Skip to content

L
linux
Commit 0198b3bc authored by Mike Frysinger's avatar Mike Frysinger
Browse files
Options

Blackfin: drop board resources for dead devices (pbx/ad9960) 

These hardware devices are dead and the drivers never cleaned up/merged,
so punt the useless board resource info.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent c4baebf2
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 304 deletions
arch/blackfin/mach-bf518/boards/ezbrd.c
View file @ 0198b3bc
...@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { ...@@ -199,15 +199,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = { static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -296,24 +287,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{ {
.modalias = "ad7877", .modalias = "ad7877",
......
arch/blackfin/mach-bf527/boards/cm_bf527.c
View file @ 0198b3bc
...@@ -495,13 +495,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -495,13 +495,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -509,15 +502,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { ...@@ -509,15 +502,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = { static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -591,15 +575,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -591,15 +575,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad1836_spi_chip_info, .controller_data = &ad1836_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
...@@ -610,24 +585,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -610,24 +585,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{ {
.modalias = "ad7877", .modalias = "ad7877",
......
arch/blackfin/mach-bf527/boards/ezbrd.c
View file @ 0198b3bc
...@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { ...@@ -263,15 +263,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = { static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -376,24 +367,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{ {
.modalias = "ad7877", .modalias = "ad7877",
......
arch/blackfin/mach-bf527/boards/ezkit.c
View file @ 0198b3bc
...@@ -512,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -512,13 +512,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -526,15 +519,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { ...@@ -526,15 +519,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = { static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -632,15 +616,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -632,15 +616,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad1836_spi_chip_info, .controller_data = &ad1836_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
...@@ -652,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -652,24 +627,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{ {
.modalias = "ad7877", .modalias = "ad7877",
......
arch/blackfin/mach-bf533/boards/H8606.c
View file @ 0198b3bc
...@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -201,15 +201,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x1c04,
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
/* Notice: for blackfin, the speed_hz is the value of register /* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */ * SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = { static struct spi_board_info bfin_spi_board_info[] __initdata = {
...@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -248,23 +239,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 4,
.bus_num = 1,
.chip_select = 3,
.controller_data = &spi_si3xxx_chip_info,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 4,
.bus_num = 1,
.chip_select = 2,
.controller_data = &spi_si3xxx_chip_info,
},
#endif
}; };
/* SPI (0) */ /* SPI (0) */
......
arch/blackfin/mach-bf533/boards/stamp.c
View file @ 0198b3bc
...@@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -219,15 +219,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = { static struct bfin5xx_spi_chip spidev_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -298,25 +289,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
{ {
.modalias = "spidev", .modalias = "spidev",
......
arch/blackfin/mach-bf537/boards/cm_bf537.c
View file @ 0198b3bc
...@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
......
arch/blackfin/mach-bf537/boards/pnav10.c
View file @ 0198b3bc
...@@ -293,13 +293,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -293,13 +293,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -366,15 +359,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -366,15 +359,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad1836_spi_chip_info, .controller_data = &ad1836_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
......
arch/blackfin/mach-bf537/boards/stamp.c
View file @ 0198b3bc
...@@ -549,13 +549,6 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = { ...@@ -549,13 +549,6 @@ static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
#include <linux/input.h> #include <linux/input.h>
#include <linux/input/ad714x.h> #include <linux/input/ad714x.h>
...@@ -698,15 +691,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = { ...@@ -698,15 +691,6 @@ static struct bfin5xx_spi_chip mmc_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_PBX)
static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
.ctl_reg = 0x4, /* send zero */
.enable_dma = 0,
.bits_per_word = 8,
.cs_change_per_word = 1,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#include <linux/spi/ad7877.h> #include <linux/spi/ad7877.h>
static struct bfin5xx_spi_chip spi_ad7877_chip_info = { static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
...@@ -906,16 +890,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -906,16 +890,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_INPUT_EVAL_AD7147EBZ) #if defined(CONFIG_INPUT_EVAL_AD7147EBZ)
{ {
.modalias = "ad714x_captouch", .modalias = "ad714x_captouch",
...@@ -940,24 +914,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -940,24 +914,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
#if defined(CONFIG_PBX)
{
.modalias = "fxs-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J11_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "fxo-spi",
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 8 - CONFIG_J19_JUMPER,
.controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{ {
.modalias = "ad7877", .modalias = "ad7877",
......
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View file @ 0198b3bc
...@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -101,13 +101,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -150,16 +143,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
......
arch/blackfin/mach-bf561/boards/cm_bf561.c
View file @ 0198b3bc
...@@ -98,13 +98,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -98,13 +98,6 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 0, .enable_dma = 0,
...@@ -146,15 +139,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -146,15 +139,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad1836_spi_chip_info, .controller_data = &ad1836_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
{
.modalias = "ad9960-spi",
.max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 1,
.controller_data = &ad9960_spi_chip_info,
},
#endif
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "mmc_spi", .modalias = "mmc_spi",
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7