addrgenmode is currently write only by ip. So display this information
if provided by kernel as well.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

This patch fixes some filtering combinations issues which does not
work on the 'master' version:

    $ ss -4
    shows inet & unix sockets, instead of only inet sockets

    $ ss -u
    needs to specify 'state closed'

    $ ss src unix:*X11*
    needs to specify '-x' shortcut for UNIX family

    $ ss -A all
    shows only sockets with established states

There might some other issues which was not observed.

Also changed logic for calculating families, socket types and
states filtering. I think that this version is a little simpler
one. Now there are 2 predefined default tables which describes
the following maping:

    family  -> (states, dbs)
    db      -> (states, families)
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Refactored to use one func for output packet stats info
from both /proc and netlink.

Added possibility to get packet stats info from /proc
by setting environment variable PROC_ROOT or PROC_NET_PACKET.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Refactored to use one func for output unix stats info
from both /proc and netlink.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Sometimes, it is more convenient to get only one specific nested attribute by
type. For example for IFLA_AF_SPEC where type is address family (AF_INET6).
So add this helper for this purpose.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Suggested by Vadim Kochan

v2:

Resending now that the dust has cleared in 3.18 on "self" vs. hwmode debate for
brport settings.  learning_sync is now set/cleared using "self" qualifier on
brport.

v1:

Add 'learned_sync' flag to turn on/off syncing of learned MAC addresses from
offload device to bridge's FDB.   Flag is be set/cleared on offload device port
using "self" qualifier:

  $ sudo bridge link set dev swp1 learning_sync on self

  $ bridge -d link show dev swp1
  2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding priority 32 cost 2
      hairpin off guard off root_block off fastleave off learning off flood off
  2: swp1 state UNKNOWN : <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0
      learning on learning_sync on

Adds new IFLA_BRPORT_LEARNED_SYNCED attribute for IFLA_PROTINFO on the SELF
brport.
Signed-off-by: Scott Feldman <sfeldma@gmail.com>

Stolen from generated doc/ss.html
Also added reference to RFC 793 for TCP states.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Fixed -t[short] to -ts[hort] as '-t' is related to
-timestamp option.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added new '-netns' option to simplify executing following cmd:

    ip netns exec NETNS tc OPTIONS COMMAND OBJECT

    to

    tc -n[etns] NETNS OPTIONS COMMAND OBJECT

e.g.:

    tc -net vnet0 qdisc
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Added new '-netns' option to simplify executing following cmd:

    ip netns exec NETNS bridge OPTIONS COMMAND OBJECT

    to

    bridge -n[etns] NETNS OPTIONS COMMAND OBJECT

e.g.:

    bridge -net vnet0 fdb
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Added new '-netns' option to simplify executing following cmd:

    ip netns exec NETNS ip OPTIONS COMMAND OBJECT

    to

    ip -n[etns] NETNS OPTIONS COMMAND OBJECT

e.g.:

    ip -net vnet0 link add br0 type bridge
    ip -n vnet0 link
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

New netns_switch func moved to the lib/namespace.c from ip/ipnetns.c
so it can be used from the other tools for fast switching
network namespace.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>

Just another refactoring for ss to use rtnl API from lib
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Added new '-g[raph]' option which shows classes in the graph view.

Meanwhile only generic stats info output is supported.

e.g.:

$ tc/tc -g class show dev tap0
+---(1:2) htb rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
|    +---(1:40) htb prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
|    +---(1:50) htb rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
|    |    +---(1:51) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
|    |
|    +---(1:60) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
|
+---(1:1) htb rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
     +---(1:10) htb prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
     +---(1:20) htb prio 0 rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
     +---(1:30) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b

$ tc/tc -g -s class show dev tap0
+---(1:2) htb rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
|    |    Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
|    |    rate 0bit 0pps backlog 0b 0p requeues 0
|    |
|    +---(1:40) htb prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
|    |          Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
|    |          rate 0bit 0pps backlog 0b 0p requeues 0
|    |
|    +---(1:50) htb rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
|    |    |     Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
|    |    |     rate 0bit 0pps backlog 0b 0p requeues 0
|    |    |
|    |    +---(1:51) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
|    |               Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
|    |               rate 0bit 0pps backlog 0b 0p requeues 0
|    |
|    +---(1:60) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
|               Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
|               rate 0bit 0pps backlog 0b 0p requeues 0
|
+---(1:1) htb rate 6Mbit ceil 6Mbit burst 15Kb cburst 1599b
     |    Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
     |    rate 0bit 0pps backlog 0b 0p requeues 0
     |
     +---(1:10) htb prio 0 rate 5Mbit ceil 5Mbit burst 15Kb cburst 1600b
     |          Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
     |          rate 0bit 0pps backlog 0b 0p requeues 0
     |
     +---(1:20) htb prio 0 rate 3Mbit ceil 6Mbit burst 15Kb cburst 1599b
     |          Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
     |          rate 0bit 0pps backlog 0b 0p requeues 0
     |
     +---(1:30) htb prio 0 rate 1Kbit ceil 6Mbit burst 15Kb cburst 1599b
                Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
                rate 0bit 0pps backlog 0b 0p requeues 0
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Extend "ip-address" man page to reflect the recent extension of
allowing to list addresses with flags tentative, deprecated, dadfailed
not being set.
Signed-off-by: Heiner Kallweit <heiner.kallweit@web.de>

Currently self is set internally only if hwmode is set.
This makes it necessary for the hw to have a mode.
There is no hwmode really required to go to hardware. So, introduce
self for anybody who wants to target hardware.

v1 -> v2
    - fix a few bugs. Initialize flags to zero: this was required to
    keep the current behaviour unchanged.

v2 -> v3
    - fix comment
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>

Use addattr_nest() and addattr_nest_end() to simplify the code.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>

Added new option 'type' to 'ip link show'
command which allows to filter devices by type:

    ip link show type bridge
    ip link show type vlan
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Sometimes it's needed to have "ip address show" list only addresses
with certain flags not being set, e.g. in network scripts.
As an example one might want to exclude addresses in "tentative"
or "deprecated" state.

Support listing addresses with flags tentative, deprecated, dadfailed
not being set by prefixing the respective flag with a minus.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

Added another timestamp format to look like more logging info:

[2014-12-22T22:36:50.489 ] 2: enp0s25: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default
    link/ether 3c:97:0e:a3:86:2e brd ff:ff:ff:ff:ff:ff
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Remove all trailing whitespace and space before tabs.

Checking by SS_CLOSE state was remowed in:

    (45a4770b) ss: Remove checking SS_CLOSE state for packet and netlink

which is not really correct because now by default all sockets are seen
when do 'ss'.

Here is most correct fix which considers specified family.

To see netlink sockets:
    ss -A netlink

To see packet sockets:
    ss -A packet

And ss by default will show only connected/established sockets as it
was before all the time.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Replaced handling netlink messages by rtnl_dump_filter
from lib/libnetlink.c, also:

    - removed unused dump_fp arg;
    - added MAGIC_SEQ #define for 123456 seq id;
    - silently exit if ENOENT errno is caused for NETLINK_SOCK_DIAG proto
        in lib/libnetlink.c: rtnl_duml_filter_l(...) function. This fix
        was added in a3fd8e58 by Eric
        for misc/ss.c
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Go back to kernel version of if_bridge.h and use patched
version of linux/in6.h and libc-compat.h

Needs to be built at runtime.

Now it is posible to filter by existing Netlink protos:

    ss -A netlink src uevent
    ss -A netlink src nft
    ss -A netlink src genl
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

This patch makes CAN_CTRLMODE_PRESUME_ACK netlink feature configurable.
When enabled, the feature sets CAN controller in mode in which
acknowledgement absence is ignored.
Signed-off-by: Nikita Edward Baruzdin <nebaruzdin@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>

On Fri, 2014-12-05 at 17:13 -0800, Eric Dumazet wrote:

> I guess we could count number of spaces/fields in both lines,
> and disable the iproute2 trick if counts match.

Something like that maybe ?

 misc/nstat.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
Tested-by: Vijay Subramanian <subramanian.vijay@gmail.com>

This patch fixes the following issues which was introduced by me in commits:

    #1 (2dc85485) ss: Fixed broken output for Netlink 'Peer Address:Port' column
    ISSUE: Broken layout when all sockets are printed out

    #2 (eef43b50) ss: Identify more netlink protocol names
    ISSUE: Protocol id is not printed if 'numbers only' output was specified (-n)

Also aligned the width of the local/peer ports to be more wider.

I tested with a lot of option combinations (I may miss some test cases),
but layout seems to me better than the previous released version of iproute2/ss.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>

Adding in6.h breaks build with redefined values.

The issue was observed when IPv6 router broadcasted NDUSEROPT
messages which are not handled by monitor and caused printing
'Timestamps' w/o message because such kind of rtnl messages is not
handled by monitor.

As 'ip monitor' by default subscribes to the all mcast rtnl groups except
RTGRP_TC then all messages of these rtnl groups which are not handled by
monitor may cause such issues.

Fixed by subscribing by default to rtnl mcast groups which are
supported by 'ip monitor'.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>