Signed-off-by: Jiri Pirko <jiri@mellanox.com>

Signed-off-by: Jiri Pirko <jiri@mellanox.com>

"dl" -> "devlink"
Signed-off-by: Jiri Pirko <jiri@mellanox.com>

Kernel sets info->tcpi_min_rtt to ~0U when no RTT sample was ever
taken for the session, thus min_rtt is unknown.
Signed-off-by: Eric Dumazet <edumazet@google.com>

Passing a filter expression and selecting an address family using the
'-f' flag would overwrite the state filter by accident. Therefore
calling e.g. 'ss -nl -f inet '(sport = :22)' would not only print
listening sockets (as requested by '-l' flag) but connected ones, as
well.

Fix this by reusing the formerly ineffective call to filter_states_set()
to restore the state filter as it was before the call to
filter_af_set().
Signed-off-by: Phil Sutter <phil@nwl.cc>

An expression of the form '(a | b) & b' will evaluate to the value of b
for any value of a or b.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Use the same rtnl_dump_request_n call as the show.  The rtnl_wilddump_request
assumes the type uses an ifinfomsg which is not the case for the neighbor
table.
Signed-off-by: Jeff Harris <jefftharris@gmail.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>

Fix whitespace

This adds a new item to VF lines of a PF, stating whether the VF is
trusted or not.
Signed-off-by: Phil Sutter <phil@nwl.cc>

We need limits.h for PATH_MAX, fixes:

tc_bpf.c: In function ‘bpf_map_selfcheck_pinned’:
tc_bpf.c:222:12: error: ‘PATH_MAX’ undeclared (first use in this
function)
  char file[PATH_MAX], buff[4096];
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>

Since output of ip commands are already cluttered, move the physical port details
under a show_details option.

Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>

Follow-up to kernel commit 6c9059817432 ("bpf: pre-allocate hash map
elements"). Add flags support, so that we can pass in BPF_F_NO_PREALLOC
flag for disallowing preallocation. Update examples accordingly and also
remove the BPF_* map helper macros from them as they were not very useful.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Make it easier to spot issues when loading the object file fails. This
includes reporting in what pinned object specs differ, better indication
when we've reached instruction limits. Don't retry to load a non relo
program once we failed with bpf(2), and report out of bounds tail call key.

Also, add truncation of huge log outputs by default. Sometimes errors are
quite easy to spot by only looking at the tail of the verifier log, but
logs can get huge in size e.g. up to few MB (due to verifier checking all
possible program paths). Thus, by default limit output to the last 4096
bytes and indicate that it's truncated. For the full log, the verbose option
can be used.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add new signatures for BPF_FUNC_csum_diff, BPF_FUNC_skb_get_tunnel_opt
and BPF_FUNC_skb_set_tunnel_opt.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add the optional keyword "vid" to bridge vlan show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to
match the add/del one - "vid". This filtering can be used also with the
"-compressvlans" option to see in which range is a vlan (if in any).
Also this will be used to show only specific per-vlan statistics later
when support is added to the kernel for it.

Examples:
$ bridge vlan show vid 450
port	vlan ids
eth2	 450

$ bridge -c vlan show vid 450
port	vlan ids
eth2	 400-500

$ bridge vlan show vid 1
port	vlan ids
eth1	 1 PVID Egress Untagged
eth2	 1 PVID
br0	 1 PVID Egress Untagged
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add the optional keyword "vid" to bridge mdb show so the user can
request filtering by a specific vlan id. Currently the filtering is
implemented only in user-space. The argument name has been chosen to match
the add/del one - "vid".

Example:
$ bridge mdb show vid 200
dev br0 port eth2 grp 239.0.0.1 permanent vid 200
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

Add the optional keyword "vlan" to bridge fdb show so the user can request
filtering by a specific vlan id. Currently the filtering is implemented
only in user-space. The argument name has been chosen to match the
add/del one - "vlan".

Example:
$ bridge fdb show vlan 400
52:54:00:bf:57:16 dev eth2 vlan 400 master br0 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>

We can set the attributes, so would be nice to display them when
provided by the kernel.
Signed-off-by: Eric Dumazet <edumazet@google.com>

Update from 4.6-rc3

devlink binary is built

Follow-up for kernel commit 8eb3b99554b8 ("geneve: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Follow-up for kernel commit e7f70af111f0 ("vxlan: support setting
IPv6 flow label") to allow setting the label for the device config.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add new tool called devlink which is userspace counterpart of devlink
Netlink socket.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>

Rename hlist.h to list.h while adding it to be aligned with kernel
Signed-off-by: Jiri Pirko <jiri@mellanox.com>

Enable support for configuring outer UDP checksums on Geneve tunnels:

ip link add type geneve id 10 remote 10.0.0.2 udpcsum
Signed-off-by: Jesse Gross <jesse@kernel.org>

On recent kernels, UDP checksum computation has become more efficient and
the default behavior was changed, however, the ip command overrides this
by always specifying a particular behavior.

If the user does not specify that UDP checksums should either be computed
or not then we don't need to send an explicit netlink message - the kernel
can just use its default behavior.
Signed-off-by: Jesse Gross <jesse@kernel.org>

Run script that removes trailing whitespace everywhere.

An attempt to add invalid address to interface would print "???" string
instead of the address family name.

For example:
$ ip address add 256.10.166.1/24 dev ens8
Error: ??? prefix is expected rather than "256.10.166.1/24".

$ ip neighbor add proxy 2001:db8::g dev ens8
Error: ??? address is expected rather than "2001:db8::g".

With this patch the output will look like:
$ ip address add 256.10.166.1/24 dev ens8
Error: inet prefix is expected rather than "256.10.166.1/24".

$ ip neighbor add proxy 2001:db8::g dev ens8
Error: inet6 address is expected rather than "2001:db8::g".
Signed-off-by: Przemyslaw Szczerbik <przemyslawx.szczerbik@intel.com>
Signed-off-by: Marco Varlese <marco.varlese@intel.com>

Apart from making the code a bit more compact and efficient, this also
prevents a potential buffer overflow if the passed buffer is really too
small: Although correctly decrementing the size parameter passed to
snprintf, it could become negative which would then wrap since snprintf
uses (unsigned) size_t for the parameter.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This simple macro eases calling rt_addr_n2a() with data from an rt_attr
pointer.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This simple macro eases calling format_host() with data from an rt_attr
pointer.
Signed-off-by: Phil Sutter <phil@nwl.cc>

There is only a single user who needs it to be reentrant (not really,
but it's safer like this), add rt_addr_n2a_r() for it to use.
Signed-off-by: Phil Sutter <phil@nwl.cc>

There are only three users which require it to be reentrant, the rest is
fine without. Instead, provide a reentrant format_host_r() for users
which need it.
Signed-off-by: Phil Sutter <phil@nwl.cc>

Signed-off-by: Phil Sutter <phil@nwl.cc>

This adds two helper functions which map a given data field to a color,
so color_fprintf() statements don't have to be duplicated with only a
different color value depending on that data field's value. In order for
this to work in a generic way, COLOR_CLEAR has been added to serve as a
fallback default of uncolored output.
Signed-off-by: Phil Sutter <phil@nwl.cc>

This should be made generic and part of a common tc-actions man page.
Though leave it here for now to not confuse readers of the example which
uses it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

As Jamal pointed out, there are two different approaches to bandwidth
measurement. Try to make this clear by separating them in synopsis and
also documenting the way to fine-tune avrate.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>