• Jean Delvare's avatar
    [PATCH] I2C: rename sysfs files, part 2 of 2 · 1f53a25a
    Jean Delvare authored
    Here is the second step of my sysfs renaming plan.
    
    This one does the following renames (as I already announced on the
    LKML):
    temp<n>_hyst  -> temp<n>_max_hyst or temp<n>_crit_hyst
    sensor<n>     -> temp<n>_type
    pwm<n>        -> fan<n>_pwm
    pwm<n>_enable -> fan<n>_pwm_enable
    vid           -> in<n>_ref
    
    The associated libsensors patch is here:
    http://jdelvare.net1.nerim.net/sensors/libsensors-sysfs-names-2.diff
    (not applied yet, on purpose)
    
    
    Note that the w83781d part is a bit more complex, not only because it is
    the only driver to require the 5 changes, but also because at some point
    the macros assume that the internal variable names match the sysfs
    names, so I had to change them too (better than rewriting the macros,
    methinks).
    
    For reference, here is the list of changes, by driver:
    
    asb100:
        hyst -> max_hyst (4)
        pwm -> fan_pwm (1)
        pwm_enable -> fan_pwm_enable (1)
        vid -> in_ref (1)
    fscher:
         pwm -> fan_pwm (3)
    gl518sm:
        hyst -> max_hyst (1)
    it87:
        sensor -> temp_type (3)
    lm75:
        hyst -> max_hyst (1)
    lm78:
        hyst -> max_hyst (1)
        vid -> in_ref (1)
    lm85:
        pwm -> fan_pwm (3)
        pwm_enable -> fan_pwm_enable (3)
        vid -> in_ref (1)
    lm90:
        hyst -> crit_hyst (2)
    via686a:
        hyst -> max_hyst (3)
    w83781d:
        hyst -> max_hyst (2)
        sensor -> temp_type (3)
        pwm -> fan_pwm (4)
        pwm_enable -> fan_pwm_enable (1)
        vid -> in_ref (1)
    
    There's also a documentation update. There will be one more after that
    (to make it more readable, no contents change), and a patch to lm83.c to
    bring it to compliance with the (new) standard. (If you wonder why I did
    not change it with the other drivers: because it was *already* not in
    compliance with the old standard. There's some real work to do for this
    one.)
    1f53a25a
fscher.c 20.4 KB