Use current upstream header.

Get rid of self-handling and creating of Netlink socket for show packet
socket stats.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added 'master' option to 'ip link show' command
to filter devices by master dev.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

When output the netlink sockets:

    ss -A netlink state close

the layout is a little broken with a shifted 'Peer Address:Port'
stars and empty new lines. Fixed by making the port field to be
wider for 'Local Address:Port' column.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

I dont see a reason that packet and netlink states will be
printed only if SS_CLOSE state is set in filter, in that case
to print states of netlink or packet sockets it is needed to run:

    ss -A netlink state close

instead of:

    ss -A netlink
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

As 'ip' util will share the same netns from the caller
process then we can just look at /proc/self/.. to show
the netns of the current process by:

    ip netns id
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

With this change the results of tc tests will be recorded under:

    testsuite/results/tc/

The ip related tests can be added under:

    testsuite/tests/ip
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added 'dev' option to allow filtering events by device.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

There were only few Netlink protocol names
which were printed on the screen:

    rtnl, fw, tcpdiag

So added the ability to identify Netlink proto name
from /etc/iproute/nl_protos or from static table.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Add udpcsum option to enable transmitting UDP checksums when doing
VXLAN/IPv4. Add udp6zerocsumtx, and udp6zerocsumrx options to enable
sending zero checksums and receiving zero checksums in VXLAN/IPv6.
Signed-off-by: Tom Herbert <therbert@google.com>

Add documentation on how to create devices of type IP-over-Infiniband
in the man page.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>

ip route change dev tap0 192.168.7.0/24 rto_min 1ms
Error: argument "1ms" is wrong: "rto_min" value is invalid

get_time_rtt() checks for 's' or 'msec' and converts to milliseconds
if needed.

Fixes: 697ac639 (utils: fix range checking for get_u32/get_u64 et all)
Signed-off-by: Florian Westphal <fw@strlen.de>

Man pages for Foo-over-UDP and Generic UDP Encapsulation receive
port configuration. gue man page links to fou one.
Signed-off-by: Tom Herbert <therbert@google.com>

This patch adds support to configure foo-over-udp (FOU) and Generic
UDP Encapsulation for GRE tunnels. This configuration allows selection
of FOU or GUE for the tunnel, specification of the source and
destination ports for UDP tunnel, and enabling TX checksum. This
configuration only affects the transmit side of a tunnel.

Example:

ip link add name tun1 type gre remote 192.168.1.1 local 192.168.1.2 \
   ttl 225 encap fou encap-sport auto encap-dport 7777 encap-csum

This would create an GRE tunnel in GUE encapsulation where the source
port is automatically selected (based on hash of inner packet) and
checksums in the encapsulating UDP header are enabled.
Signed-off-by: Tom Herbert <therbert@google.com>

This patch adds support to configure foo-over-udp (FOU) and Generic
UDP Encapsulation for IPIP and sit tunnels. This configuration allows
selection of FOU or GUE for the tunnel, specification of the source and
destination ports for UDP tunnel, and enabling TX checksum. This
configuration only affects the transmit side of a tunnel.

Example:

ip link add name tun1 type ipip remote 192.168.1.1 local 192.168.1.2 \
   ttl 225 encap gue encap-sport auto encap-dport 9999 encap-csum

This would create an IPIP tunnel in GUE encapsulation where the source
port is automatically selected (based on hash of inner packet) and
checksums in the encapsulating UDP header are enabled.
Signed-off-by: Tom Herbert <therbert@google.com>

Added 'ip fou...' commands to enable/disable UDP ports for doing
foo-over-udp and Generic UDP Encapsulation variant. Arguments are port
number to bind to and IP protocol to map to port (for direct FOU).

Examples:

ip fou add port 7777 gue
ip fou add port 8888 ipproto 4

The first command creates a GUE port, the second creates a direct FOU
port for IPIP (receive payload is a assumed to be an IPv4 packet).
Signed-off-by: Tom Herbert <therbert@google.com>

Signed-off-by: Masatake YAMATO <yamato@redhat.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Width is the maximum number of characters used for the value, excluding a
field separator. So append a single whitespace.

Add a new -iec option in addition to -human.
Cleanup code so the formatting of numbers is done in one function,
not 2 ways and 2 sizes.

Byte and packet count can increase to really big numbers. This adds a
switch to show human readable output.

4: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether 00:de:ad:be:ee:ef brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1523846973 3969051  0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    8710088361 6077735  0       0       0       0
4: wl: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether 00:de:ad:be:ee:ef brd ff:ff:ff:ff:ff:ff
    RX: bytes  packets  errors  dropped overrun mcast
    1.5G       3.9M     0       0       0       0
    TX: bytes  packets  errors  dropped carrier collsns
    8.7G       6.0M     0       0       0       0

- any ipv6 tunnel mode (proto == 0) could not be set
due to incomplete set of cases in do_add, do_del.
- vti6 logic was inverted: it was using "ip6_vti0" basedev
UNLESS mode is set to vti6.

We don't need a switch by p.proto in do_add()/do_del(): it
already exists in parse_args(). So if parse_args() call
was successful, no need to check tunnel mode again.
Signed-off-by: Alexey Andriyanov <alan@al-an.info>

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Conflicts:
	include/linux/if_tunnel.h

This patch allows to configure ESN and anti-replay window.
Signed-off-by: dingzhi <zhi.ding@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Starting from linux-3.15 (commit 9063e21fb026, "netlink: autosize skb
lengths"), kernel is able to send up to 16K in netlink replies.

This change enables iproute2 commands to get bigger chunks,
without breaking compatibility with old kernels.
Signed-off-by: Eric Dumazet <edumazet@google.com>

Dump useful DCTCP state/debug information gathered from diag.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>

Such approach allows to run *.t scripts from any
tests/ subdirectories.

One point is that tests from tests/cls/*.t (which are needed
by tests/cls-testbed.t but does not exist yet) will also
be ran aside with tests/cls-testbed.t which is not good
because in such case they will be ran twice, so renamed these
tests path to tests/cls/*.c in tests/cls-testbed.t
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Curently tests/cls-testbed.t tries to run any *.t in
tests/cls/ folder but such folder does not exist.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

The list is based on doc/Makefile 'clean' target
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

emp_ematch.y:12.1-13: warning: deprecated directive, use ‘%name-prefix’ [-Wdeprecated]
 %name-prefix="ematch_"
 ^^^^^^^^^^^^^