[media] siano: break it into common, mmc and usb

siano is, in fact, 2 drivers: one for MMC and one for USB, plus
a common bus-independent code. Break it accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/Kconfig

@@ -163,6 +163,7 @@ source "drivers/media/radio/Kconfig"
 source "drivers/media/dvb-core/Kconfig"
 source "drivers/media/pci/Kconfig"
 source "drivers/media/usb/Kconfig"
+source "drivers/media/mmc/Kconfig"
 
 comment "Supported FireWire (IEEE 1394) Adapters"
 	depends on DVB_CORE && FIREWIRE

drivers/media/Makefile

@@ -11,5 +11,5 @@ endif
 obj-y += v4l2-core/ tuners/ common/ rc/ video/
 
 obj-$(CONFIG_VIDEO_DEV) += radio/
-obj-$(CONFIG_DVB_CORE)  += dvb-core/ pci/ dvb-frontends/ usb/
+obj-$(CONFIG_DVB_CORE)  += dvb-core/ pci/ dvb-frontends/ usb/ mmc/
 obj-$(CONFIG_DVB_FIREDTV) += firewire/

drivers/media/common/Kconfig

 source "drivers/media/common/b2c2/Kconfig"
 source "drivers/media/common/saa7146/Kconfig"
+source "drivers/media/common/siano/Kconfig"

drivers/media/common/Makefile

-obj-y += b2c2/ saa7146/
+obj-y += b2c2/ saa7146/ siano/

drivers/media/common/siano/Kconfig

+#
+# Siano Mobile Silicon Digital TV device configuration
+#
+
+config SMS_SIANO_MDTV
+	tristate
+	depends on DVB_CORE && RC_CORE && HAS_DMA
+	depends on SMS_USB_DRV || SMS_SDIO_DRV
+	default y
+	---help---
+	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
+
+	  To compile this driver as a module, choose M here
+	  (The module will be called smsmdtv).
+
+	  Further documentation on this driver can be found on the WWW
+	  at http://www.siano-ms.com/

drivers/media/common/siano/Makefile

+smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
+
+obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
+
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
+

drivers/media/mmc/Kconfig

+source "drivers/media/mmc/siano/Kconfig"

drivers/media/mmc/Makefile

+obj-y := siano/

drivers/media/mmc/siano/Kconfig

+#
+# Siano Mobile Silicon Digital TV device configuration
+#
+
+config SMS_SDIO_DRV
+	tristate "Siano SMS1xxx based MDTV via SDIO interface"
+	depends on DVB_CORE && RC_CORE && HAS_DMA
+	depends on MMC
+	---help---
+	  Choose if you would like to have Siano's support for SDIO interface

drivers/media/mmc/siano/Makefile

+obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
+
+ccflags-y += -Idrivers/media/dvb-core
+ccflags-y += -Idrivers/media/common/siano
+ccflags-y += $(extra-cflags-y) $(extra-cflags-m)
+

drivers/media/usb/siano/Kconfig

@@ -2,33 +2,9 @@
 # Siano Mobile Silicon Digital TV device configuration
 #
 
-config SMS_SIANO_MDTV
+config SMS_USB_DRV
 	tristate "Siano SMS1xxx based MDTV receiver"
 	depends on DVB_CORE && RC_CORE && HAS_DMA
-	---help---
-	  Choose Y or M here if you have MDTV receiver with a Siano chipset.
-
-	  To compile this driver as a module, choose M here
-	  (The module will be called smsmdtv).
-
-	  Further documentation on this driver can be found on the WWW
-	  at http://www.siano-ms.com/
-
-if SMS_SIANO_MDTV
-menu "Siano module components"
-
-# Hardware interfaces support
-
-config SMS_USB_DRV
-	tristate "USB interface support"
-	depends on DVB_CORE && USB
 	---help---
 	  Choose if you would like to have Siano's support for USB interface
 
-config SMS_SDIO_DRV
-	tristate "SDIO interface support"
-	depends on DVB_CORE && MMC
-	---help---
-	  Choose if you would like to have Siano's support for SDIO interface
-endmenu
-endif # SMS_SIANO_MDTV

drivers/media/usb/siano/Makefile

-
-smsmdtv-objs := smscoreapi.o sms-cards.o smsendian.o smsir.o
-
-obj-$(CONFIG_SMS_SIANO_MDTV) += smsmdtv.o smsdvb.o
 obj-$(CONFIG_SMS_USB_DRV) += smsusb.o
-obj-$(CONFIG_SMS_SDIO_DRV) += smssdio.o
 
 ccflags-y += -Idrivers/media/dvb-core
-
+ccflags-y += -Idrivers/media/common/siano
 ccflags-y += $(extra-cflags-y) $(extra-cflags-m)