Commit 01553d9a authored by Sebastian Ott's avatar Sebastian Ott Committed by Martin Schwidefsky

s390/pci: fix handling of PEC 306

In contrast to other hotplug events PEC 0x306 isn't about a single
but multiple devices. Also there's no information on what happened
to these devices. We correctly handled hotplug that way but failed
to handle hot-unplug. This patch addresses that and implements
hot-unplug of multiple devices via PEC 306.
Signed-off-by: default avatarSebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: default avatarGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
parent 623bd44d
......@@ -161,9 +161,9 @@ int zpci_create_device(struct zpci_dev *);
void zpci_remove_device(struct zpci_dev *zdev);
int zpci_enable_device(struct zpci_dev *);
int zpci_disable_device(struct zpci_dev *);
void zpci_stop_device(struct zpci_dev *);
int zpci_register_ioat(struct zpci_dev *, u8, u64, u64, u64);
int zpci_unregister_ioat(struct zpci_dev *, u8);
void zpci_remove_reserved_devices(void);
/* CLP */
int clp_scan_pci_devices(void);
......
......@@ -86,6 +86,25 @@ struct zpci_dev *get_zdev_by_fid(u32 fid)
return zdev;
}
void zpci_remove_reserved_devices(void)
{
struct zpci_dev *tmp, *zdev;
enum zpci_state state;
LIST_HEAD(remove);
spin_lock(&zpci_list_lock);
list_for_each_entry_safe(zdev, tmp, &zpci_list, entry) {
if (zdev->state == ZPCI_FN_STATE_STANDBY &&
!clp_get_state(zdev->fid, &state) &&
state == ZPCI_FN_STATE_RESERVED)
list_move_tail(&zdev->entry, &remove);
}
spin_unlock(&zpci_list_lock);
list_for_each_entry_safe(zdev, tmp, &remove, entry)
zpci_remove_device(zdev);
}
static struct zpci_dev *get_zdev_by_bus(struct pci_bus *bus)
{
return (bus && bus->sysdata) ? (struct zpci_dev *) bus->sysdata : NULL;
......@@ -845,16 +864,6 @@ int zpci_create_device(struct zpci_dev *zdev)
return rc;
}
void zpci_stop_device(struct zpci_dev *zdev)
{
zpci_dma_exit_device(zdev);
/*
* Note: SCLP disables fh via set-pci-fn so don't
* do that here.
*/
}
EXPORT_SYMBOL_GPL(zpci_stop_device);
void zpci_remove_device(struct zpci_dev *zdev)
{
if (!zdev->bus)
......
......@@ -334,14 +334,6 @@ static int clp_list_pci(struct clp_req_rsp_list_pci *rrb, void *data,
}
static void __clp_add(struct clp_fh_list_entry *entry, void *data)
{
if (!entry->vendor_id)
return;
clp_add_pci_device(entry->fid, entry->fh, entry->config_state);
}
static void __clp_rescan(struct clp_fh_list_entry *entry, void *data)
{
struct zpci_dev *zdev;
......@@ -349,19 +341,8 @@ static void __clp_rescan(struct clp_fh_list_entry *entry, void *data)
return;
zdev = get_zdev_by_fid(entry->fid);
if (!zdev) {
if (!zdev)
clp_add_pci_device(entry->fid, entry->fh, entry->config_state);
return;
}
if (!entry->config_state) {
/*
* The handle is already disabled, that means no iota/irq freeing via
* the firmware interfaces anymore. Need to free resources manually
* (DMA memory, debug, sysfs)...
*/
zpci_stop_device(zdev);
}
}
static void __clp_update(struct clp_fh_list_entry *entry, void *data)
......@@ -398,11 +379,13 @@ int clp_rescan_pci_devices(void)
struct clp_req_rsp_list_pci *rrb;
int rc;
zpci_remove_reserved_devices();
rrb = clp_alloc_block(GFP_KERNEL);
if (!rrb)
return -ENOMEM;
rc = clp_list_pci(rrb, NULL, __clp_rescan);
rc = clp_list_pci(rrb, NULL, __clp_add);
clp_free_block(rrb);
return rc;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment