• Patrick McHardy's avatar
    tipc: add InfiniBand media type · a29a194a
    Patrick McHardy authored
    Add InfiniBand media type based on the ethernet media type.
    
    The only real difference is that in case of InfiniBand, we need the entire
    20 bytes of space reserved for media addresses, so the TIPC media type ID is
    not explicitly stored in the packet payload.
    
    Sample output of tipc-config:
    
    # tipc-config -v -addr -netid -nt=all -p -m -b -n -ls
    
    node address: <10.1.4>
    current network id: 4711
    Type       Lower      Upper      Port Identity              Publication Scope
    0          167776257  167776257  <10.1.1:1855512577>        1855512578  cluster
               167776260  167776260  <10.1.4:1216454657>        1216454658  zone
    1          1          1          <10.1.4:1216479235>        1216479236  node
    Ports:
    1216479235: bound to {1,1}
    1216454657: bound to {0,167776260}
    Media:
    eth
    ib
    Bearers:
    ib:ib0
    Nodes known:
    <10.1.1>: up
    Link <broadcast-link>
      Window:20 packets
      RX packets:0 fragments:0/0 bundles:0/0
      TX packets:0 fragments:0/0 bundles:0/0
      RX naks:0 defs:0 dups:0
      TX naks:0 acks:0 dups:0
      Congestion bearer:0 link:0  Send queue max:0 avg:0
    
    Link <10.1.4:ib0-10.1.1:ib0>
      ACTIVE  MTU:2044  Priority:10  Tolerance:1500 ms  Window:50 packets
      RX packets:80 fragments:0/0 bundles:0/0
      TX packets:40 fragments:0/0 bundles:0/0
      TX profile sample:22 packets  average:54 octets
      0-64:100% -256:0% -1024:0% -4096:0% -16384:0% -32768:0% -66000:0%
      RX states:410 probes:213 naks:0 defs:0 dups:0
      TX states:410 probes:197 naks:0 acks:0 dups:0
      Congestion bearer:0 link:0  Send queue max:1 avg:0
    Signed-off-by: default avatarPatrick McHardy <kaber@trash.net>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    a29a194a
core.c 4.68 KB