• Jean-François Dagenais's avatar
    w1: ds1wm: add a reset recovery parameter · f607e7fc
    Jean-François Dagenais authored
    This fixes a regression in 3.0 reported by Paul Parsons regarding the
    removal of the msleep(1) in the ds1wm_reset() function:
    
    : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying"
    : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270):
    :
    : <snip>
    : Driver for 1-wire Dallas network protocol.
    : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
    : 1-Wire driver for the DS2760 battery monitor  chip  - (c) 2004-2005, Szabolcs Gyurko
    : ds1wm ds1wm: pass: 1 bus error, retrying
    : ds1wm ds1wm: pass: 2 bus error, retrying
    : ds1wm ds1wm: pass: 3 bus error, retrying
    : ds1wm ds1wm: pass: 4 bus error, retrying
    : ds1wm ds1wm: pass: 5 bus error, retrying
    : ...
    :
    : The visible result is that the battery charging LED is erratic; sometimes
    : it works, mostly it doesn't.
    :
    : The linux-2.6.39 DS1WM 1-wire driver worked OK.  I haven't tried 3.0-rc1,
    : 3.0-rc2, or 3.0-rc3.
    
    This sleep should not be required on normal circuitry provided the
    pull-ups on the bus are correctly adapted to the slaves.  Unfortunately,
    this is not always the case.  The sleep is restored but as a parameter to
    the probe function in the pdata.
    
    [akpm@linux-foundation.org: coding-style fixes]
    Reported-by: default avatarPaul Parsons <lost.distance@yahoo.com>
    Tested-by: default avatarPaul Parsons <lost.distance@yahoo.com>
    Signed-off-by: default avatarJean-François Dagenais <dagenaisj@sonatest.com>
    Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
    Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
    Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
    f607e7fc
htc-pasic3.c 5.21 KB