Previously we accumulated hotplug events, then processed them, essentially
like this:

  events = 0
  do {
    status = read(Slot Status)
    status &= EVENT_MASK              # only look at events
    events |= status                  # accumulate events
    write(Slot Status, events)        # clear events
  } while (status)
  process events

The problem is that as soon as we clear events in Slot Status, the hardware
may send notifications for new events, and we lose information about the
first events.  For example, we might see two Presence Detect Changed
events, but lose the fact that the slot was temporarily empty:

  read  PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS clear  # slot empty
  write PCI_EXP_SLTSTA_PDC                                # clear PDC event
  read  PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS set    # slot occupied

The current code does not process a removal; it only processes the
insertion, which fails because we didn't remove the original device.

To avoid this problem, read Slot Status once and process all the events
before reading it again, like this:

  do {
    read events
    clear events
    process events
  } while (events)

[bhelgaas: changelog, add external loop around pciehp_isr()]
Tested-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>