1/ The led_info array must be allocated to allow the full number
  of LEDs even if not all are present.  The array maybe be sparsely
  filled but it is indexed by device address so we must at least
  allocate as many slots as the highest address used.  It is easiest
  just to allocate all 7.

2/ range check the 'reg' value properly.

3/ led.flags must be initialised to zero, else all leds could
   be treated as GPIOs (depending on what happens to be on the stack).
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Bryan Wu <cooloney@gmail.com>