noop master vrf-mgmt state DOWN mode DEFAULT group default qlen 1000
    link/ether 66:39:cc:2b:e9:bd brd ff:ff:ff:ff:ff:ff

$ ip -br link show master vrf-mgmt
lo               UNKNOWN        00:00:00:00:00:00 <LOOPBACK,UP,LOWER_UP>
eth0             UP             08:00:27:de:14:c8 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth1             UP             08:00:27:87:02:f1 <BROADCAST,MULTICAST,UP,LOWER_UP>
eth2             UP             08:00:27:61:1e:fd <BROADCAST,MULTICAST,UP,LOWER_UP>
vrf-blue         UNKNOWN        a6:3f:09:34:7e:74 <NOARP,MASTER,UP,LOWER_UP>
vrf-red          DOWN           fe:a2:2d:e1:bc:ac <NOARP,MASTER>
dummy0           DOWN           66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
dummy1           DOWN           4a:4f:13:91:64:b1 <BROADCAST,NOARP,SLAVE>
dummy2           DOWN           b2:4f:b6:cd:bd:a6 <BROADCAST,NOARP>
dummy3           DOWN           1e:06:3d:40:b8:c2 <BROADCAST,NOARP,SLAVE>
vrf-mgmt         DOWN           ce:b2:74:41:21:df <NOARP,MASTER>

With this patch the expected output is shown:

$ ip -br link show master vrf-mgmt
dummy0           DOWN           66:39:cc:2b:e9:bd <BROADCAST,NOARP,SLAVE>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>

Currently when we specify AF_INET6 when it is disabled, we will get
all routes.

For example, we can boot kernel with ipv6.disable=1 and try to get ipv6
routes:
$ ip -6 route show
default via 192.168.122.1 dev eth0  proto static  metric 100
192.168.122.0/24 dev eth0  proto kernel  scope link  src 192.168.122.141  metric 100

Here are ipv4 routes and this is unexpected behaviour.
Signed-off-by: Andrew Vagin <avagin@openvz.org>

Changed HRB -> HTB.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Jeremy Harris <jgh@redhat.com>

Code to parse and export this tuneable via netlink is already present in
sched_fq.c of the kernel, so not making it accessible for users would be
a waste of resources.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Some qdiscs still lack a manpage, so listing them here is the only way
for a user to get to know them. For the others, this serves as an
overview of what is there.

Content was taken over from the dedicated manpage if available and
suitable, so there is definitely room for improvement at least by
adjusting it more to the context in which it is now. In case there
wasn't appropriate wording available, I tried to identify key aspects of
the given qdisc.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Commit 05325552 ('Support "ip link add help" for rtnl_link API') added a
check for specified help parameter. Though due to the place where it has
been added to, it is not possible anymore to force a given parameter to
be interpreted as interface name by prefixing it with 'dev '. Fix this
by forcing whatever follows 'dev' to be presumed as interface name.
Signed-off-by: Phil Sutter <phil@nwl.cc>