boardergo.c 15.5 KB
Newer Older
Linus Torvalds's avatar
Linus Torvalds committed
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
/* $Id: boardergo.c,v 1.5.6.7 2001/11/06 21:58:19 kai Exp $
 *
 * Linux driver for HYSDN cards, specific routines for ergo type boards.
 *
 * Author    Werner Cornelius (werner@titro.de) for Hypercope GmbH
 * Copyright 1999 by Werner Cornelius (werner@titro.de)
 *
 * This software may be used and distributed according to the terms
 * of the GNU General Public License, incorporated herein by reference.
 *
 * As all Linux supported cards Champ2, Ergo and Metro2/4 use the same
 * DPRAM interface and layout with only minor differences all related
 * stuff is done here, not in separate modules.
 *
 */

#include <linux/config.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <asm/io.h>

#include "hysdn_defs.h"
#include "boardergo.h"

#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)

/***************************************************/
/* The cards interrupt handler. Called from system */
/***************************************************/
static irqreturn_t
ergo_interrupt(int intno, void *dev_id, struct pt_regs *regs)
{
	hysdn_card *card = dev_id;	/* parameter from irq */
	tErgDpram *dpr;
41 42
	unsigned long flags;
	unsigned char volatile b;
Linus Torvalds's avatar
Linus Torvalds committed
43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

	if (!card)
		return IRQ_NONE;		/* error -> spurious interrupt */
	if (!card->irq_enabled)
		return IRQ_NONE;		/* other device interrupting or irq switched off */

	save_flags(flags);
	cli();			/* no further irqs allowed */

	if (!(bytein(card->iobase + PCI9050_INTR_REG) & PCI9050_INTR_REG_STAT1)) {
		restore_flags(flags);	/* restore old state */
		return IRQ_NONE;		/* no interrupt requested by E1 */
	}
	/* clear any pending ints on the board */
	dpr = card->dpram;
	b = dpr->ToPcInt;	/* clear for ergo */
	b |= dpr->ToPcIntMetro;	/* same for metro */
	b |= dpr->ToHyInt;	/* and for champ */

	/* start kernel task immediately after leaving all interrupts */
	if (!card->hw_lock)
		schedule_work(&card->irq_queue);
	restore_flags(flags);
	return IRQ_HANDLED;
}				/* ergo_interrupt */

/******************************************************************************/
/* ergo_irq_bh is the function called by the immediate kernel task list after */
/* being activated with queue_task and no interrupts active. This task is the */
/* only one handling data transfer from or to the card after booting. The task */
/* may be queued from everywhere (interrupts included).                       */
/******************************************************************************/
static void
ergo_irq_bh(hysdn_card * card)
{
	tErgDpram *dpr;
	int again;
80
	unsigned long flags;
Linus Torvalds's avatar
Linus Torvalds committed
81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133

	if (card->state != CARD_STATE_RUN)
		return;		/* invalid call */

	dpr = card->dpram;	/* point to DPRAM */

	save_flags(flags);
	cli();
	if (card->hw_lock) {
		restore_flags(flags);	/* hardware currently unavailable */
		return;
	}
	card->hw_lock = 1;	/* we now lock the hardware */

	do {
		sti();		/* reenable other ints */
		again = 0;	/* assume loop not to be repeated */

		if (!dpr->ToHyFlag) {
			/* we are able to send a buffer */

			if (hysdn_sched_tx(card, dpr->ToHyBuf, &dpr->ToHySize, &dpr->ToHyChannel,
					   ERG_TO_HY_BUF_SIZE)) {
				dpr->ToHyFlag = 1;	/* enable tx */
				again = 1;	/* restart loop */
			}
		}		/* we are able to send a buffer */
		if (dpr->ToPcFlag) {
			/* a message has arrived for us, handle it */

			if (hysdn_sched_rx(card, dpr->ToPcBuf, dpr->ToPcSize, dpr->ToPcChannel)) {
				dpr->ToPcFlag = 0;	/* we worked the data */
				again = 1;	/* restart loop */
			}
		}		/* a message has arrived for us */
		cli();		/* no further ints */
		if (again) {
			dpr->ToHyInt = 1;
			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */
		} else
			card->hw_lock = 0;	/* free hardware again */
	} while (again);	/* until nothing more to do */

	restore_flags(flags);
}				/* ergo_irq_bh */


/*********************************************************/
/* stop the card (hardware reset) and disable interrupts */
/*********************************************************/
static void
ergo_stopcard(hysdn_card * card)
{
134 135
	unsigned long flags;
	unsigned char val;
Linus Torvalds's avatar
Linus Torvalds committed
136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159

	hysdn_net_release(card);	/* first release the net device if existing */
#ifdef CONFIG_HYSDN_CAPI
	hycapi_capi_stop(card);
#endif /* CONFIG_HYSDN_CAPI */
	save_flags(flags);
	cli();
	val = bytein(card->iobase + PCI9050_INTR_REG);	/* get actual value */
	val &= ~(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1);	/* mask irq */
	byteout(card->iobase + PCI9050_INTR_REG, val);
	card->irq_enabled = 0;
	byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RESET);	/* reset E1 processor */
	card->state = CARD_STATE_UNUSED;
	card->err_log_state = ERRLOG_STATE_OFF;		/* currently no log active */

	restore_flags(flags);
}				/* ergo_stopcard */

/**************************************************************************/
/* enable or disable the cards error log. The event is queued if possible */
/**************************************************************************/
static void
ergo_set_errlog_state(hysdn_card * card, int on)
{
160
	unsigned long flags;
Linus Torvalds's avatar
Linus Torvalds committed
161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219

	if (card->state != CARD_STATE_RUN) {
		card->err_log_state = ERRLOG_STATE_OFF;		/* must be off */
		return;
	}
	save_flags(flags);
	cli();

	if (((card->err_log_state == ERRLOG_STATE_OFF) && !on) ||
	    ((card->err_log_state == ERRLOG_STATE_ON) && on)) {
		restore_flags(flags);
		return;		/* nothing to do */
	}
	if (on)
		card->err_log_state = ERRLOG_STATE_START;	/* request start */
	else
		card->err_log_state = ERRLOG_STATE_STOP;	/* request stop */

	restore_flags(flags);
	schedule_work(&card->irq_queue);
}				/* ergo_set_errlog_state */

/******************************************/
/* test the cards RAM and return 0 if ok. */
/******************************************/
static const char TestText[36] = "This Message is filler, why read it";

static int
ergo_testram(hysdn_card * card)
{
	tErgDpram *dpr = card->dpram;

	memset(dpr->TrapTable, 0, sizeof(dpr->TrapTable));	/* clear all Traps */
	dpr->ToHyInt = 1;	/* E1 INTR state forced */

	memcpy(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
	       sizeof(TestText));
	if (memcmp(&dpr->ToHyBuf[ERG_TO_HY_BUF_SIZE - sizeof(TestText)], TestText,
		   sizeof(TestText)))
		return (-1);

	memcpy(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
	       sizeof(TestText));
	if (memcmp(&dpr->ToPcBuf[ERG_TO_PC_BUF_SIZE - sizeof(TestText)], TestText,
		   sizeof(TestText)))
		return (-1);

	return (0);
}				/* ergo_testram */

/*****************************************************************************/
/* this function is intended to write stage 1 boot image to the cards buffer */
/* this is done in two steps. First the 1024 hi-words are written (offs=0),  */
/* then the 1024 lo-bytes are written. The remaining DPRAM is cleared, the   */
/* PCI-write-buffers flushed and the card is taken out of reset.             */
/* The function then waits for a reaction of the E1 processor or a timeout.  */
/* Negative return values are interpreted as errors.                         */
/*****************************************************************************/
static int
220 221
ergo_writebootimg(struct HYSDN_CARD *card, unsigned char *buf,
			unsigned long offs)
Linus Torvalds's avatar
Linus Torvalds committed
222
{
223
	unsigned char *dst;
Linus Torvalds's avatar
Linus Torvalds committed
224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267
	tErgDpram *dpram;
	int cnt = (BOOT_IMG_SIZE >> 2);		/* number of words to move and swap (byte order!) */
	
	if (card->debug_flags & LOG_POF_CARD)
		hysdn_addlog(card, "ERGO: write bootldr offs=0x%lx ", offs);

	dst = card->dpram;	/* pointer to start of DPRAM */
	dst += (offs + ERG_DPRAM_FILL_SIZE);	/* offset in the DPRAM */
	while (cnt--) {
		*dst++ = *(buf + 1);	/* high byte */
		*dst++ = *buf;	/* low byte */
		dst += 2;	/* point to next longword */
		buf += 2;	/* buffer only filled with words */
	}

	/* if low words (offs = 2) have been written, clear the rest of the DPRAM, */
	/* flush the PCI-write-buffer and take the E1 out of reset */
	if (offs) {
		memset(card->dpram, 0, ERG_DPRAM_FILL_SIZE);	/* fill the DPRAM still not cleared */
		dpram = card->dpram;	/* get pointer to dpram structure */
		dpram->ToHyNoDpramErrLog = 0xFF;	/* write a dpram register */
		while (!dpram->ToHyNoDpramErrLog);	/* reread volatile register to flush PCI */

		byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN);	/* start E1 processor */
		/* the interrupts are still masked */

		sti();
		msleep_interruptible(20);		/* Timeout 20ms */

		if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
			if (card->debug_flags & LOG_POF_CARD)
				hysdn_addlog(card, "ERGO: write bootldr no answer");
			return (-ERR_BOOTIMG_FAIL);
		}
	}			/* start_boot_img */
	return (0);		/* successful */
}				/* ergo_writebootimg */

/********************************************************************************/
/* ergo_writebootseq writes the buffer containing len bytes to the E1 processor */
/* using the boot spool mechanism. If everything works fine 0 is returned. In   */
/* case of errors a negative error value is returned.                           */
/********************************************************************************/
static int
268
ergo_writebootseq(struct HYSDN_CARD *card, unsigned char *buf, int len)
Linus Torvalds's avatar
Linus Torvalds committed
269 270
{
	tDpramBootSpooler *sp = (tDpramBootSpooler *) card->dpram;
271 272
	unsigned char *dst;
	unsigned char buflen;
Linus Torvalds's avatar
Linus Torvalds committed
273
	int nr_write;
274 275
	unsigned char tmp_rdptr;
	unsigned char wr_mirror;
Linus Torvalds's avatar
Linus Torvalds committed
276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333
	int i;

	if (card->debug_flags & LOG_POF_CARD)
		hysdn_addlog(card, "ERGO: write boot seq len=%d ", len);

	dst = sp->Data;		/* point to data in spool structure */
	buflen = sp->Len;	/* maximum len of spooled data */
	wr_mirror = sp->WrPtr;	/* only once read */
	sti();

	/* try until all bytes written or error */
	i = 0x1000;		/* timeout value */
	while (len) {

		/* first determine the number of bytes that may be buffered */
		do {
			tmp_rdptr = sp->RdPtr;	/* first read the pointer */
			i--;	/* decrement timeout */
		} while (i && (tmp_rdptr != sp->RdPtr));	/* wait for stable pointer */

		if (!i) {
			if (card->debug_flags & LOG_POF_CARD)
				hysdn_addlog(card, "ERGO: write boot seq timeout");
			return (-ERR_BOOTSEQ_FAIL);	/* value not stable -> timeout */
		}
		if ((nr_write = tmp_rdptr - wr_mirror - 1) < 0)
			nr_write += buflen;	/* now we got number of free bytes - 1 in buffer */

		if (!nr_write)
			continue;	/* no free bytes in buffer */

		if (nr_write > len)
			nr_write = len;		/* limit if last few bytes */
		i = 0x1000;	/* reset timeout value */

		/* now we know how much bytes we may put in the puffer */
		len -= nr_write;	/* we savely could adjust len before output */
		while (nr_write--) {
			*(dst + wr_mirror) = *buf++;	/* output one byte */
			if (++wr_mirror >= buflen)
				wr_mirror = 0;
			sp->WrPtr = wr_mirror;	/* announce the next byte to E1 */
		}		/* while (nr_write) */

	}			/* while (len) */
	return (0);
}				/* ergo_writebootseq */

/***********************************************************************************/
/* ergo_waitpofready waits for a maximum of 10 seconds for the completition of the */
/* boot process. If the process has been successful 0 is returned otherwise a     */
/* negative error code is returned.                                                */
/***********************************************************************************/
static int
ergo_waitpofready(struct HYSDN_CARD *card)
{
	tErgDpram *dpr = card->dpram;	/* pointer to DPRAM structure */
	int timecnt = 10000 / 50;	/* timeout is 10 secs max. */
334
	unsigned long flags;
Linus Torvalds's avatar
Linus Torvalds committed
335 336 337 338 339 340 341 342 343 344 345 346 347 348
	int msg_size;
	int i;

	if (card->debug_flags & LOG_POF_CARD)
		hysdn_addlog(card, "ERGO: waiting for pof ready");
	while (timecnt--) {
		/* wait until timeout  */

		if (dpr->ToPcFlag) {
			/* data has arrived */

			if ((dpr->ToPcChannel != CHAN_SYSTEM) ||
			    (dpr->ToPcSize < MIN_RDY_MSG_SIZE) ||
			    (dpr->ToPcSize > MAX_RDY_MSG_SIZE) ||
349
			    ((*(unsigned long *) dpr->ToPcBuf) != RDY_MAGIC))
Linus Torvalds's avatar
Linus Torvalds committed
350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454
				break;	/* an error occurred */

			/* Check for additional data delivered during SysReady */
			msg_size = dpr->ToPcSize - RDY_MAGIC_SIZE;
			if (msg_size > 0)
				if (EvalSysrTokData(card, dpr->ToPcBuf + RDY_MAGIC_SIZE, msg_size))
					break;

			if (card->debug_flags & LOG_POF_RECORD)
				hysdn_addlog(card, "ERGO: pof boot success");
			save_flags(flags);
			cli();

			card->state = CARD_STATE_RUN;	/* now card is running */
			/* enable the cards interrupt */
			byteout(card->iobase + PCI9050_INTR_REG,
				bytein(card->iobase + PCI9050_INTR_REG) |
			(PCI9050_INTR_REG_ENPCI | PCI9050_INTR_REG_EN1));
			card->irq_enabled = 1;	/* we are ready to receive interrupts */

			dpr->ToPcFlag = 0;	/* reset data indicator */
			dpr->ToHyInt = 1;
			dpr->ToPcInt = 1;	/* interrupt to E1 for all cards */

			restore_flags(flags);
			if ((hynet_enable & (1 << card->myid)) 
			    && (i = hysdn_net_create(card))) 
			{
				ergo_stopcard(card);
				card->state = CARD_STATE_BOOTERR;
				return (i);
			}
#ifdef CONFIG_HYSDN_CAPI
			if((i = hycapi_capi_create(card))) {
				printk(KERN_WARNING "HYSDN: failed to create capi-interface.\n");
			}
#endif /* CONFIG_HYSDN_CAPI */
			return (0);	/* success */
		}		/* data has arrived */
		sti();
		msleep_interruptible(50);		/* Timeout 50ms */
	}			/* wait until timeout */

	if (card->debug_flags & LOG_POF_CARD)
		hysdn_addlog(card, "ERGO: pof boot ready timeout");
	return (-ERR_POF_TIMEOUT);
}				/* ergo_waitpofready */



/************************************************************************************/
/* release the cards hardware. Before releasing do a interrupt disable and hardware */
/* reset. Also unmap dpram.                                                         */
/* Use only during module release.                                                  */
/************************************************************************************/
static void
ergo_releasehardware(hysdn_card * card)
{
	ergo_stopcard(card);	/* first stop the card if not already done */
	free_irq(card->irq, card);	/* release interrupt */
	release_region(card->iobase + PCI9050_INTR_REG, 1);	/* release all io ports */
	release_region(card->iobase + PCI9050_USER_IO, 1);
	vfree(card->dpram);
	card->dpram = NULL;	/* release shared mem */
}				/* ergo_releasehardware */


/*********************************************************************************/
/* acquire the needed hardware ports and map dpram. If an error occurs a nonzero */
/* value is returned.                                                            */
/* Use only during module init.                                                  */
/*********************************************************************************/
int
ergo_inithardware(hysdn_card * card)
{
	if (!request_region(card->iobase + PCI9050_INTR_REG, 1, "HYSDN")) 
		return (-1);
	if (!request_region(card->iobase + PCI9050_USER_IO, 1, "HYSDN")) {
		release_region(card->iobase + PCI9050_INTR_REG, 1);
		return (-1);	/* ports already in use */
	}
	card->memend = card->membase + ERG_DPRAM_PAGE_SIZE - 1;
	if (!(card->dpram = ioremap(card->membase, ERG_DPRAM_PAGE_SIZE))) {
		release_region(card->iobase + PCI9050_INTR_REG, 1);
		release_region(card->iobase + PCI9050_USER_IO, 1);
		return (-1);
	}

	ergo_stopcard(card);	/* disable interrupts */
	if (request_irq(card->irq, ergo_interrupt, SA_SHIRQ, "HYSDN", card)) {
		ergo_releasehardware(card); /* return the acquired hardware */
		return (-1);
	}
	/* success, now setup the function pointers */
	card->stopcard = ergo_stopcard;
	card->releasehardware = ergo_releasehardware;
	card->testram = ergo_testram;
	card->writebootimg = ergo_writebootimg;
	card->writebootseq = ergo_writebootseq;
	card->waitpofready = ergo_waitpofready;
	card->set_errlog_state = ergo_set_errlog_state;
	INIT_WORK(&card->irq_queue, (void *) (void *) ergo_irq_bh, card);

	return (0);
}				/* ergo_inithardware */