mroute was using /proc/net/ip_mr_[vif|cache] to display mroute entries. Hence,
only RT_TABLE_DEFAULT was displayed and only IPv4.
With rtnetlink, it is possible to display all tables for IPv4 and IPv6. The output
format is kept. Also, like before the patch, statistics are displayed when user specify
the '-s' argument.

The patch also adds the support of 'ip monitor mroute', which is now possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

INFO_SPEC already uses the term 'OPTIONS' and describe it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Now 'ip link' supports ipip, sit and ip6tnl.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Sync with the current code.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Use tabs instead of space when possible.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Cong Wang <amwang@redhat.com>

This patch implements `bridge monitor mdb`.

Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>

This patch implements:

	bridge mdb { add | del } dev DEV port PORT grp GROUP

Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Cong Wang <amwang@redhat.com>

This patch adds a new flag to iproute2 for vxlan devices to enable
DOVE features. It also adds support for L2 and L3 switch lookup miss
netlink messages to "ip monitor".

Changes since v2: fix merge conflict
Changes since v1:
	- split "dove" flag into separate feature flags:
		- "proxy" for ARP reduction
		- "rsc" for route short circuiting
		- "l2miss" for L2 switch miss notifications
		- "l3miss" for L3 switch miss notifications
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>

This patch allows to manage ip tunnels via the interface ip link.
The syntax for parameters is the same that 'ip tunnel'.

It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

This patch allows to manage ip6 tunnels via the interface ip link.
The syntax for parameters is the same that 'ip -6 tunnel'.

It also allows to display tunnels parameters with 'ip -details link' or
'ip -details monitor link'.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Example of the output:
$ ip monitor netconf&
[1] 24901
$ echo 0 > /proc/sys/net/ipv6/conf/all/forwarding
ipv6 dev lo forwarding off
ipv6 dev eth0 forwarding off
ipv6 all forwarding off
$ echo 1 > /proc/sys/net/ipv4/conf/eth0/forwarding
ipv4 dev eth0 forwarding on

$ ip -6 netconf
ipv6 all forwarding on mc_forwarding 0
$ ip netconf show dev eth0
ipv4 dev eth0 forwarding on rp_filter off mc_forwarding 1
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Minor cleanup of original patch, made sure netconf.h matched
result of santized kernel headers

The debian package checking tool, lintian, spotted that the
tc ematch manpage seems to have an error in the specified section.
Signed-off-by: Andreas Henriksson <andreas@fatal.se>

Sample output:

	# ./bridge/bridge mdb show dev br0
	bridge br0 port eth1 group 224.8.8.9
	bridge br0 port eth0 group 224.8.8.8

	# ./bridge/bridge -d mdb show dev br0
	bridge br0 port eth1 group 224.8.8.9
	bridge br0 port eth0 group 224.8.8.8
	router ports on br0: eth0
Signed-off-by: Cong Wang <amwang@redhat.com>

Since system may not have upto date kernel headers, keep if_bridge.h
in set of exported headers used to build iproute.

Sanitized headers from net-next

Currently the default filter lists TCP sockets only which is
rather confusing especially when the '-a/--all' flag is used.
This patch changes the default to include all sockets, imitating
netstat(8) behavior.
Signed-off-by: Petr Šabata <contyk@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>

The canid ematch has been added in commit:

7b5f30e1 Ematch used to classify CAN frames according to their identifiers

But the corresponding entry in etc/iproute2/ematch_map was lost. This patch
adds the missing entry in ematch_map, otherweise tc would complain:

Error: Unable to find ematch "canid" in /etc/iproute2/ematch_map
Please assign a unique ID to the ematch kind the suggested entry is:
        7       canid
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

When tclass or flowlabel field were updated, we only performed an OR with the
new value. For example, it was not possible to reset tclass:
  ip -6 tunnel change ip6tnl2 tclass 0
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Flag IP6_TNL_F_IGN_ENCAP_LIMIT is set when encaplimit is none, but it was not
removed if encaplimit was set on update (ip tunnel change).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Help is "[tclass TCLASS]", but only TOS was described.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Enables e.g. cross-compiling by setting $CC env var.  This patch
extracted from the Ubuntu package (thanks, Wookey and Colin Watson).

BugLink: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670660
BugLink: https://bugs.launchpad.net/bugs/870197Signed-off-by: Kamal Mostafa <kamal@debian.org>

Hello!

While building the iproute package in Debian I get warnings from
package helpers like this:

dpkg-shlibdeps: warning: package could avoid a useless dependency if debian/iproute/sbin/tc debian/iproute/usr/bin/lnstat debian/iproute/bin/ip debian/iproute/bin/ss debian/iproute/sbin/bridge debian/iproute/sbin/rtmon were not linked against libresolv.so.2 (they use none of the library's symbols)

The -lresolv in ./Makefile seems to come from pre-historic times (before
iproute2 git history, possibly from libc5/pre-glibc days).
I couldn't find out if/why there was any reason for linking to libresolv.
Does anyone know if there are any valid reasons for keeping it still?

If not, I'd be happy to see it go.... while at it I also removed includes
of <resolv.h> which I also couldn't find any reason for, but this is
just an added bonus of the patch (and there are probably more unneeded
includes that could be dropped in the same sources).
Signed-off-by: Andreas Henriksson <andreas@fatal.se>

A couple of places were using "it's" where possive form "its"
should be used instead.

Three manpages in man8 are listed twice in MAN8PAGES (both directly and
in TARGETS) which causes the install command to spit our a couple of
warnings as below and exiting with non-zero exit code....

make[3]: Entering directory `/tmp/buildd/iproute-20121001/man/man8'
install -m 0755 -d /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8
install -m 0644 ip-address.8 ip-link.8 ip-route.8 ip.8 arpd.8 lnstat.8 routel.8 rtacct.8 rtmon.8 ss.8 tc.8 tc-bfifo.8 tc-cbq.8 tc-cbq-details.8 tc-choke.8 tc-codel.8 tc-drr.8 tc-ematch.8 tc-fq_codel.8 tc-hfsc.8 tc-htb.8 tc-netem.8 tc-pfifo.8 tc-pfifo_fast.8 tc-prio.8 tc-red.8 tc-sfb.8 tc-sfq.8 tc-stab.8 tc-tbf.8 bridge.8 rtstat.8 ctstat.8 nstat.8 routef.8 ip-address.8 ip-addrlabel.8 ip-l2tp.8 ip-link.8 ip-maddress.8 ip-monitor.8 ip-mroute.8 ip-neighbour.8 ip-netns.8 ip-ntable.8 ip-route.8 ip-rule.8 ip-tunnel.8 ip-xfrm.8 /tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8
install: will not overwrite just-created `/tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-address.8' with `ip-address.8'
install: will not overwrite just-created `/tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-link.8' with `ip-link.8'
install: will not overwrite just-created `/tmp/buildd/iproute-20121001/debian/tmp/usr/share/man/man8/ip-route.8' with `ip-route.8'
make[3]: *** [install] Error 1
make[3]: Leaving directory `/tmp/buildd/iproute-20121001/man/man8'
make[2]: *** [install] Error 2
make[2]: Leaving directory `/tmp/buildd/iproute-20121001/man'
Signed-off-by: Andreas Henriksson <andreas@fatal.se>

Rather than hard coding `pkg-config`, use ${PKG_CONFIG} so people can
override it to their specific version (like when cross-compiling).

This is the same way the upstream pkg-config code works.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Don't peek at RTA_DATA() directly.

Now everything is prepared for it, so the patch is straightforward.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

That is -- write the code, that sends diag request in new format. It's
mostly copied from tcp-diag code. Plus, sock-diag differentiates sockets
by families, thus we have to send two requests sequentially.

If we fail to submit new sock-diag request, try to fall-back and submit
the legacy tcp-diag one.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The existing function inet_show_netlink sends tcp-diag request and
then receives back the response and prints it on the screen.

The sock-diag and legacy tcp-diag have different request types, but
report sockets in the same format. In order to support both it's
convenient to split the code into sending and receiving parts.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

The sock-diag is capable to diag udp sockets as well. Prepare the
ss code for this by first renaming soon-to-be-generic tcp-s names
into inet-s.
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>

IPv6 multipath routes were not accepted by "ip route" because an IPv4
address was expected for each gateway. Use `get_addr()` instead of
`get_addr32()`.
Signed-off-by: Vincent Bernat <bernat@luffy.cx>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Also sort link types for clarity

Added support to ipoib rtnl ops through which one can create, configure,
query and delete IPoIB devices, for example

 $ ip link add link ib0.8001 name ib0.8001 type ipoib pkey 0x8001
 $ ip link add link ib0.1 name ib0.1 type ipoib mode connected
 $ ip --details link show dev ib0.1

Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>

Get new sanitized headers

Don't send 0 as group address.

ip tcp_metrics/tcpmetrics

	We support get/del for single entry and dump for
show/flush.

v3:
 - fix rtt/rttvar shifts as suggested by Eric Dumazet
 - show rtt/rttvar usecs as suggested by David Laight
Signed-off-by: Julian Anastasov <ja@ssi.bg>