Skip to content

L
linux
Commit 008f08d6 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a couple of bugfixes for v4.8-rc.

  Most of them have actually been around for a while this time but for
  some reason didn't get applied early on.  The shmobile regulator fix
  is the only one that isn't completely obvious.

  Device tree changes:
   - archtimer interrupts must be level triggered (multiple platforms)
   - fix for USB and MMC clocks on STiH410
   - fix split DT repository in case of raspberry-pi 3
   - a new use of skeleton.dtsi on arm64 has crept in after that was
     removed.

  defconfig updates:
   - xilinx vdma has a new Kconfig symbol name
   - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1

  Code fixes:
   - fix regulator quirk on shmobile
   - suspend-to-ram regression on EXYNOS

  Maintainer updates:
   - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: keystone: defconfig: Fix USB configuration
  arm64: dts: Fix broken architected timer interrupt trigger
  ARM: multi_v7_defconfig: update XILINX_VDMA
  ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
  ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
  ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
  ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
  ARM: shmobile: fix regulator quirk for Gen2
  ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
  MAINTAINERS: Add myself as reviewer for Samsung Exynos support
parents cac4662a 64086491
Hide whitespace changes
Inline Side-by-side
Showing with 102 additions and 93 deletions
MAINTAINERS
View file @ 008f08d6
......@@ -1625,6 +1625,7 @@ N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
R: Javier Martinez Canillas <javier@osg.samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
......
arch/arm/boot/dts/bcm2835-rpi.dtsi
View file @ 008f08d6
......@@ -2,6 +2,7 @@
/ {
memory {
device_type = "memory";
reg = <0 0x10000000>;
};
......
arch/arm/boot/dts/bcm283x.dtsi
View file @ 008f08d6
......@@ -2,7 +2,6 @@
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/* This include file covers the common peripherals and configuration between
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to
......@@ -13,6 +12,8 @@ / {
compatible = "brcm,bcm2835";
model = "BCM2835";
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "earlyprintk console=ttyAMA0";
......
arch/arm/boot/dts/stih407-family.dtsi
View file @ 008f08d6
......@@ -550,8 +550,9 @@ mmc0: sdhci@09060000 {
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
clock-names = "mmc";
clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
bus-width = <8>;
non-removable;
};
......@@ -565,8 +566,9 @@ mmc1: sdhci@09080000 {
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
clock-names = "mmc";
clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
resets = <&softreset STIH407_MMC1_SOFTRESET>;
bus-width = <4>;
};
......
arch/arm/boot/dts/stih410.dtsi
View file @ 008f08d6
......@@ -41,7 +41,8 @@ ohci0: usb@9a03c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
......@@ -57,7 +58,8 @@ ehci0: usb@9a03e00 {
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
......@@ -71,7 +73,8 @@ ohci1: usb@9a83c00 {
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
......@@ -87,7 +90,8 @@ ehci1: usb@9a83e00 {
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
......
arch/arm/configs/keystone_defconfig
View file @ 008f08d6
......@@ -161,6 +161,7 @@ CONFIG_USB_MON=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
......
arch/arm/configs/multi_v7_defconfig
View file @ 008f08d6
......@@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_OMAP=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_XILINX_VDMA=y
CONFIG_XILINX_DMA=y
CONFIG_DMA_SUN6I=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y
......
arch/arm/mach-exynos/suspend.c
View file @ 008f08d6
......@@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
return -ENOMEM;
}
/*
* Clear the OF_POPULATED flag set in of_irq_init so that
* later the Exynos PMU platform device won't be skipped.
*/
of_node_clear_flag(node, OF_POPULATED);
return 0;
}
......
arch/arm/mach-shmobile/regulator-quirk-rcar-gen2.c
View file @ 008f08d6
......@@ -41,39 +41,26 @@
#define REGULATOR_IRQ_MASK BIT(2) /* IRQ2, active low */
static void __iomem *irqc;
static const u8 da9063_mask_regs[] = {
DA9063_REG_IRQ_MASK_A,
DA9063_REG_IRQ_MASK_B,
DA9063_REG_IRQ_MASK_C,
DA9063_REG_IRQ_MASK_D,
};
/* DA9210 System Control and Event Registers */
/* start of DA9210 System Control and Event Registers */
#define DA9210_REG_MASK_A 0x54
#define DA9210_REG_MASK_B 0x55
static const u8 da9210_mask_regs[] = {
DA9210_REG_MASK_A,
DA9210_REG_MASK_B,
};
static void da9xxx_mask_irqs(struct i2c_client *client, const u8 regs[],
unsigned int nregs)
{
unsigned int i;
dev_info(&client->dev, "Masking %s interrupt sources\n", client->name);
static void __iomem *irqc;
for (i = 0; i < nregs; i++) {
int error = i2c_smbus_write_byte_data(client, regs[i], ~0);
if (error) {
dev_err(&client->dev, "i2c error %d\n", error);
return;
}
}
}
/* first byte sets the memory pointer, following are consecutive reg values */
static u8 da9063_irq_clr[] = { DA9063_REG_IRQ_MASK_A, 0xff, 0xff, 0xff, 0xff };
static u8 da9210_irq_clr[] = { DA9210_REG_MASK_A, 0xff, 0xff };
static struct i2c_msg da9xxx_msgs[2] = {
{
.addr = 0x58,
.len = ARRAY_SIZE(da9063_irq_clr),
.buf = da9063_irq_clr,
}, {
.addr = 0x68,
.len = ARRAY_SIZE(da9210_irq_clr),
.buf = da9210_irq_clr,
},
};
static int regulator_quirk_notify(struct notifier_block *nb,
unsigned long action, void *data)
......@@ -93,12 +80,15 @@ static int regulator_quirk_notify(struct notifier_block *nb,
client = to_i2c_client(dev);
dev_dbg(dev, "Detected %s\n", client->name);
if ((client->addr == 0x58 && !strcmp(client->name, "da9063")))
da9xxx_mask_irqs(client, da9063_mask_regs,
ARRAY_SIZE(da9063_mask_regs));
else if (client->addr == 0x68 && !strcmp(client->name, "da9210"))
da9xxx_mask_irqs(client, da9210_mask_regs,
ARRAY_SIZE(da9210_mask_regs));
if ((client->addr == 0x58 && !strcmp(client->name, "da9063")) ||
(client->addr == 0x68 && !strcmp(client->name, "da9210"))) {
int ret;
dev_info(&client->dev, "clearing da9063/da9210 interrupts\n");
ret = i2c_transfer(client->adapter, da9xxx_msgs, ARRAY_SIZE(da9xxx_msgs));
if (ret != ARRAY_SIZE(da9xxx_msgs))
dev_err(&client->dev, "i2c error %d\n", ret);
}
mon = ioread32(irqc + IRQC_MONITOR);
if (mon & REGULATOR_IRQ_MASK)
......
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
View file @ 008f08d6
......@@ -255,10 +255,10 @@ sysmgr: sysmgr@ffd12000 {
/* Local timer */
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
timer0: timer0@ffc03000 {
......
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View file @ 008f08d6
......@@ -102,13 +102,13 @@ psci {
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>,
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_EDGE_RISING)>;
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
......
arch/arm64/boot/dts/apm/apm-storm.dtsi
View file @ 008f08d6
......@@ -110,10 +110,10 @@ gic: interrupt-controller@78010000 {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 0 0xff01>, /* Secure Phys IRQ */
<1 13 0xff01>, /* Non-secure Phys IRQ */
<1 14 0xff01>, /* Virt IRQ */
<1 15 0xff01>; /* Hyp IRQ */
interrupts = <1 0 0xff08>, /* Secure Phys IRQ */
<1 13 0xff08>, /* Non-secure Phys IRQ */
<1 14 0xff08>, /* Virt IRQ */
<1 15 0xff08>; /* Hyp IRQ */
clock-frequency = <50000000>;
};
......
arch/arm64/boot/dts/broadcom/bcm2835-rpi.dtsi 0 → 120000
View file @ 008f08d6
../../../../arm/boot/dts/bcm2835-rpi.dtsi
\ No newline at end of file
arch/arm64/boot/dts/broadcom/bcm2837-rpi-3-b.dts
View file @ 008f08d6
/dts-v1/;
#include "bcm2837.dtsi"
#include "../../../../arm/boot/dts/bcm2835-rpi.dtsi"
#include "../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi"
#include "bcm2835-rpi.dtsi"
#include "bcm283x-rpi-smsc9514.dtsi"
/ {
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
......
arch/arm64/boot/dts/broadcom/bcm2837.dtsi
View file @ 008f08d6
#include "../../../../arm/boot/dts/bcm283x.dtsi"
#include "bcm283x.dtsi"
/ {
compatible = "brcm,bcm2836";
......
arch/arm64/boot/dts/broadcom/bcm283x-rpi-smsc9514.dtsi 0 → 120000
View file @ 008f08d6
../../../../arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
\ No newline at end of file
arch/arm64/boot/dts/broadcom/bcm283x.dtsi 0 → 120000
View file @ 008f08d6
../../../../arm/boot/dts/bcm283x.dtsi
\ No newline at end of file
arch/arm64/boot/dts/broadcom/ns2.dtsi
View file @ 008f08d6
......@@ -88,13 +88,13 @@ psci {
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>,
IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_RAW(0xff) |
IRQ_TYPE_EDGE_RISING)>;
IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
......
arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
View file @ 008f08d6
......@@ -354,10 +354,10 @@ cpu@20f {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xff01>,
<1 14 0xff01>,
<1 11 0xff01>,
<1 10 0xff01>;
interrupts = <1 13 4>,
<1 14 4>,
<1 11 4>,
<1 10 4>;
};
pmu {
......
arch/arm64/boot/dts/exynos/exynos7.dtsi
View file @ 008f08d6
......@@ -473,10 +473,10 @@ hsi2c_11: hsi2c@136a0000 {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xff01>,
<1 14 0xff01>,
<1 11 0xff01>,
<1 10 0xff01>;
interrupts = <1 13 0xff08>,
<1 14 0xff08>,
<1 11 0xff08>,
<1 10 0xff08>;
};
pmu_system_controller: system-controller@105c0000 {
......
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
View file @ 008f08d6
......@@ -119,10 +119,10 @@ reboot {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0x1>, /* Physical Secure PPI */
<1 14 0x1>, /* Physical Non-Secure PPI */
<1 11 0x1>, /* Virtual PPI */
<1 10 0x1>; /* Hypervisor PPI */
interrupts = <1 13 0xf08>, /* Physical Secure PPI */
<1 14 0xf08>, /* Physical Non-Secure PPI */
<1 11 0xf08>, /* Virtual PPI */
<1 10 0xf08>; /* Hypervisor PPI */
};
pmu {
......
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
View file @ 008f08d6
......@@ -191,10 +191,10 @@ reboot {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
<1 14 0x8>, /* Physical Non-Secure PPI, active-low */
<1 11 0x8>, /* Virtual PPI, active-low */
<1 10 0x8>; /* Hypervisor PPI, active-low */
interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
<1 14 4>, /* Physical Non-Secure PPI, active-low */
<1 11 4>, /* Virtual PPI, active-low */
<1 10 4>; /* Hypervisor PPI, active-low */
};
pmu {
......
arch/arm64/boot/dts/marvell/armada-ap806.dtsi
View file @ 008f08d6
......@@ -122,10 +122,10 @@ gic_v2m3: v2m@2b0000 {
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
odmi: odmi@300000 {
......
arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi
View file @ 008f08d6
......@@ -129,10 +129,10 @@ i2c_clk: i2c_clk {
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
interrupts = <1 13 4>,
<1 14 4>,
<1 11 4>,
<1 10 4>;
};
soc {
......
arch/arm64/boot/dts/xilinx/zynqmp.dtsi
View file @ 008f08d6
......@@ -65,10 +65,10 @@ psci {
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
interrupts = <1 13 0xf08>,
<1 14 0xf08>,
<1 11 0xf08>,
<1 10 0xf08>;
};
amba_apu {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7