• Bjørn Mork's avatar
    USB: serial: option: add Olicard 600 · 84f3b43f
    Bjørn Mork authored
    This is a Qualcomm based device with a QMI function on interface 4.
    It is mode switched from 2020:2030 using a standard eject message.
    
    T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
    D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
    P:  Vendor=2020 ProdID=2031 Rev= 2.32
    S:  Manufacturer=Mobile Connect
    S:  Product=Mobile Connect
    S:  SerialNumber=0123456789ABCDEF
    C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
    E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
    E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
    E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
    E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
    E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
    E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
    E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
    
    Cc: stable@vger.kernel.org
    Signed-off-by: default avatarBjørn Mork <bjorn@mork.no>
    [ johan: use tabs to align comments in adjacent lines ]
    Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
    84f3b43f
option.c 120 KB