Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

arch/arm/mach-omap1/board-innovator.c

@@ -416,13 +416,13 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		omap1_usb_init(&innovator1510_usb_config);
-		innovator_config[1].data = &innovator1510_lcd_config;
+		innovator_config[0].data = &innovator1510_lcd_config;
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX
 	if (cpu_is_omap1610()) {
 		omap1_usb_init(&h2_usb_config);
-		innovator_config[1].data = &innovator1610_lcd_config;
+		innovator_config[0].data = &innovator1610_lcd_config;
 	}
 #endif
 	omap_board_config = innovator_config;

arch/arm/mach-omap2/Kconfig

@@ -364,8 +364,8 @@ config OMAP3_SDRC_AC_TIMING
 	  going on could result in system crashes;
 
 config OMAP4_ERRATA_I688
-	bool "OMAP4 errata: Async Bridge Corruption (BROKEN)"
-	depends on ARCH_OMAP4 && BROKEN
+	bool "OMAP4 errata: Async Bridge Corruption"
+	depends on ARCH_OMAP4
 	select ARCH_HAS_BARRIERS
 	help
 	  If a data is stalled inside asynchronous bridge because of back

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3evm.c

@@ -381,7 +381,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI");
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+	gpio_leds[0].gpio = gpio + TWL4030_GPIO_MAX + 1;
 
 	platform_device_register(&leds_gpio);
 

arch/arm/mach-omap2/common.h

@@ -132,6 +132,7 @@ void omap3_map_io(void);
 void am33xx_map_io(void);
 void omap4_map_io(void);
 void ti81xx_map_io(void);
+void omap_barriers_init(void);
 
 /**
  * omap_test_timeout - busy-loop, testing a condition

arch/arm/mach-omap2/cpuidle44xx.c

@@ -65,7 +65,6 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 cpu1_state;
 	int idle_time;
-	int new_state_idx;
 	int cpu_id = smp_processor_id();
 
 	/* Used to keep track of the total time in idle */
@@ -84,8 +83,8 @@ static int omap4_enter_idle(struct cpuidle_device *dev,
 	 */
 	cpu1_state = pwrdm_read_pwrst(cpu1_pd);
 	if (cpu1_state != PWRDM_POWER_OFF) {
-		new_state_idx = drv->safe_state_index;
-		cx = cpuidle_get_statedata(&dev->states_usage[new_state_idx]);
+		index = drv->safe_state_index;
+		cx = cpuidle_get_statedata(&dev->states_usage[index]);
 	}
 
 	if (index > 0)

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -19,6 +19,8 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
 
 #include <plat/board.h>
 #include <plat/gpmc.h>
@@ -42,6 +44,50 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = {
 	.flags		= SMSC911X_USE_16BIT,
 };
 
+static struct regulator_consumer_supply gpmc_smsc911x_supply[] = {
+	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
+	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
+};
+
+/* Generic regulator definition to satisfy smsc911x */
+static struct regulator_init_data gpmc_smsc911x_reg_init_data = {
+	.constraints = {
+		.min_uV			= 3300000,
+		.max_uV			= 3300000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= ARRAY_SIZE(gpmc_smsc911x_supply),
+	.consumer_supplies	= gpmc_smsc911x_supply,
+};
+
+static struct fixed_voltage_config gpmc_smsc911x_fixed_reg_data = {
+	.supply_name		= "gpmc_smsc911x",
+	.microvolts		= 3300000,
+	.gpio			= -EINVAL,
+	.startup_delay		= 0,
+	.enable_high		= 0,
+	.enabled_at_boot	= 1,
+	.init_data		= &gpmc_smsc911x_reg_init_data,
+};
+
+/*
+ * Platform device id of 42 is a temporary fix to avoid conflicts
+ * with other reg-fixed-voltage devices. The real fix should
+ * involve the driver core providing a way of dynamically
+ * assigning a unique id on registration for platform devices
+ * in the same name space.
+ */
+static struct platform_device gpmc_smsc911x_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= 42,
+	.dev = {
+		.platform_data	= &gpmc_smsc911x_fixed_reg_data,
+	},
+};
+
 /*
  * Initialize smsc911x device connected to the GPMC. Note that we
  * assume that pin multiplexing is done in the board-*.c file,
@@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data)
 
 	gpmc_cfg = board_data;
 
+	ret = platform_device_register(&gpmc_smsc911x_regulator);
+	if (ret < 0) {
+		pr_err("Unable to register smsc911x regulators: %d\n", ret);
+		return;
+	}
+
 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
 		pr_err("Failed to request GPMC mem region\n");
 		return;

arch/arm/mach-omap2/hsmmc.c

@@ -428,6 +428,7 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
 void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
@@ -491,6 +492,11 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;

arch/arm/mach-omap2/io.c

@@ -307,6 +307,7 @@ void __init omapam33xx_map_common_io(void)
 void __init omap44xx_map_common_io(void)
 {
 	iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 

arch/arm/mach-omap2/mailbox.c

@@ -281,8 +281,16 @@ static struct omap_mbox mbox_iva_info = {
 	.ops	= &omap2_mbox_ops,
 	.priv	= &omap2_mbox_iva_priv,
 };
+#endif
 
-struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL };
+#ifdef CONFIG_ARCH_OMAP2
+struct omap_mbox *omap2_mboxes[] = {
+	&mbox_dsp_info,
+#ifdef CONFIG_SOC_OMAP2420
+	&mbox_iva_info,
+#endif
+	NULL
+};
 #endif
 
 #if defined(CONFIG_ARCH_OMAP4)

arch/arm/mach-omap2/mux.c

@@ -218,7 +218,7 @@ static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
 	return -ENODEV;
 }
 
-static int __init
+static int
 omap_mux_get_by_name(const char *muxname,
 			struct omap_mux_partition **found_partition,
 			struct omap_mux **found_mux)

arch/arm/mach-omap2/omap4-common.c

@@ -24,6 +24,7 @@
 
 #include <plat/irqs.h>
 #include <plat/sram.h>
+#include <plat/omap-secure.h>
 
 #include <mach/hardware.h>
 #include <mach/omap-wakeupgen.h>
@@ -43,6 +44,9 @@ static void __iomem *sar_ram_base;
 
 void __iomem *dram_sync, *sram_sync;
 
+static phys_addr_t paddr;
+static u32 size;
+
 void omap_bus_sync(void)
 {
 	if (dram_sync && sram_sync) {
@@ -52,18 +56,20 @@ void omap_bus_sync(void)
 	}
 }
 
-static int __init omap_barriers_init(void)
+/* Steal one page physical memory for barrier implementation */
+int __init omap_barrier_reserve_memblock(void)
 {
-	struct map_desc dram_io_desc[1];
-	phys_addr_t paddr;
-	u32 size;
-
-	if (!cpu_is_omap44xx())
-		return -ENODEV;
 
 	size = ALIGN(PAGE_SIZE, SZ_1M);
 	paddr = arm_memblock_steal(size, SZ_1M);
 
+	return 0;
+}
+
+void __init omap_barriers_init(void)
+{
+	struct map_desc dram_io_desc[1];
+
 	dram_io_desc[0].virtual = OMAP4_DRAM_BARRIER_VA;
 	dram_io_desc[0].pfn = __phys_to_pfn(paddr);
 	dram_io_desc[0].length = size;
@@ -75,9 +81,10 @@ static int __init omap_barriers_init(void)
 	pr_info("OMAP4: Map 0x%08llx to 0x%08lx for dram barrier\n",
 		(long long) paddr, dram_io_desc[0].virtual);
 
-	return 0;
 }
-core_initcall(omap_barriers_init);
+#else
+void __init omap_barriers_init(void)
+{}
 #endif
 
 void __init gic_init_irq(void)

arch/arm/mach-omap2/pm.c

@@ -174,14 +174,17 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name,
 	freq = clk->rate;
 	clk_put(clk);
 
+	rcu_read_lock();
 	opp = opp_find_freq_ceil(dev, &freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		pr_err("%s: unable to find boot up OPP for vdd_%s\n",
 			__func__, vdd_name);
 		goto exit;
 	}
 
 	bootup_volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 	if (!bootup_volt) {
 		pr_err("%s: unable to find voltage corresponding "
 			"to the bootup OPP for vdd_%s\n", __func__, vdd_name);

arch/arm/mach-omap2/usb-host.c

@@ -486,7 +486,7 @@ static void setup_4430ohci_io_mux(const enum usbhs_omap_port_mode *port_mode)
 void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 {
 	struct omap_hwmod	*oh[2];
-	struct omap_device	*od;
+	struct platform_device	*pdev;
 	int			bus_id = -1;
 	int			i;
 
@@ -522,11 +522,11 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
 		return;
 	}
 
-	od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+	pdev = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
 				(void *)&usbhs_data, sizeof(usbhs_data),
 				omap_uhhtll_latency,
 				ARRAY_SIZE(omap_uhhtll_latency), false);
-	if (IS_ERR(od)) {
+	if (IS_ERR(pdev)) {
 		pr_err("Could not build hwmod devices %s,%s\n",
 			USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
 		return;

arch/arm/plat-omap/common.c

@@ -69,6 +69,7 @@ void __init omap_reserve(void)
 	omap_vram_reserve_sdram_memblock();
 	omap_dsp_reserve_sdram_memblock();
 	omap_secure_ram_reserve_memblock();
+	omap_barrier_reserve_memblock();
 }
 
 void __init omap_init_consistent_dma_size(void)

arch/arm/plat-omap/include/plat/omap-secure.h

@@ -10,4 +10,10 @@ static inline void omap_secure_ram_reserve_memblock(void)
 { }
 #endif
 
+#ifdef CONFIG_OMAP4_ERRATA_I688
+extern int omap_barrier_reserve_memblock(void);
+#else
+static inline void omap_barrier_reserve_memblock(void)
+{ }
+#endif
 #endif /* __OMAP_SECURE_H__ */