arm64: dts: st: add i2c2 / i2c8 properties on stm32mp257f-ev1

Add properties for i2c2 and i2c8 available on the stm32mp257f-ev1.
i2c2 is enabled since several devices are attached to it while
i2c8 is kept disabled since only used via the gpio expansion connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

arch/arm64/boot/dts/st/stm32mp257f-ev1.dts

@@ -55,6 +55,26 @@ &arm_wdt {
 	status = "okay";
 };
 
+&i2c2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c2_pins_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <100>;
+	i2c-scl-falling-time-ns = <13>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c8 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c8_pins_a>;
+	pinctrl-1 = <&i2c8_sleep_pins_a>;
+	i2c-scl-rising-time-ns = <57>;
+	i2c-scl-falling-time-ns = <7>;
+	clock-frequency = <400000>;
+	status = "disabled";
+};
+
 &sdmmc1 {
 	pinctrl-names = "default", "opendrain", "sleep";
 	pinctrl-0 = <&sdmmc1_b4_pins_a>;