Merge tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 updates for v6.8

Support is added for the new Snapdragon 8 Gen 3 mobile platform, with
support for the MTP and QRD development devices, the new Snapdragon X
Elite compute platform with QCP and CRD development/references devices,
the QCS6590/QCM6490 platform with support for the IDP development device
and the Robotics RB3gen2 board, the Huawei Honor 5X/GR5 handset
built on MSM8939, and Xiaomi Pad 6 on SM8250.

On IPQ5018 and IPQ6018 platform support for CPUfreq, USB, and one
additional QUP SPI controller is added.

CPU OPP tables are selectively enabled based on fuses, for both IPQ5332
and IPQ6018. IPQ6018 gains description of a few more SPI and UART nodes.

Common elements of the IPQ9574 RDP boards are refactored into a common
include file. IPQ9574 also gains description of its LEDs and WPS
busttons.

MSM8916 finally gets the DSP-based audio described, and this is enabled
for a variety of boards. Acer Iconia Talk S and Loncheer L8910 gains
notification LED, battery and charger support is added to Loncheer
L8150, and GPU is enabled for Samsung Galaxy Tab A.

Similariy DSP-based audio is added on MSM8939, the BAM-DMUX support is
enabled as well. The Longcheer L9100 gains RGB notification LED support,
and the wireless subsystem is enabled.

Missing SPI controllers are described on MSM8953. On MSM8996 the MPM is
enabled, to allow using wakeup interrupts. Interconnect providers, MPM
and display are added to QCM2290.

UFS, remoteprocs and WiFi is enabled for Fairphone FP5.
On Fairphone FP3 audio, WiFi and Bluetooth are enabled.

On the Robotics RB1, HDMI and the CAN bus controller are added. On
Robotics RB2 Bluetooth, the modem remoteproc and WiFi are enabled.
Bluetooth is enabled on the Robotics RB5.

On SA8775P tsens and thermal is added, as well as the random number
generator.

Sound and RTC support is added for the Acer Aspire 1.

On SC7280 DeviceTree is refactored, in order to allow non-Chrome devices
to inherit the base dtsi. Support for UFS, crypto, TrustZone based
remoteprocs, the Camera Control Interface (CCI) and random number
generator support are added. Additionally a variety of smaller fixes are
introduced.

A variety of fixes are introduced for SC8180X, in particular missing
power-domains and interconnects.

On SC8280XP the camera clock controller is added, and a number of
smaller fixes are introduced.

The display subsystem in SDM670 is described.

On SDX75 interconnect providers are added, as is USB3 and the related
PHY, which is then enabled on the IDP device.

On SM6115 interconnect providers are added and existing clients are
wired up. A UART controller is added as well.

The MPM is added, to provide wakeup interrutps, on SM6375. The modem
subsystem, and WiFi are enabled on Sony Xperia 10 IV, a few regulator
supplies are corrected.

On SM8150 the DisplayPort controller is added, for USB Type-C output,
which together with the addition of HDMI is described on the HDK board.

GPU and random number generator support are added to SM8450, and enabled
on the HDK board.

On SM8550 GPU, IPA, random number generator, missing SoundWire ports are
added, and enabled on both MTP and QRD devices.

Additionally a large number of smaller functional and DeviceTree binding
validation issues are corrected across a variety of platforms.

* tag 'qcom-arm64-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (288 commits)
  arm64: dts: qcom: sc8180x-primus: Allow UFS regulators load/mode setting
  arm64: dts: qcom: sc8180x: Describe the GIC redistributor
  arm64: dts: qcom: sc8180x: Add interconnects to UFS
  arm64: dts: qcom: sc8180x: Add missing MDP clocks
  arm64: dts: qcom: sc8180x: Add UFS GDSC
  arm64: dts: qcom: sc7280*: move MPSS and WPSS memory to dtsi
  arm64: dts: qcom: sc7280: Rename reserved-memory nodes
  arm64: dts: qcom: sc7280: Remove unused second MPSS reg
  arm64: dts: qcom: sdm670: add display subsystem
  arm64: dts: qcom: sm8150-hdk: enable DisplayPort and USB-C altmode
  arm64: dts: qcom: sm8150: add USB-C ports to the OTG USB host
  arm64: dts: qcom: sm8150: add USB-C ports to the USB+DP QMP PHY
  arm64: dts: qcom: sm8150: add DisplayPort controller
  arm64: dts: qcom: sm8150-hdk: fix SS USB regulators
  arm64: dts: qcom: sm8150-hdk: enable HDMI output
  arm64: dts: qcom: sm8150: make dispcc cast minimal vote on MMCX
  arm64: dts: qcom: sm8650: add fastrpc-compute-cb nodes
  arm64: dts: qcom: sm8550-qrd: add PM8010 regulators
  arm64: dts: qcom: sm8550-mtp: Add pm8010 regulators
  arm64: dts: qcom: qcm2290: Hook up MPM
  ...

Link: https://lore.kernel.org/r/20231219145402.874161-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>