• Jean Pihet's avatar
    ARM: pm: omap3: run the ASM sleep code from DDR · 46e130d2
    Jean Pihet authored
    Most of the ASM sleep code (in arch/arm/mach-omap2/sleep34xx.S)
    is copied to internal SRAM at boot and after wake-up from CORE OFF
    mode.  However only a small part of the code really needs to run from
    internal SRAM.
    
    This fix lets most of the ASM idle code run from the DDR in order to
    minimize the SRAM usage and the overhead in the code copy.
    
    The only pieces of code that are mandatory in SRAM are:
    - the i443 erratum WA,
    - the i581 erratum WA,
    - the security extension code.
    
    SRAM usage:
    - original code:
      . 560 bytes for omap3_sram_configure_core_dpll (used by DVFS),
      . 852 bytes for omap_sram_idle (used by suspend/resume in RETention),
      . 124 bytes for es3_sdrc_fix (used by suspend/resume in OFF mode on ES3.x),
      . 108 bytes for save_secure_ram_context (used on HS parts only).
    
    With this fix the usage for suspend/resume in RETention goes down 288
    bytes, so the gain in SRAM usage for suspend/resume is 564 bytes.
    
    Also fixed the SRAM initialization sequence to avoid an unnecessary
    copy to SRAM at boot time and for readability.
    
    Tested on Beagleboard (ES2.x) in idle with full RET and OFF modes.
    
    Kevin Hilman tested retention and off on 3430/n900, 3530/Overo and
    3630/Zoom3
    Signed-off-by: default avatarJean Pihet <j-pihet@ti.com>
    Reviewed-by: default avatarKevin Hilman <khilman@ti.com>
    Tested-by: default avatarKevin Hilman <khilman@ti.com>
    Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
    46e130d2
sleep34xx.S 16.3 KB