The pinctrl pull up/down register on exynos4210 is 2-bit wide for each
pin and it accepts only values of 0, 1 and 3.  The pins sd4-bus-width8
were configured with value of 4.  The driver does not validate the value
so this overflow effectively set a bit 1 in adjacent pins thus
configuring them to pull down.

The author's intention was probably to set drive strength of 4x.  All
other bus-widths pins are configured with pull up and drive strength of
4x.  Fix this one with same pattern.

Fixes: 87711d8c ("ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC")
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>