This patch fixes some of the typos found in iproute2
documentation.
Signed-off-by: Petr Šabata <contyk@redhat.com>

Don't call ll_init_map on modify operations
Saves significant overhead with 1000's of devices.

Make ll_ functions faster by having a name hash, and allow
for deletion. Also, allow them to work without calling ll_init_map.

When this flag is set, it means that dump was interrupted and result may be
inconsistent.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Quotation marks are now used only to indicate literal text on the
command line.
Signed-off-by: David Ward <david.ward@ll.mit.edu>

Change ALGO-KEY to ALGO-KEYMAT to make it more obvious that the
keying material might need to contain more than just the key (such
as a salt or nonce value).

List the algorithm names that currently exist in the kernel.

Indicate that for IPComp, the Compression Parameter Index (CPI) is
used as the SPI.

Group the list of mode values by transform protocol.
Signed-off-by: David Ward <david.ward@ll.mit.edu>

Compression algorithms do not use a key.
Signed-off-by: David Ward <david.ward@ll.mit.edu>

Signed-off-by: David Ward <david.ward@ll.mit.edu>

Ensure that only algorithms and modes supported by the transform
protocol are specified (so that errors are more obvious).
Signed-off-by: David Ward <david.ward@ll.mit.edu>

AEAD algorithms perform both encryption and authentication; they are
not combined with separate encryption or authentication algorithms.
Signed-off-by: David Ward <david.ward@ll.mit.edu>

A Security Policy Index (SPI) is not used with Mobile IPv6. IPComp
uses a smaller 16-bit Compression Parameter Index (CPI) which is
passed as the SPI value. Perform checks whenever specifying an ID.
Signed-off-by: David Ward <david.ward@ll.mit.edu>

Add documentation about the new l2spec_type parameter for "ip l2tp add
session".
Signed-off-by: James Chapman <jchapman@katalix.com>

When unmanaged L2TP sessions are created using "ip l2tp add session",
there is no option to allow the session's Layer2SpecificHeader type to
be selected - the kernel's default setting is always used. For
interopability with some vendor equipment, it might be necessary to
use a different setting. So add a new l2spec_type parameter to the "ip
l2tp add session" parameter list, allowing operators to set a specific
Layer2SpecificHeader type. The kernel already exposes the setting as a
netlink attribute so it is straightforward to add support for it in
iproute2.

This change allows unmanaged L2TP sessions to be configured between
Linux and some Cisco equipment by specifying "l2spec_type none" in "ip
l2tp add session" command parameters.
Signed-off-by: James Chapman <jchapman@katalix.com>

Better to get prototype from system headers

The address was being stored but not used by current code.

In older versions of traffic shaping the Alpha kernel was special
and had higher HZ. This no longer matters, TC is based on high
resoulution timers in kernel.

My previous commit introduced a patch to allow for states with different
ip address families for selector and id. The must have somehow been a
mixup of the patch I tested and the one I send, so the patch sent breaks
the iproute2 build. This patch fixes this. My apologies.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>

Do not enforce the selector of a state to have the same address family
as the id. This makes it possible to configure inter family states.
Signed-off-by: Thomas Egerer <hakke_007@gmx.de>

Split output of 'bridge link' across multiple lines,
only show the flags if -d is set, and add --oneline option
like ip command.

Bridge tool now supports setting and retrieving bridge port specific
link attributes.  Document what attributes are supported and what
they mean.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Output new nested bridge port attributes.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Add netlink support bridge port attributes such as cost, priority, state
and flags.  This also adds support for HW mode such as VEPA or VEB.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Convert leading spaces to tabs, and put alias in one printf

fix warning from parser

Both ip-link and ip-address support the 'up' argument, however this
isn't documented in neither their help outputs or ip-address' manpage.
This patch fixes that.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Reported-by: Jiří Popelka <jpopelka@redhat.com>

On some platforms, shared libraries are not used. The stub code
need some updating to not generate errors.

This patch removes '\n' in -oneline output when alias
present on interface
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

While looking into a sysctl regression in decnet on old kernels I
discovered this omission in the iproute2 documentation.

I can't imagine anyone's muscle memory remembering the longer forms.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

Fdb usage message got too long.

Add the vlan command documentation to bridge man page.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Recent kernel patches added support for VLAN filtering on the bridge.
This functionality allows one to turn a basic bridge into a VLAN bridge,
where VLANs dicatate packet forwarding and header transformation.

To configure the VLANs on the bridge and its ports a new command is
added to the 'bridge' utility.

   # bridge vlan add dev eth0 vid 10 pvid untagged brdev
   # bridge vlan add
   # bridge vlan delete dev eth0 vid 10
   # bridge vlan show

This command supports the following flags:
   master - peform the operation on the software bridge device.  This is
	    the default behavior.
   self  -  perform the operation on the hardware associated with the port.
            This flag is required when the device is the bridge device and
	    the configuration is desired on the bridge device itself (not
	    one of the ports).
   pvid  -  Set the PVID (port vlan id) for a given port.  Any untagged
            frames arriving on the port will be assigned to this vlan.
   untagged - Sets the egress policy of for a given vlan.  Default port
            egress policy is tagged.  Set this flag if you wish traffic
            associated with this VLAN to exit the port untagged.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

Provide the ability to set and show vlans on FDB entries.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>

This reverts commit 90ad5ae7.

This is the iproute2 support allowing an administrator to specify alternate
ports, vnis and outgoing interfaces for VXLAN device forwarding tables.
Signed-Off-By: David L Stevens <dlstevens@us.ibm.com>

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Patrick McHardy <kaber@trash.net>

Reported-by: Andreas Henriksson <andreas@fatal.se>
Signed-off-by: David Ward <david.ward@ll.mit.edu>

Not all arch have sizeof(unsigned long long) == sizeof(__u64)

Some platforms like ppc64 have unsigned long long as 128 bits, and
the printf format string would cause errors. Resolve this by using
unsigned long long where necessary (or unsigned long).