H_RPT_INVALIDATE does two types of TLB invalidations:

1. Process-scoped invalidations for guests when LPCR[GTSE]=0.
   This is currently not used in KVM as GTSE is not usually
   disabled in KVM.
2. Partition-scoped invalidations that an L1 hypervisor does on
   behalf of an L2 guest. This is currently handled
   by H_TLB_INVALIDATE hcall and this new replaces the old that.

This commit enables process-scoped invalidations for L1 guests.
Support for process-scoped and partition-scoped invalidations
from/for nested guests will be added separately.

Process scoped tlbie invalidations from L1 and nested guests
need RS register for TLBIE instruction to contain both PID and
LPID.  This patch introduces primitives that execute tlbie
instruction with both PID and LPID set in prepartion for
H_RPT_INVALIDATE hcall.

A description of H_RPT_INVALIDATE follows:

int64   /* H_Success: Return code on successful completion */
        /* H_Busy - repeat the call with the same */
        /* H_Parameter, H_P2, H_P3, H_P4, H_P5 : Invalid
	   parameters */
hcall(const uint64 H_RPT_INVALIDATE, /* Invalidate RPT
					translation
					lookaside information */
      uint64 id,        /* PID/LPID to invalidate */
      uint64 target,    /* Invalidation target */
      uint64 type,      /* Type of lookaside information */
      uint64 pg_sizes,  /* Page sizes */
      uint64 start,     /* Start of Effective Address (EA)
			   range (inclusive) */
      uint64 end)       /* End of EA range (exclusive) */

Invalidation targets (target)
-----------------------------
Core MMU        0x01 /* All virtual processors in the
			partition */
Core local MMU  0x02 /* Current virtual processor */
Nest MMU        0x04 /* All nest/accelerator agents
			in use by the partition */

A combination of the above can be specified,
except core and core local.

Type of translation to invalidate (type)
---------------------------------------
NESTED       0x0001  /* invalidate nested guest partition-scope */
TLB          0x0002  /* Invalidate TLB */
PWC          0x0004  /* Invalidate Page Walk Cache */
PRT          0x0008  /* Invalidate caching of Process Table
			Entries if NESTED is clear */
PAT          0x0008  /* Invalidate caching of Partition Table
			Entries if NESTED is set */

A combination of the above can be specified.

Page size mask (pages)
----------------------
4K              0x01
64K             0x02
2M              0x04
1G              0x08
All sizes       (-1UL)

A combination of the above can be specified.
All page sizes can be selected with -1.

Semantics: Invalidate radix tree lookaside information
           matching the parameters given.
* Return H_P2, H_P3 or H_P4 if target, type, or pageSizes parameters
  are different from the defined values.
* Return H_PARAMETER if NESTED is set and pid is not a valid nested
  LPID allocated to this partition
* Return H_P5 if (start, end) doesn't form a valid range. Start and
  end should be a valid Quadrant address and  end > start.
* Return H_NotSupported if the partition is not in running in radix
  translation mode.
* May invalidate more translation information than requested.
* If start = 0 and end = -1, set the range to cover all valid
  addresses. Else start and end should be aligned to 4kB (lower 11
  bits clear).
* If NESTED is clear, then invalidate process scoped lookaside
  information. Else pid specifies a nested LPID, and the invalidation
  is performed   on nested guest partition table and nested guest
  partition scope real addresses.
* If pid = 0 and NESTED is clear, then valid addresses are quadrant 3
  and quadrant 0 spaces, Else valid addresses are quadrant 0.
* Pages which are fully covered by the range are to be invalidated.
  Those which are partially covered are considered outside
  invalidation range, which allows a caller to optimally invalidate
  ranges that may   contain mixed page sizes.
* Return H_SUCCESS on success.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-4-bharata@linux.ibm.com