• Peter Zijlstra's avatar
    perf annotate: Add branch stack / basic block · 70fbe057
    Peter Zijlstra authored
    I wanted to know the hottest path through a function and figured the
    branch-stack (LBR) information should be able to help out with that.
    
    The below uses the branch-stack to create basic blocks and generate
    statistics from them.
    
            from    to              branch_i
            * ----> *
                    |
                    | block
                    v
                    * ----> *
                    from    to      branch_i+1
    
    The blocks are broken down into non-overlapping ranges, while tracking
    if the start of each range is an entry point and/or the end of a range
    is a branch.
    
    Each block iterates all ranges it covers (while splitting where required
    to exactly match the block) and increments the 'coverage' count.
    
    For the range including the branch we increment the taken counter, as
    well as the pred counter if flags.predicted.
    
    Using these number we can find if an instruction:
    
     - had coverage; given by:
    
            br->coverage / br->sym->max_coverage
    
       This metric ensures each symbol has a 100% spot, which reflects the
       observation that each symbol must have a most covered/hottest
       block.
    
     - is a branch target: br->is_target && br->start == add
    
     - for targets, how much of a branch's coverages comes from it:
    
    	target->entry / branch->coverage
    
     - is a branch: br->is_branch && br->end == addr
    
     - for branches, how often it was taken:
    
            br->taken / br->coverage
    
       after all, all execution that didn't take the branch would have
       incremented the coverage and continued onward to a later branch.
    
     - for branches, how often it was predicted:
    
            br->pred / br->taken
    
    The coverage percentage is used to color the address and asm sections;
    for low (<1%) coverage we use NORMAL (uncolored), indicating that these
    instructions are not 'important'. For high coverage (>75%) we color the
    address RED.
    
    For each branch, we add an asm comment after the instruction with
    information on how often it was taken and predicted.
    
    Output looks like (sans color, which does loose a lot of the
    information :/)
    
    $ perf record --branch-filter u,any -e cycles:p ./branches 27
    $ perf annotate branches
    
     Percent |	Source code & Disassembly of branches for cycles:pu (217 samples)
    ---------------------------------------------------------------------------------
             :	branches():
        0.00 :	  40057a:       push   %rbp
        0.00 :	  40057b:       mov    %rsp,%rbp
        0.00 :	  40057e:       sub    $0x20,%rsp
        0.00 :	  400582:       mov    %rdi,-0x18(%rbp)
        0.00 :	  400586:       mov    %rsi,-0x20(%rbp)
        0.00 :	  40058a:       mov    -0x18(%rbp),%rax
        0.00 :	  40058e:       mov    %rax,-0x10(%rbp)
        0.00 :	  400592:       movq   $0x0,-0x8(%rbp)
        0.00 :	  40059a:       jmpq   400656 <branches+0xdc>
        1.84 :	  40059f:       mov    -0x10(%rbp),%rax	# +100.00%
        3.23 :	  4005a3:       and    $0x1,%eax
        1.84 :	  4005a6:       test   %rax,%rax
        0.00 :	  4005a9:       je     4005bf <branches+0x45>	# -54.50% (p:42.00%)
        0.46 :	  4005ab:       mov    0x200bbe(%rip),%rax        # 601170 <acc>
       12.90 :	  4005b2:       add    $0x1,%rax
        2.30 :	  4005b6:       mov    %rax,0x200bb3(%rip)        # 601170 <acc>
        0.46 :	  4005bd:       jmp    4005d1 <branches+0x57>	# -100.00% (p:100.00%)
        0.92 :	  4005bf:       mov    0x200baa(%rip),%rax        # 601170 <acc>	# +49.54%
       13.82 :	  4005c6:       sub    $0x1,%rax
        0.46 :	  4005ca:       mov    %rax,0x200b9f(%rip)        # 601170 <acc>
        2.30 :	  4005d1:       mov    -0x10(%rbp),%rax	# +50.46%
        0.46 :	  4005d5:       mov    %rax,%rdi
        0.46 :	  4005d8:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
        0.00 :	  4005dd:       mov    %rax,-0x10(%rbp)	# +100.00%
        0.92 :	  4005e1:       mov    -0x18(%rbp),%rax
        0.00 :	  4005e5:       and    $0x1,%eax
        0.00 :	  4005e8:       test   %rax,%rax
        0.00 :	  4005eb:       je     4005ff <branches+0x85>	# -100.00% (p:100.00%)
        0.00 :	  4005ed:       mov    0x200b7c(%rip),%rax        # 601170 <acc>
        0.00 :	  4005f4:       shr    $0x2,%rax
        0.00 :	  4005f8:       mov    %rax,0x200b71(%rip)        # 601170 <acc>
        0.00 :	  4005ff:       mov    -0x10(%rbp),%rax	# +100.00%
        7.37 :	  400603:       and    $0x1,%eax
        3.69 :	  400606:       test   %rax,%rax
        0.00 :	  400609:       jne    400612 <branches+0x98>	# -59.25% (p:42.99%)
        1.84 :	  40060b:       mov    $0x1,%eax
       14.29 :	  400610:       jmp    400617 <branches+0x9d>	# -100.00% (p:100.00%)
        1.38 :	  400612:       mov    $0x0,%eax	# +57.65%
       10.14 :	  400617:       test   %al,%al	# +42.35%
        0.00 :	  400619:       je     40062f <branches+0xb5>	# -57.65% (p:100.00%)
        0.46 :	  40061b:       mov    0x200b4e(%rip),%rax        # 601170 <acc>
        2.76 :	  400622:       sub    $0x1,%rax
        0.00 :	  400626:       mov    %rax,0x200b43(%rip)        # 601170 <acc>
        0.46 :	  40062d:       jmp    400641 <branches+0xc7>	# -100.00% (p:100.00%)
        0.92 :	  40062f:       mov    0x200b3a(%rip),%rax        # 601170 <acc>	# +56.13%
        2.30 :	  400636:       add    $0x1,%rax
        0.92 :	  40063a:       mov    %rax,0x200b2f(%rip)        # 601170 <acc>
        0.92 :	  400641:       mov    -0x10(%rbp),%rax	# +43.87%
        2.30 :	  400645:       mov    %rax,%rdi
        0.00 :	  400648:       callq  400526 <lfsr>	# -100.00% (p:100.00%)
        0.00 :	  40064d:       mov    %rax,-0x10(%rbp)	# +100.00%
        1.84 :	  400651:       addq   $0x1,-0x8(%rbp)
        0.92 :	  400656:       mov    -0x8(%rbp),%rax
        5.07 :	  40065a:       cmp    -0x20(%rbp),%rax
        0.00 :	  40065e:       jb     40059f <branches+0x25>	# -100.00% (p:100.00%)
        0.00 :	  400664:       nop
        0.00 :	  400665:       leaveq
        0.00 :	  400666:       retq
    
    (Note: the --branch-filter u,any was used to avoid spurious target and
    branch points due to interrupts/faults, they show up as very small -/+
    annotations on 'weird' locations)
    
    Committer note:
    
    Please take a look at:
    
      http://vger.kernel.org/~acme/perf/annotate_basic_blocks.png
    
    To see the colors.
    Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
    Tested-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
    Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
    Cc: Andi Kleen <andi@firstfloor.org>
    Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
    Cc: David Carrillo-Cisneros <davidcc@google.com>
    Cc: Jiri Olsa <jolsa@kernel.org>
    Cc: Kan Liang <kan.liang@intel.com>
    Cc: Linus Torvalds <torvalds@linux-foundation.org>
    Cc: Namhyung Kim <namhyung@kernel.org>
    Cc: Stephane Eranian <eranian@google.com>
    [ Moved sym->max_coverage to 'struct annotate', aka symbol__annotate(sym) ]
    Signed-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
    70fbe057
Build 5.63 KB