• Wen Gong's avatar
    ath10k: enable rx duration report default for wmi tlv · 4913e675
    Wen Gong authored
    When run command "iw dev wlan0 station dump", the rx duration is 0.
    When firmware indicate WMI_UPDATE_STATS_EVENTID, extended flag of
    statsis not set by default, so firmware do not report rx duration.
    
    one sample:
    localhost # iw wlan0 station dump
    Station c4:04:15:5d:97:22 (on wlan0)
            inactive time:  48 ms
            rx bytes:       21670
            rx packets:     147
            tx bytes:       11529
            tx packets:     100
            tx retries:     88
            tx failed:      36
            beacon loss:    1
            beacon rx:      31
            rx drop misc:   47
            signal:         -72 [-74, -75] dBm
            signal avg:     -71 [-74, -75] dBm
            beacon signal avg:      -71 dBm
            tx bitrate:     54.0 MBit/s MCS 3 40MHz
            rx bitrate:     1.0 MBit/s
    	rx duration:    0 us
    
    This patch enable firmware's extened flag of stats by setting flag
    WMI_TLV_STAT_PEER_EXTD of ar->fw_stats_req_mask which is set in
    ath10k_core_init_firmware_features via WMI_REQUEST_STATS_CMDID.
    
    After apply this patch, rx duration show value with the command:
    Station c4:04:15:5d:97:22 (on wlan0)
            inactive time:  883 ms
            rx bytes:       44289
            rx packets:     265
            tx bytes:       10838
            tx packets:     93
            tx retries:     899
            tx failed:      103
            beacon loss:    0
            beacon rx:      78
            rx drop misc:   46
            signal:         -71 [-74, -76] dBm
            signal avg:     -70 [-74, -76] dBm
            beacon signal avg:      -70 dBm
            tx bitrate:     54.0 MBit/s MCS 3 40MHz
            rx bitrate:     1.0 MBit/s
            rx duration:    358004 us
    
    This patch do not have side effect for all chips, because function
    ath10k_debug_fw_stats_request is already exported to debugfs
    "fw_stats" and WMI_REQUEST_STATS_CMDID is safely sent after condition
    checked by ath10k_peer_stats_enabled in ath10k_sta_statistics.
    
    Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00042.
    Signed-off-by: default avatarWen Gong <wgong@codeaurora.org>
    Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
    Link: https://lore.kernel.org/r/20200423022758.5365-1-wgong@codeaurora.org
    4913e675
mac.c 233 KB