Really by default ss dumps not only TCP sockets but any kind of socket
which is in ESTABLISHED state (TCP/UDP/UNIX).
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Reported-by: Miha Marolt <miham@beyondsemi.com>

Zhang Shengju some places where tabs were not being used.
Go ahead and fix all the trival checkpatch warnings in ip/ip.c
Also fix bridge.c

It really partially reverts:

    ec4d0d8a (ss: Replace unixstat struct by new sockstat struct)

but adds few fields (name & peer_name) from removed unixstat to sockstat struct to easy
return original code.

Fixes: ec4d0d8a (ss: Replace unixstat struct by new sockstat struct)
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Since free(NULL) is a no-op, it is safe to remove unnecesary
if checks.

We forgot to include this patch somehow. So do it now.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com>

After commit 8250bc9f ("ss: Unify inet sockets output") raw sockets
are displayed as udp because dgram_show_line() is used for both and
thus IPPROTO_UDP is used for both so proto_name() returns "udp".
Fix this by checking dg_proto which is set according to the caller of
dgram_show_line().
Reported-by: Miha Marolt <miham@beyondsemi.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

This patch replaces exits with returns in
ip route get command handling. This allows batching
of ip route get commands.

$cat route_get_batch.txt
route get 10.0.14.2
route get 12.0.14.2
route get 10.0.14.4

$ip -batch route_get_batch.txt
local 10.0.14.2 dev lo  src 10.0.14.2
    cache <local>
12.0.14.2 via 192.168.0.2 dev eth0  src 192.168.0.15
    cache
10.0.14.4 dev dummy0  src 10.0.14.2
    cache
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>

The build otherwise fails if libmnl does not directly live in a
standard search path.

Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

if_tun: new ioctl value
libc-compat.h: add definitions for kernel build

Copy of kernel include/uapi/linux/tipc.h is needed to build on systems
with pre-3.16 kernel headers.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>

Add a start of a man-page to the misc section as a reference and
guide on (e)BPF classifier and actions. Given that tc is only tersely
documented, this is provided in the hope that users will have an
easier getting started with tc and (e)BPF. And, that there's now more
incentive for others to also start documenting their classifier and
actions as well. ;)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>

If available and set, print 'v6only:1' for AF_INET6 sockets upon request
of extended information. For IPv6 sockets bound to in6addr_any, this is
the only way to determine if they will also accept IPv4 requests or not.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Andy Gospodaerk <gospo@cumulusnetworks.com>
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Acked-by: Scott Feldman <sfeldma@gmail.com>

Use the IPv4/IPv6/TCP/UDP multicast groups of NETLINK_SOCK_DIAG
to filter and display socket statistics as they are destroyed.

Kernel support patch series: 24029a3603cfa633e8bc2b3fb3e48e76c497831d
Signed-off-by: Craig Gallek <kraig@google.com>

This patch adds support to set bridge stp priority via IFLA_BR_PRIORITY.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to set stp_state via IFLA_BR_STP_STATE.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to set ageing_time via IFLA_BR_AGEING_TIME.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

This patch adds support to retrieve the new bond slave attributes:
IFLA_BOND_SLAVE_AD_ACTOR_OPER_PORT_STATE
IFLA_BOND_SLAVE_AD_PARTNER_OPER_PORT_STATE
which are read-only.

(Removed if_link.h changes already updated in net-next)
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>

Enable reading and displaying SRIOV VFs traffic statistics through
the host PF netdevice using the nested IFLA_VF_STATS attribute.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>

This patch fixes incorrect -EINVAL errors due to invalid
scope and type during mpls route deletes.

$ip -f mpls route add 100 as 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1
RTNETLINK answers: Invalid argument

$ip -f mpls route del 100
RTNETLINK answers: Invalid argument

After patch:

$ip -f mpls route show
100 as to 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route del 100 as 200 via inet 10.1.1.2 dev swp1

$ip -f mpls route show

Always set type to RTN_UNICAST for mpls route add/deletes.
Also to keep things consistent with kernel set scope to
RT_SCOPE_UNIVERSE for both mpls and ipv6 routes. Both mpls and ipv6 route
deletes ignore scope.
Suggested-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>

Two new tcp_info fields: tcpi_segs_in and tcpi_segs_out.
(2efd055c53c06b7e89c167c98069bab9afce7e59)

~: ss -ti src :22
	 cubic wscale:7,6 rto:201 rtt:0.244/0.012 ato:40 mss:1418 cwnd:21 bytes_acked:80605 bytes_received:20491 segs_out:414 segs_in:600 send 976.3Mbps lastsnd:23 lastrcv:23 lastack:22 pacing_rate 1952.7Mbps rcv_rtt:98 rcv_space:28960
Signed-off-by: Craig Gallek <kraig@google.com>
Reviewed-by: Marcelo Ricardo Leitner <mleitner@redhat.com>

This update is to santized kernel headers from net-next.
With one change for fixing the in.h header incompatiablity
(already sent upstream).

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

Allow to retrieve uds path from the environment, facilitates
also dealing with export a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Kernel commit 04fd61ab36ec ("bpf: allow bpf programs to tail-call other
bpf programs") added support for tail calls, this patch here adds tc
front end parts for the object parser to prepopulate a given eBPF prog
array before the root prog is pushed down for classifier creation. The
prepopulation works with any number of prog arrays in any dependencies,
e.g. prog or normal maps could also be used from progs that are
tail-called themself, etc.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Don't echo "-e" when using builtin echo in bash.

s->local.data is a pointer to a field of a non-NULL struct, and hence
cannot be NULL, thus comparing it to 0 is always false, and thus the
return is always false.

Presumably this was meant to be a check whether s->local.data[0] (which
I believe stores af_packet protocol) is 0, ie. ANY.

Change-Id: Ia232f5b06ce081e3b2fb6338f1a709cd94e03ae5
Fixes:
  ss.c:1018:37: error: comparison of array 's->local.data' equal to a null pointer is always false [-Werror,-Wtautological-pointer-compare]
    return s->lport == 0 && s->local.data == 0;
                            ~~~~~~~~~^~~~    ~
  1 error generated.

The initializers are simply not needed.

These if-blocks are outright dead code, because '0 > unsigned' is always
false, so only else clause triggers and regardless of which clause triggers
it only updates 'ind' which is later unconditionally written to before
being used anyway.

Otherwise we get errors from clang:

  m_pedit.c:166:8: error: comparison of 0 > unsigned expression is always false [-Werror,-Wtautological-compare]
    if (0 > tkey->off) {
        ~ ^ ~~~~~~~~~
  m_pedit.c:209:8: error: comparison of 0 > unsigned expression is always false [-Werror,-Wtautological-compare]
    if (0 > tkey->off) {
        ~ ^ ~~~~~~~~~
  2 errors generated.

Change-Id: I3c9e9092915088fc56f992e5df736851541a4458

The command "ip mroute show" is not showing routes when "to" and/or "from"
filter is applied.

root@mazhar:~# ip mroute show
(10.202.30.101, 235.1.2.3)       Iif: eth0       Oifs: eth1

But When I applied filter, it does not show anything.

root@mazhar:~# ip mroute show 235.1.2.3 from 10.202.30.101
root@mazhar:~#
Signed-off-by: Mazhar Rana <ranamazharp@gmail.com>

If a tunnel is created with a local address, you can't change it to any.

 # ip tunnel add tunl1 mode ipip remote 10.16.42.37 local 10.16.42.214 ttl 64
 # ip tunnel show tunl1
 tunl1: ip/ip  remote 10.16.42.37  local 10.16.42.214  ttl 64
 # ip tunnel change tunl1 local any
 # echo $?
 0
 # ip tunnel show tunl1
 tunl1: ip/ip  remote 10.16.42.37  local 10.16.42.214  ttl 64

It happens that parse_args zeroes ip_tunnel_parm, and when creating the
tunnel, it is OK to leave it as is if the address is any. However, when
changing the tunnel, the current parameters will be read from
ip_tunnel_parm, and local and remote address won't be zeroes anymore, so
it needs to be explicitly set to any.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Merge branch 'net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/iproute2 into net-next

Added possibility to check command output by grep from the testing
script.

Now TMP_OUT & TMP_ERR are passed from Makefile and changed to
STD_ERR & STD_OUT.

Also changed some existing tests to make output testing.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>